Ausgabe 13/2014
Inhalt (52 Artikel)
Analysis of the Plasticity-Enhancing Mechanisms in 12 pctMn Austeno-ferritic Steel by In Situ Neutron Diffraction
Sangwon Lee, Wanchuck Woo, Bruno C. De Cooman
The Role of Plasticity in the Transverse Lattice Strain Evolution of a Martensitic Steel
Dong-Feng Li, Brian J. Golden, Shu-Yan Zhang, Vadim Davydov, Peter Tiernan, Noel P. O’Dowd
Foreword
Lukasz Madej, Maciej Pietrzyk
Conventional and Multiscale Modeling of Microstructure Evolution During Laminar Cooling of DP Steel Strips
Maciej Pietrzyk, Jan Kusiak, Roman Kuziak, Łukasz Madej, Danuta Szeliga, Rafał Gołąb
Numerical Investigation of Influence of the Martensite Volume Fraction on DP Steels Fracture Behavior on the Basis of Digital Material Representation Model
Konrad Perzyński, Łukasz Madej, Jinfeng Wang, Roman Kuziak, Peter D. Hodgson
A Numerical Method for Microstructure Generation of a Binary Aluminum Alloy and Study of Its Mechanical Properties Using the Finite Element Method
Hamid Sharifi, Daniel Larouche
Foreword
Benjamin M. Morrow, Suveen N. Mathaudhu, Ellen K. Cerreta, J. Pablo Escobedo-Diaz, Dallas R. Trinkle
Influence of Temperature on the Dynamic Tensile Behavior of Zirconium
Juan P. Escobedo, Ellen K. Cerreta, Daniel T. Martinez, Carl P. Trujillo, Ricardo A. Lebensohn, George T. Gray III
Modeling Twin Clustering and Strain Localization in Hexagonal Close-Packed Metals
Gábor Timár, João Quinta da Fonseca
Observations of the Atomic Structure of Tensile and Compressive Twin Boundaries and Twin–Twin Interactions in Zirconium
Benjamin M. Morrow, Rodney J. McCabe, Ellen K. Cerreta, Carlos N. Tomé
First Order Pyramidal Slip of Screw Dislocations in Zirconium
Nermine Chaari, Emmanuel Clouet, David Rodney
Evaluation of Solute Clusters Associated with Bake-Hardening Response in Isothermal Aged Al-Mg-Si Alloys Using a Three-Dimensional Atom Probe
Yasuhiro Aruga, Masaya Kozuka, Yasuo Takaki, Tatsuo Sato
Microstructural Evolution of the Interface Between Pure Titanium and Low Melting Point Zr-Ti-Ni(Cu) Filler Metals
Dongmyoung Lee, Juhyun Sun, Donghan Kang, Seungyoung Shin, Juhwa Hong
Precipitate Rafting in a Polycrystalline Superalloy During Compression Creep
Arun Altincekic, Ercan Balikci
Crystallographic Reconstruction Study of the Effects of Finish Rolling Temperature on the Variant Selection During Bainite Transformation in C-Mn High-Strength Steels
Nicolas Bernier, Lieven Bracke, Loïc Malet, Stéphane Godet
In Situ Thermo-magnetic Investigation of the Austenitic Phase During Tempering of a 13Cr6Ni2Mo Supermartensitic Stainless Steel
A. Bojack, L. Zhao, P. F. Morris, J. Sietsma
On the Roles of Oxidation and Vaporization in Surface Micro-structural Instability during Solution Heat Treatment of Ni-base Superalloys
Neil D’Souza, Dean Welton, Geoff D. West, Ian M. Edmonds, Hang Wang
Characterization of Transformation Stasis in Low-Carbon Steels Microalloyed with B and Mo
Tadashi Furuhara, Kenji Tsuzumi, Goro Miyamoto, Takafumi Amino, Genichi Shigesato
The Impact of Strain Reversal on Microstructure Evolution and Orientation Relationships in Ti-6Al-4V with an Initial Alpha Colony Microstructure
K. Muszka, M. Lopez-Pedrosa, K. Raszka, M. Thomas, W. M. Rainforth, B. P. Wynne
Local and Global Stress–Strain Behaviors of Transformation-Induced Plasticity Steel Using the Combined Nanoindentation and Finite Element Analysis Method
Hyeok Jae Jeong, Nam Suk Lim, Bong Ho Lee, Chan Gyung Park, Sunghak Lee, Seong-Hoon Kang, Ho Won Lee, Hyoung Seop Kim
The Effect of Long-Term Thermal Exposure on the Microstructure and Stress Rupture Property of a Directionally Solidified Ni-Based Superalloy
X. W. Jiang, D. Wang, G. Xie, H. Li, L. H. Lou, J. Zhang
Recrystallization Behavior of a Heavily Deformed Austenitic Stainless Steel During Iterative Type Annealing
B. Ravi Kumar, Sailaja Sharma
Annealing Temperature Dependence of the Tensile Behavior of 10 pct Mn Multi-phase TWIP-TRIP Steel
Sangwon Lee, Bruno C. De Cooman
Analysis of the Deformation Behavior in Tension and Tension-Creep of Ti-3Al-2.5V (wt pct) at 296 K and 728 K (23 °C and 455 °C) Using In Situ SEM Experiments
Hongmei Li, Carl J. Boehlert, Thomas R. Bieler, Martin A. Crimp
A Comparative Study on Dwell Fatigue of Ti-6Al-2Sn-4Zr-xMo (x = 2 to 6) Alloys on a Microstructure-Normalized Basis
