Metallurgical and Materials Transactions A 1/2021

06.10.2020 | Topical Collection: Innovations in High Entropy Alloys and Bulk Metallic Glasses

Superplastic Behavior in High-Pressure Torsion-Processed Mo7.5Fe55Co18Cr12.5Ni7 Medium-Entropy Alloy

Nhung Thi-Cam Nguyen, Peyman Asghari-Rad, Jae Wung Bae, Praveen Sathiyamoorthi, Hyoung Seop Kim

11.11.2020 | Topical Collection: Innovations in High Entropy Alloys and Bulk Metallic Glasses

Deformation-Mode-Sensitive Behavior of CuZr-Based Bulk Metallic Glasses Under Dynamic Loading

Amir Rezvan, Baran Sarac, Viktor Soprunyuk, Florian Spieckermann, Christoph Gammer, Huaping Sheng, Nikolaus August Sifferlinger, Jürgen Eckert

03.11.2020 | Communication

In Situ Observation and Growth Kinetics of Bainite Laths in the Coarse-Grained Heat-Affected Zone of 2.25Cr-1Mo Heat-Resistant Steel During Simulated Welding

Yang Shen, Bo Chen, Cong Wang

Open Access 17.11.2020 | Communication

Application of 3D DIC-Assisted Residual Stress Measurements for Friction Stir Welding Weld from Ultrafine-Grained Aluminum

Tomasz Brynk, Marta Orłowska, Małgorzata Lewandowska

PDF-Version jetzt herunterladen Zum Volltext

Open Access 26.10.2020

Evidence of Martensitic Transformation in Fe-Mn-Al Steel Similar to Maraging Steel

Gurumayum Robert Kenedy, Yi-Jyun Lin, Wei-Chun Cheng

PDF-Version jetzt herunterladen Zum Volltext

17.11.2020

Influence of Thermal Treatment on Microstructure and Corrosion Behavior of Amorphous Fe40Ni40B12Si8 Alloy

Milica M. Vasić, Tomáš Žák, Naděžda Pizúrová, Ivana Stojković Simatović, Dragica M. Minić

24.10.2020

Hydrogen-Assisted Cracking Behavior of Ni Alloy 718: Microstructure, H Testing Protocol, and Fractography

Dhinakaran Sampath, Gideon Obasi, Roberto Morana, Robert Akid

30.10.2020

Influence of Grit Blasting on Residual Stress Depth Profile and Dislocation Density in Different Metallic Substrates

Tina Ghara, S. Paul, P. P. Bandyopadhyay

03.11.2020

Effect of Specimen Thickness on the Degradation of Mechanical Properties of Ferritic-Martensitic P91 Steel by Direct-fired Supercritical CO2 Power Cycle Environment

Sajedur R. Akanda, Richard P. Oleksak, Reyixiati Repukaiti, Kyle A. Rozman, Ömer N. Doğan

12.11.2020

Creep Deformation Behavior of Inconel 617 Alloy in the Temperature Range of 650 °C to 800 °C

Sumanta Bagui, Bibhu Prasad Sahu, Kinkar Laha, Soumitra Tarafder, Rahul Mitra

09.11.2020

Effect of Ta Addition on the Microstructure and Tensile Properties of a Ni-Co Base Superalloy

C. Z. Zhu, R. Zhang, C. Y. Cui, Y. Z. Zhou, Y. Yuan, Z. S. Yu, X. Liu, X. F. Sun

20.11.2020

The Correlation Between the Microstructural Parameters and Mechanical Properties of Reduced Activation Ferritic–Martensitic (RAFM) Steel: Influence of Roll Deformation and Medium Temperature Tempering

Chunliang Mao, Chenxi Liu, Guowang Liu, Liming Yu, Huijun Li, Ji Dong, Yongchang Liu

30.10.2020

Effect of Co Addition on the Creep Rupture Properties of 9Cr-1.8W-xCo Weld Metals

Fikret Kabakcı, Mustafa Acarer, Murat Baydoğan, A. Selçuk Keskinkılıç, Filiz K. Acar, Hüseyin Çimenoğlu

Open Access 18.11.2020

On the Formation of Eutectics in Variations of the Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy

A. M. Manzoni, F. Dubois, M. S. Mousa, C. von Schlippenbach, D. M. Többens, Y. Yesilcicek, E. Zaiser, R. Hesse, S. Haas, U. Glatzel

PDF-Version jetzt herunterladen Zum Volltext

13.11.2020

Texture and Microstructure Evolution During Single-Point Incremental Forming of Commercially Pure Titanium

Sumeet Mishra, K. U. Yazar, Amlan Kar, R. Lingam, N. V. Reddy, Om Prakash, Satyam Suwas

