Ausgabe 10/2010
Inhalt (26 Artikel)
Formation of Delta Ferrite in 9 Wt Pct Cr Steel Investigated by In-Situ X-Ray Diffraction Using Synchrotron Radiation
P. Mayr, T.A. Palmer, J.W. Elmer, E.D. Specht, S.M. Allen
The Avrami Kinetics of Dynamic Recrystallization in Cadmium
A. Sarkar, J. K. Chakravartty, I. Samajdar
Development of Mn-Cr-(C-N) Corrosion Resistant Twinning Induced Plasticity Steels: Thermodynamic and Diffusion Calculations, Production, and Characterization
Laís Mújica Roncery, Sebastian Weber, Werner Theisen
Improvement in the Shape Memory Response of Ti50.5Ni24.5Pd25 High-Temperature Shape Memory Alloy with Scandium Microalloying
K.C. Atli, I. Karaman, R.D. Noebe, A. Garg, Y.I. Chumlyakov, I.V. Kireeva
Effect of Friction Stir Processing on Microstructure and Tensile Properties of an Investment Cast Al-7Si-0.6Mg Alloy
Saumyadeep Jana, Rajiv S. Mishra, John A. Baumann, Glenn J. Grant
Slip Systems and Initiation of Plasticity in a Body-Centered-Cubic Titanium Alloy
Alexis C. Lewis, Siddiq M. Qidwai, Andrew B. Geltmacher
Cyclic Deformation Behaviors of -Oriented Al Single Crystals
Peng Li, Shouxin Li, Zhongguang Wang, Zhefeng Zhang
Near-Neutral pH Stress Corrosion Cracking Susceptibility of Plastically Prestrained X70 Steel Weldment
Baotong Lu, Jing-Li Luo, Douglas G. Ivey
Hydrogen Effect against Hydrogen Embrittlement
Yukitaka Murakami, Toshihiko Kanezaki, Yoji Mine
Electrochemical Studies on Silicate and Bicarbonate Ions for Corrosion Inhibitors
Michael E. Mohorich, Joshua Lamb, Dhanesh Chandra, Jaak Daemen, Raul B. Rebak
Aging Effect on Texture Evolution during Warm Rolling of ZK60 Alloys Fabricated by Twin-Roll Casting
Jae-Hyung Cho, Hong-Mei Chen, Shi-Hoon Choi, Hyoung-Wook Kim, Suk-Bong Kang
Comparison of Different Synthesis Methods to Produce Lithium Triborate and Their Effects on Its Thermoluminescent Property
Tolga Depci, Gulhan Ozbayoglu, Aysen Yilmaz
Microstructural Evolution During the Hot Deformation of Ti-55Ni (at. pct) Intermetallic Alloy
Aliakbar Khamei, Kamran Dehghani
In-Situ Synthesis of Cu/Cr-Al2O3 Nanocomposite by Mechanical Alloying and Heat Treatment
Saeed Sheibani, Abolghasem Ataie, Saeed Heshmati-Manesh
Isothermal Phase Transformation in Biomedical Co-29Cr-6Mo Alloy without Addition of Carbon or Nitrogen
Shingo Kurosu, Hiroaki Matsumoto, Akihiko Chiba
Microstructure and Low-Cycle Fatigue of a Friction-Stir-Welded 6061 Aluminum Alloy
A.H. Feng, D.L. Chen, Z.Y. Ma
Resistance Spot Welded AZ31 Magnesium Alloys, Part II: Effects of Welding Current on Microstructure and Mechanical Properties
L. Liu, L. Xiao, J. C. Feng, Y. H. Tian, S. Q. Zhou, Y. Zhou
The Mechanisms of Resistance Spot Welding of Magnesium to Steel
L. Liu, L. Xiao, J.C. Feng, Y.H. Tian, S.Q. Zhou, Y. Zhou
Microstructure and Mechanical Properties of Extruded Magnesium-Aluminum-Cerium Alloy Tubes
Alan A. Luo, Wenyun Wu, Raj K. Mishra, Li Jin, Anil K. Sachdev, Wenjiang Ding
Analysis of Particle and Crystallite Size in Tungsten Nanopowder Synthesis
Olivia A. Graeve, Abhiram Madadi, Raghunath Kanakala, Kaustav Sinha
Formation and Stability of Equiatomic and Nonequiatomic Nanocrystalline CuNiCoZnAlTi High-Entropy Alloys by Mechanical Alloying
S. Varalakshmi, M. Kamaraj, B.S. Murty