Jianke Qiu, Yingjie Ma, Jiafeng Lei, Yuyin Liu, Aijun Huang, David Rugg, Rui Yang
Influence of Subsurface Structure on the Linear Reciprocating Sliding Wear Behavior of Steels with Different Microstructures
S. Sharma, S. Sangal, K. Mondal
Stress Corrosion Cracking Behavior at Inconel and Low Alloy Steel Weld Interfaces
Yo Tomota, Shin Daikuhara, Shun Nagayama, Masanori Sugawara, Norihiko Ozawa, Yoshitaka Adachi, Stefanus Harjo, Shigeo Hattori
Energy and Force Analysis of Ti-6Al-4V Linear Friction Welds for Computational Modeling Input and Validation Data
Anthony R. McAndrew, Paul A. Colegrove, Adrian C. Addison, Bertrand C. D. Flipo, Michael J. Russell
Relationship Between Microstructure, Strength, and Fracture in an Al-Zn-Mg Electron Beam Weld: Part I: Microstructure Characterization
Quentin Puydt, Sylvain Flouriot, Sylvain Ringeval, Frédéric De Geuser, Guillaume Parry, Alexis Deschamps
Relationship Between Microstructure, Strength, and Fracture in an Al-Zn-Mg Electron Beam Weld: Part II: Mechanical Characterization and Modeling
Quentin Puydt, Sylvain Flouriot, Sylvain Ringeval, Frédéric De Geuser, Rafael Estevez, Guillaume Parry, Alexis Deschamps
Mechanism of Secondary Hardening in Rapid Tempering of Dual-Phase Steel
Dulal Chandra Saha, Sashank S. Nayak, Elliot Biro, Adrian P. Gerlich, Y. Zhou
Effects of Thermal History and Microstructure on Segregation of Phosphorus and Alloying Elements in the Heat-Affected Zone of a Low Alloy Steel
Ziqing Zhai, Yuichi Miyahara, Hiroshi Abe, Yutaka Watanabe
Pore Formation Upon Nitriding Iron and Iron-Based Alloys: The Role of Alloying Elements and Grain Boundaries
B. Schwarz, H. Göhring, S. R. Meka, R. E. Schacherl, E. J. Mittemeijer
Relationship Between the Trace Elements and Graphite Growth Morphologies in Cast Iron
Haji Muhammad Muhmond, Hasse Fredriksson
A Study of the Development of Chemical Heterogeneity in Large Forging Ingots: Depending Upon the Configuration and Thermophysical Conditions of Casting
Nikolai Zyuban, Dmitrii Rutskii, Sergei Konovalov, Sergei Gamanyuk
Superplastic Forming of Multipass Friction Stir Processed Aluminum-Magnesium Alloy
S. Pradeep, Vivek Pancholi
Microtexture Development of Niobium in a Multilayered Ti/Al/Nb Composite Produced by Accumulative Roll Bonding
Peng Qu, Liming Zhou, Hui Xu, Viola L. Acoff
The Effect of Forging Variables on the Supersolvus Heat-Treatment Response of Powder-Metallurgy Nickel-Base Superalloys
S. L. Semiatin, J. M. Shank, A. R. Shiveley, W. M. Saurber, E. F. Gaussa, A. L. Pilchak
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
Amanda S. Wu, Donald W. Brown, Mukul Kumar, Gilbert F. Gallegos, Wayne E. King
Mechanical and Thermal Properties of Hot-Pressed ZrB2-SiC Composites
Shirshendu Chakraborty, Debashish Debnath, Azizur Rahaman Mallick, Probal Kumar Das
XPS Analysis of Ti6Al4V Oxidation Under UHV Conditions
M. Hierro-Oliva, A. M. Gallardo-Moreno, M. L. González-Martín
Determining the Mechanism of In-Service Cylinder Distortion in Aluminum Engine Blocks with Cast-In Gray Iron Liners
Anthony Lombardi, Comondore Ravindran, Dimitry Sediako, Robert MacKay
Texture Evolution and Twinning During the Expansion of Hot Extruded AZ31 + Sr Seamless Tubes
Alireza Sadeghi, Étienne Martin, Mihriban Pekguleryuz
Effect of Nitrogen Content on Grain Refinement and Mechanical Properties of a Reversion-Treated Ni-Free 18Cr-12Mn Austenitic Stainless Steel
P. Behjati, A. Kermanpur, A. Najafizadeh, H. Samaei Baghbadorani, L. P. Karjalainen, J. -G. Jung, Y. -K. Lee
Microstructure and Strengthening Mechanisms in an Ultrafine Grained Al-Mg-Sc Alloy Produced by Powder Metallurgy
Tammy J. Harrell, Troy D. Topping, Haiming Wen, Tao Hu, Julie M. Schoenung, Enrique J. Lavernia
Nanostructure and Mechanical Properties of Bulk Al86Ni6Y6Ce2 Alloy Produced by Hot Consolidation of Amorphous Melt-Spun Flakes
M. Salehi, S. G. Shabestari, S. M. A. Boutorabi
Crystal Plasticity Finite Element Method Simulations for a Polycrystalline Ni Micro-Specimen Deformed in Tension
Yoon Suk Choi, Michael A. Groeber, Paul A. Shade, Todd J. Turner, Jay C. Schuren, Dennis M. Dimiduk, Michael D. Uchic, Anthony D. Rollett
Modification of Grange–Kiefer Approach for Determination of Hardenability in Eutectoid Steel
Neethi Sushanthi, Joydeep Maity