01.11.2020

Single Crystal Growth and Chemical Disorder Trapping of Refractory MoNbReTaW High-Entropy Alloy Solidified Under Electrostatic Levitation State

L. Hu, L. Wang, M. J. Lin, B. Wei

Open Access 17.11.2020

Evaluation of Hot Workability of Powder Metallurgy Ni-Based Superalloy with Different Initial Microstructures

Masaya Higashi, Naoya Kanno

PDF-Version jetzt herunterladen Zum Volltext

15.11.2020

Investigation of Solidification and Precipitation Behavior of Si-Modified 7075 Aluminum Alloy Fabricated by Laser-Based Powder Bed Fusion

Guichuan Li, Suraj Dinkar Jadhav, Arturo Martín, Maria L. Montero-Sistiaga, Jeroen Soete, Maria San Sebastian, Carmen M. Cepeda-Jiménez, Kim Vanmeensel

09.11.2020

Numerical Investigation on Molten Pool Dynamics During Multi-laser Array Powder Bed Fusion Process

Liu Cao

12.11.2020

Non-linear Transfer Functions for Accurately Estimating 3D Particle Size, Distribution, and Expected Error from 2D Cross Sections of a Lognormal Distribution of Spherical Particles

A. R. C. Gerlt, A. K. Criner, S. L. Semiatin, K. N. Wertz, E. J. Payton

15.11.2020

A Thermophysical Perspective of the Inter-relationship between Debye Temperature and Electron Density

Subramanian Raju

Open Access 20.11.2020

Numerical Interpretation of Hydrogen Thermal Desorption Spectra for Iron with Hydrogen-Enhanced Strain-Induced Vacancies

Ken-ichi Ebihara, Yuri Sugiyama, Ryosuke Matsumoto, Kenichi Takai, Tomoaki Suzudo

PDF-Version jetzt herunterladen Zum Volltext

09.11.2020

β-Texture Evolution of a Near-β Titanium Alloy During Cooling After Forging in the β Single-Phase and (α + β) Dual-Phase Regions

L. Meng, T. Kitashima, T. Tsuchiyama, M. Watanabe

09.11.2020

A New Dynamic Recrystallization Kinetics Model of Cast-Homogenized Magnesium Alloys

Jian Zeng, Fenghua Wang, Shuai Dong, Xi Nie, Yu Fan, Jie Dong

09.11.2020

Quantitative Investigation on the Slip/Twinning Activity and Cracking Behavior During Low-Cycle Fatigue of an Extruded Mg-3Y Sheet

Y. C. Deng, Z. J. Huang, T. J. Li, D. D. Yin, J. Zheng

03.11.2020

The Formation of Deformation Twin in Hybrid TiB-TiC Reinforced Titanium Matrix Composites

Xiaoyan Wang, Yuanfei Han, Xin Su, Guangfa Huang, Weijie Lu

12.11.2020

Correlating the Five-Parameter Grain Boundary Character Distribution and Corrosion Behavior of Zinc-Carbon Nanotube Composite Coatings

K. Sai Jyotheender, Chandan Srivastava

04.11.2020

Type-I Hot Corrosion of Ni-Base Superalloy CM247LC in Presence of Molten Na2SO4 Film

Mahesh K. Kumawat, Chandrakant Parlikar, Md. Zafir Alam, Dipak K. Das

Open Access 15.11.2020

Microstructure and Texture Evolution in a Post-dynamic Recrystallized Titanium During Annealing, Monotonic and Cyclic Loading

P.-C. Zhao, B. Chen, Z.-G. Zheng, B. Guan, X.-C. Zhang, S.-T. Tu

PDF-Version jetzt herunterladen Zum Volltext

26.10.2020

Investigations of Ternary Interdiffusion in β (BCC) Phase Field of Ti-Al-Mo Alloy System

Gyanendra Pratap Singh Chauhan, Kaustubh N. Kulkarni

Open Access 15.11.2020

The Effect of Micro-Segregation on the Quantification of Microstructural Parameters in Grade 91 Steel

Sharhid Jabar, John A. Siefert, Martin Strangwood, Geoff D. West

PDF-Version jetzt herunterladen Zum Volltext

21.11.2020 | Correction

Correction to: Texture Analysis of Additively Manufactured Ti-6Al-4V Deposited Using Different Scanning Strategies

Maria J. Quintana, Matthew J. Kenney, Priyanka Agrawal, Peter C. Collins

Springer Professional

Inhaltsverzeichnis (35 Artikel)

Superplastic Behavior in High-Pressure Torsion-Processed Mo7.5Fe55Co18Cr12.5Ni7 Medium-Entropy Alloy

