Ausgabe 13/2013
Inhalt (29 Artikel)
Experimental Evidence of the Effect of Alloying Additions on the Stagnant Stage Length During Cyclic Partial Phase Transformations
Hao Chen, Roman Kuziak, Sybrand van der Zwaag
Influence of Secondary Cyclic Hardening on the Low Cycle Fatigue Behavior of Nitrogen Alloyed 316LN Stainless Steel
G. V. Prasad Reddy, R. Sandhya, M. D. Mathew, S. Sankaran
Experimental Investigation and Thermodynamic Modeling for the Mg-Nd-Sr System
Guanglong Xu, Yuwen Cui, Lijun Zeng, Xiaoma Tao, Libin Liu, Zhanpeng Jin
Effect of Heat Treatment on Morphology of Fe-Rich Intermetallics in Hypereutectic Al-Si-Cu-Ni Alloy with 1.26 pct Fe
Meng Sha, Shusen Wu, Li Wan, Shulin Lü
Development of Multiphase Microstructure with Bainite, Martensite, and Retained Austenite in a Co-Containing Steel Through Quenching and Partitioning (Q&P) Treatment
Santigopal Samanta, Sourav Das, Debalay Chakrabarti, Indradev Samajdar, Shiv Brat Singh, Arunansu Haldar
In Situ Neutron Diffraction Measurements During Annealing of Deformed Beryllium With Differing Initial Textures
Donald W. Brown, B. Clausen, T. A. Sisneros, L. Balogh, I. J. Beyerlein
Modeling of Microindentation with Consideration of the Surface Roughness
Hun Guan Chuah, Zaidi Mohd Ripin
A Highly Fatigue-Resistant Zr-Based Bulk Metallic Glass
Steven E. Naleway, Rawley B. Greene, Bernd Gludovatz, Neil K. N. Dave, Robert O. Ritchie, Jamie J. Kruzic
Microstructure and Origin of Hot-Work Tool Steel Fracture Toughness Deviation
Bojan Podgornik, Vojteh Leskovšek
Study of Rust Effect on the Corrosion Behavior of Reinforcement Steel Using Impedance Spectroscopy
Hakim Bensabra, Noureddine Azzouz
Influence of CO2-Ar Mixtures as Shielding Gas on Laser Welding of Al-Mg Alloys
Zouhair Boukha, José María Sánchez-Amaya, Leandro González-Rovira, Eloy Del Rio, Ginesa Blanco, Javier Botana
Partial Transient Liquid-Phase Bonding, Part II: A Filtering Routine for Determining All Possible Interlayer Combinations
Grant O. Cook III, Carl D. Sorensen
The Effectiveness of Surface Coatings on Preventing Interfacial Reaction During Ultrasonic Welding of Aluminum to Magnesium
Alexandria Panteli, Joseph D. Robson, Ying-Chun Chen, Philip B. Prangnell
Effect of Mn Substitution on Microstructure Evolution and Magnetic Phase Transition in La(Fe1−x Mn x )10.8Co0.7Si1.5 Compounds
Song Sun, Rongchang Ye, Huaifeng Li, Yanpo Zhang, Yuanhang Jia, Yunfei Wu, Yi Long
Equiaxed Grain Count in Aluminum Alloy Castings: Theoretical Background and Experimental Verification
Edward Fraś, K. Wiencek, M. Górny, Hugo F. López, E. Olejnik
Influence of Phosphorus on the Nucleation of Eutectic Silicon in Al-Si Alloys
Thomas Hartmut Ludwig, Paul Louis Schaffer, Lars Arnberg
Distortion Analysis in the Manufacturing of Cold-Drawn and Induction-Hardened Components
Thomas Georg Karl Hirsch, Alexandre da Silva Rocha, Rafael Menezes Nunes
Microstructure and Wear Behavior of Solidification Sonoprocessed B390 Hypereutectic Al-Si Alloy
Waleed Khalifa, Shimaa El-Hadad, Yoshiki Tsunekawa
Selective Leaching Process for Neodymium Recovery from Scrap Nd-Fe-B Magnet
Ching-Hwa Lee, Yu-Jung Chen, Ching-Hua Liao, Srinivasa R. Popuri, Shang-Lin Tsai, Chi-En Hung
Constitutive Modeling of Hot Deformation Behavior of the AA6063 Alloy with Different Precipitates
Nozar Anjabin, Ali Karimi Taheri, Hyoung Seop Kim
Modeling Grain Boundary Motion and Dynamic Recrystallization in Pure Metals
Julien Favre, Damien Fabrègue, David Piot, Ning Tang, Yuichiro Koizumi, Eric Maire, Akihiko Chiba
The Effect of Chemical Composition and Heat Treatment Conditions on Stacking Fault Energy for Fe-Cr-Ni Austenitic Stainless Steel
Toshio Yonezawa, Ken Suzuki, Suguru Ooki, Atsushi Hashimoto
Magnetic Evaluation of Microstructure Changes in 9Cr-1Mo and 2.25Cr-1Mo Steels Using Electromagnetic Sensors
Jun Liu, Martin Strangwood, Claire L. Davis, Anthony J. Peyton