Ausgabe 12/2025
Inhalt (35 Artikel)
A Simple Analytical Model for Grain Morphology Selection in In Situ Inoculated Additively Manufactured Al Alloys
- Brief Communication
Aoke Jiang, Shuo Ma
Analysis of Diffusion Depths and Diffusion Paths in β-(Ni,Pt)Al System
- Original Research Article
Biswarupa Samantaray, Dipak Das, Zafir Alam, Kaustubh N. Kulkarni
Cluster Strengthening Contribution to Yield Strength and Behind Mechanism of Heat-Treatable 6xxx Aluminum Alloys
- Original Research Article
Caisi Zhao, Jinglian Du, Zilin Zhang, Kunyu Zhang, Xiubo Yang, Kexing Song, Feng Liu
Strengthening in TiB-Reinforced Dual-phase Titanium Matrix Composites: Effect of TiB Volume Fraction and Matrix Microstructure
- Original Research Article
Zheyu Miao, Yu Chen, Qiang Li, Yakai Zhao, Kai Chen, Yimin Gao, Upadrasta Ramamurty
Development of a Solid Cohesion-Based Analytical Model for Predicting Norton–Hoff Viscous Parameters in Semi-Solid Aluminum Alloys and Its Experimental Validation
- Original Research Article
Yoshihiro Nagata, Yasuhiko Okimura, Ryosuke Miyachi, Naofumi Takatori, Toshimitsu Okane, Muhammad Khairi Faiz, Makoto Yoshida
Combustion Synthesis of Co-Based Full-Heusler Co2MnSi Alloy: Microstructure, Thermoelectric, and Magnetic Properties
- Original Research Article
Maria Busurina, Andrei Karpov, Yurii Morozov, Pavel Lazarev, Olga Boyarchenko, Alexander Sytschev
Study on the Tensile Creep Behaviors of Magnesium with Different Neodymium Contents and Grain Size Distributions
- Original Research Article
Qianbei Jing, Chun Xi, Zhirou Zhang, Sijia Hu, Mingao Li, Taku Sakai, Xuyue Yang, Qinghuan Huo
Significant Improvement of Mechanical Properties and Damping Capacity via Cold Rolling Pre-deformation in Fe−17Mn Damping Alloy
- Original Research Article
Shuai Wang, Yang Feng, Junjun Cui, Yang Zhao, Liqing Chen
Effect of Recrystallized Microstructure on Stress Rupture Behavior and Notch Sensitivity of Powder Bed Fusion-Laser Beam Manufactured Alloy 718
- Original Research Article
Y. Hashimoto, M. Neikter, P. Harlin, H. Brodin, Y. Miyashita
Effect of Laser Surface Treatment on the Distribution of Beta Phase and Intermetallic Particles and the Surface Integrity of AA5456 Alloy
- Open Access
- Original Research Article
Mohammed A. Shabana, Rajaguru Jeyamohan, Minh H. Tran, Fanyue Kong, Zachary D. Harris, Oliver Steinbock, István Z. Kiss, John R. Scully, Ji Ma, James T. Burns
Experimental Investigation and Thermodynamic Optimization of the Al–Hf–Ta System
- Original Research Article
Feikuo Chen, Zeting Du, Ya Liu, Cuiping Guo
Interfacial Bonding Mechanism of Al–Fe Dissimilar AFSD Cladding Components
- Open Access
- Original Research Article
Qi Wen, Long Wan, Zeyu Zhang
Microstructure Engineering During Wire-Arc Additive Manufacturing of High-Strength Martensitic Steels
- Open Access
- Original Research Article
M. Taylor, J. Wang, Y. H. Mozumder, S. W. Williams, F. Scenini, P. B. Prangnell, E. J. Pickering
Mechanical Behavior and Microstructure Evolution of Austenitic 301 Stainless Steel Under Different Strain Rates
- Original Research Article
YaBo Liu, DongXu Fan, Cong Liu, ZeXing Wang, ManFu Wang
Synchronized Enhancement of Electrical Conductivity and Mechanical Properties of A356 Alloy via Gd Alloying
- Original Research Article
Ying Han, Zhanyu Ma, Cuicui Yang, Yigeng Ding, Pengbin Lu, Bin Tan, Qiaoling Zheng, Zhiwei Liu
A Multiaxial Creep Life Model and Validation Based on the Skeletal Point Stress Method
- Original Research Article
Xuming Niu, Weicheng Zeng, Chenchen Wang, Zhigang Sun, Yingdong Song
Effects of Albumin Contents on Corrosion Behavior of High-Purity Mg in Artificial Saliva
- Original Research Article
Qingyun Fu, Shouzhen Cao, Weihong Jin, Shulan Xu, Zhentao Yu
Directly Predicting Hot Ductility of Steels Using Machine Learning Approaches
- Original Research Article
Letian Xu, Yaowen Xu, Gengwei Yang
Study on the Formation Mechanism of Adiabatic Shear Bands in Fine-Grained AZ31 Magnesium Alloy Based on the VPSC-DRX Model
- Original Research Article