Deformation-Mode-Sensitive Behavior of CuZr-Based Bulk Metallic Glasses Under Dynamic Loading

In Situ Observation and Growth Kinetics of Bainite Laths in the Coarse-Grained Heat-Affected Zone of 2.25Cr-1Mo Heat-Resistant Steel During Simulated Welding

Application of 3D DIC-Assisted Residual Stress Measurements for Friction Stir Welding Weld from Ultrafine-Grained Aluminum

Evidence of Martensitic Transformation in Fe-Mn-Al Steel Similar to Maraging Steel

Influence of Thermal Treatment on Microstructure and Corrosion Behavior of Amorphous Fe40Ni40B12Si8 Alloy

Hydrogen-Assisted Cracking Behavior of Ni Alloy 718: Microstructure, H Testing Protocol, and Fractography

Influence of Grit Blasting on Residual Stress Depth Profile and Dislocation Density in Different Metallic Substrates

Effect of Specimen Thickness on the Degradation of Mechanical Properties of Ferritic-Martensitic P91 Steel by Direct-fired Supercritical CO2 Power Cycle Environment

Creep Deformation Behavior of Inconel 617 Alloy in the Temperature Range of 650 °C to 800 °C

Effect of Ta Addition on the Microstructure and Tensile Properties of a Ni-Co Base Superalloy

The Correlation Between the Microstructural Parameters and Mechanical Properties of Reduced Activation Ferritic–Martensitic (RAFM) Steel: Influence of Roll Deformation and Medium Temperature Tempering

Effect of Co Addition on the Creep Rupture Properties of 9Cr-1.8W-xCo Weld Metals

On the Formation of Eutectics in Variations of the Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy

Texture and Microstructure Evolution During Single-Point Incremental Forming of Commercially Pure Titanium

Single Crystal Growth and Chemical Disorder Trapping of Refractory MoNbReTaW High-Entropy Alloy Solidified Under Electrostatic Levitation State

Evaluation of Hot Workability of Powder Metallurgy Ni-Based Superalloy with Different Initial Microstructures

Investigation of Solidification and Precipitation Behavior of Si-Modified 7075 Aluminum Alloy Fabricated by Laser-Based Powder Bed Fusion

Numerical Investigation on Molten Pool Dynamics During Multi-laser Array Powder Bed Fusion Process

Non-linear Transfer Functions for Accurately Estimating 3D Particle Size, Distribution, and Expected Error from 2D Cross Sections of a Lognormal Distribution of Spherical Particles

A Thermophysical Perspective of the Inter-relationship between Debye Temperature and Electron Density

Numerical Interpretation of Hydrogen Thermal Desorption Spectra for Iron with Hydrogen-Enhanced Strain-Induced Vacancies

Alloying Effects on the Oxygen Diffusion in Nb Alloys: A First-Principles Study

Magnetic Properties of Eu8GaxGe46−x (Nominal x = 16, 14, and 12) Type-I Clathrates

High-Strength Titanium-Based Alloy for Low-Temperature Superplastic Forming

β-Texture Evolution of a Near-β Titanium Alloy During Cooling After Forging in the β Single-Phase and (α + β) Dual-Phase Regions

A New Dynamic Recrystallization Kinetics Model of Cast-Homogenized Magnesium Alloys

Quantitative Investigation on the Slip/Twinning Activity and Cracking Behavior During Low-Cycle Fatigue of an Extruded Mg-3Y Sheet

The Formation of Deformation Twin in Hybrid TiB-TiC Reinforced Titanium Matrix Composites

Correlating the Five-Parameter Grain Boundary Character Distribution and Corrosion Behavior of Zinc-Carbon Nanotube Composite Coatings

Type-I Hot Corrosion of Ni-Base Superalloy CM247LC in Presence of Molten Na2SO4 Film

Microstructure and Texture Evolution in a Post-dynamic Recrystallized Titanium During Annealing, Monotonic and Cyclic Loading

Investigations of Ternary Interdiffusion in β (BCC) Phase Field of Ti-Al-Mo Alloy System

The Effect of Micro-Segregation on the Quantification of Microstructural Parameters in Grade 91 Steel

Correction to: Texture Analysis of Additively Manufactured Ti-6Al-4V Deposited Using Different Scanning Strategies

Aktuelle Ausgaben

Ausgabe 4/2023

Ausgabe 3/2023

Ausgabe 2/2023

Ausgabe 1/2023

Ausgabe 12/2022

Ausgabe 11/2022

Ausgabe 10/2022

Ausgabe 9/2022

Ausgabe 8/2022

Ausgabe 7/2022

Premium Partner

Marktübersichten