Tianyu Cui, Yue Zhang, Xuanyu Liu, Tuo Gai, Pingli Mao
Wetting Behavior and Intermetallic Compound Formation Between the Polycrystalline Ni and Liquid Sn Interface: A Molecular Dynamics and Experimental Studies
- Open Access
- Original Research Article
Arkadiusz Żydek, Aleksandra Dybeł, Agnieszka Bigos, Monika Bugajska, Janusz Pstruś, Anna Wierzbicka-Miernik, Joanna Wojewoda-Budka, Marcela E. Trybula
Atomic-Scale Mechanisms of Annealing Induced Strengthening in FeNiCrCuAl High Entropy Alloy: A Molecular Dynamics Study
- Original Research Article
Peng-wei Wang, Ming-fei Li, Yi-jie Wang, Chuan-Nan Ge, Cheng-Long Lei, Wei-Chong Choo
Assessing the Effects of Chemical Composition and Short-Range Ordering on the Tensile Deformation Behavior of Nanocrystalline High-Entropy Alloys Nb–Ta–Hf–Zr: A Combined Study on Molecular Dynamics and Monte Carlo Simulation
- Original Research Article
Rita I. Babicheva, Ajay Kumar, Raj Kiran, Sergey V. Dmitriev, Artem A. Izosimov, Elena A. Korznikova
Effect of Substrate Roughness on the Tribological Performance of AlTiN/AlTiCrN-Coated A8 Tool Steel
- Original Research Article
Musa Muhammed, Mousa Javidani, Majid Heidari, Tom Levasseur, Mohammad Jahazi
Numerical Simulation of Residual Stress Evolution and Interfacial Cracking in Directed Laser Deposition of γ-TiAl Alloys
- Original Research Article
Zheng Zhou, Jianfeng Gu, Daming Tong
Effect of Multi-axial Forging on Microstructure and Functional Properties of Bioresorbable Fe–30Mn–5Si (Wt Pct) Alloy
- Original Research Article
Pulat Kadirov, Yulia Zhukova, Vadim Sheremetyev, Maria Antipina, Yulia Sadykova, Vladimir Cheverikin, Adrian Zavodov, Sergey Prokoshkin
Effect of Temper Rolling on Microstructure and Properties of Fe−3.0 Wt Pct Si Non-oriented Silicon Steel Ultra-Thin Ribbons Prepared with Planar Flow Casting
- Original Research Article
Jiaqi Chang, Siqian Bao, Chen Liu, Yuanyao Cheng, Qingming Chang, Jiarui Hu, Yin Zhao, Yuxin Liu
Correlative Differential Scanning Calorimetry and (Scanning) Transmission Electron Microscopy Study of the Influence of Interrupted Quenching and Natural Aging of a 6082 Alloy
- Open Access
- Original Research Article
Christoph M. Hell, Hannes Fröck, Ruben Bjørge, Benjamin Milkereit, Randi Holmestad
Microstructure and Mechanical Response of Steel/Ti Composites Processed by Severe Wire Drawing
- Open Access
- Original Research Article
Bartłomiej Pabich, Janusz Majta, Marcin Kwiecień, Kamil Cichocki, Remigiusz Błoniarz
Defect-Mediated Transition from Rate Insensitivity to Rate Sensitivity of Hexagonal Titanium at Cryogenic Temperature
- Original Research Article
Zhuangzhuang Liu, Yang Zhang, Yu Zhang, Danyang Li, Qiang Zhu, Peng Zhang, Hao Wu, Guohua Fan
A Novel Strategy to Tune Bainitic Transformation Behavior, Microstructure, and Mechanical Properties in Ultrafine Bainitic Steel
- Original Research Article
Hui Guo, Jianmin Su, Shaoguang Yang, Yipeng Lan
Effect of Mischmetal Treatment on the Microstructure, Tensile Properties, and Fracture Behavior of Hot Compressed Low-Carbon Aluminum-Killed (LCAK) Steel
- Original Research Article
Nachiketa Yadav, Gour Gopal Roy
Strength–Ductility Synergy and Corrosion Resistance in a Fe–2.8Mn–5.7Ni–0.3C Alloy via Dual-Step Heat Treatment
- Original Research Article
Yakai Bai, Depeng Shen, Yu Zhang, Bingtao Tang, Yelong An, Guoqiang Liu
Mechanical Properties and Energy Absorption Capabilities of Aluminum-Based Cellular Metamaterials with Triply Periodic Minimal Surfaces
- Original Research Article
Huicong Lei, Qing Zhu, Gaoqian Yuan, Yage Li, Mengjie Li, Zhong Huang, Haijun Zhang
Effects of Heat-Cryogenic Treatment on Properties and Microstructure of High-Alloy Powder Metallurgy High-Speed Steels
- Original Research Article
Longbin Wang, Chao Li, Yuanxin Wang
Deformation Behavior and Microstructure Evolution of 5052-O Aluminum Alloy Under Multiaxial Stress During Erichsen Cupping Test
- Original Research Article
Guanghui Zhao, Mingyang Liu, Juan Li, Huaying Li, Yugui Li, Yaohui Song
