Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 2/2020

Ausgabe 2/2020

Inhaltsverzeichnis ( 45 Artikel )

06.12.2019 | 5th World Congress on Integrated Computational Materials Engineering | Ausgabe 2/2020

Recrystallization and Grain Growth Simulations for Multiple-Pass Rolling and Annealing of U-10Mo

William Frazier, Chao Wang, Zhijie Xu, Nicole Overman, Shenyang Hu, Vineet V. Joshi

27.11.2019 | Communication | Ausgabe 2/2020

Correlation Between Microstructural Architecture and Mechanical Behavior of Single-Walled Carbon Nanotube-Aluminum Composites

Yan Shi, Yang Lu, Zihong Ni, Lei Zhao, Zhiqiang Li, Ding-Bang Xiong, Jin Zou, Qiang Guo

01.12.2019 | Communication | Ausgabe 2/2020

In-Situ Fabrication of Titanium Iron Intermetallic Compound by the Wire Arc Additive Manufacturing Process

G. K. Sujan, Bintao Wu, Zengxi Pan, Huijun Li

26.11.2019 | Communication | Ausgabe 2/2020

Microstructural Investigation of the Impact Weld Interface of Pseudo Single Grained Cu and Ag

Taeseon Lee, Menglin Zhu, Taylor Dittrich, Jinwoo Hwang, Anupam Vivek, Glenn S. Daehn

01.12.2019 | Communication | Ausgabe 2/2020

In-Situ Study on Texture-Dependent Martensitic Transformation and Cyclic Irreversibility of Superelastic NiTi Shape Memory Alloy

Jianguang Shuai, Yao Xiao

09.12.2019 | Communication | Ausgabe 2/2020

Deformation-Induced Carbide Transformation in M2 High-Speed Steel

Xuefeng Zhou, Zhixia Zheng, Weichao Zhang, Feng Fang, Yiyou Tu, Jianqing Jiang

11.11.2019 | Ausgabe 2/2020 Open Access

Evolution of Lattice Spacing of Gamma Double Prime Precipitates During Aging of Polycrystalline Ni-Base Superalloys: An In Situ Investigation

R. Y. Zhang, H. L. Qin, Z. N. Bi, J. Li, S. Paul, T. L. Lee, S. Y. Zhang, J. Zhang, H. B. Dong

14.11.2019 | Ausgabe 2/2020

Formation of Alpha-Case Layer During Investment Casting of Pure Ti and Ti-6Al-4V Using Comparative XRD and EXAFS Investigation

Thanachai Boonchuduang, Atipong Bootchanont, Wantana Klysubun, Penphitcha Amonpattaratkit, Atchara Khamkongkaeo, Chedtha Puncreobutr, Rattikorn Yimnirun, Boonrat Lohwongwatana

20.11.2019 | Ausgabe 2/2020

Effects of Stress on Martensite Transformation During Continuous Cooling and Mechanical Response of a Medium-Carbon High-Strength Steel

Man Liu, Guang Xu, Guanghui Chen, Juan Jia, Zhenye Chen, Ziliu Xiong

22.11.2019 | Ausgabe 2/2020

Low-Temperature Nitridation of 2205 Duplex Stainless Steel

J. C. Dalton, F. Ernst, A. H. Heuer

06.12.2019 | Ausgabe 2/2020

Simulation of Austenite Formation During Continuous Heating from Low Carbon Martensite with Poly-dispersed Cementite

M. Enomoto, K. Hayashi

04.12.2019 | Ausgabe 2/2020

Ferrite Growth During Cooling Through the Ferrite-Austenite-Graphite Field in SGI

Laura Noel García, Fernando Diego Carazo, Roberto Enrique Boeri

15.11.2019 | Ausgabe 2/2020

Design and Characterization of a Heat-Resistant Ferritic Steel Strengthened by MX Precipitates

Yao Du, Xiaolin Li, Xu Zhang, Yip-Wah Chung, Dieter Isheim, Semyon Vaynman

18.11.2019 | Ausgabe 2/2020

Mechanical Behavior and Deformation Kinetics of Aluminum Alloys Processed through Cryorolling and Subsequent Annealing

Kandarp Changela, Hariharan Krishnaswamy, Ravi Kumar Digavalli

13.11.2019 | Ausgabe 2/2020

Stress Localization Resulting from Grain Boundary Dislocation Interactions in Relaxed and Defective Grain Boundaries

Bryan Kuhr, Diana Farkas, Ian M. Robertson, Drew Johnson, Gary Was

21.11.2019 | Ausgabe 2/2020

Research on the Establishment and Collapse of Oxidation-Induced Wear of Steels Under Various Sliding Speeds

Benguo Zhang, Wei Jiang, Shouxing Zhu, Xiyan Liu, Shuqi Wang

11.11.2019 | Ausgabe 2/2020 Open Access

Testing Model Structure Through a Unification of Some Modern Parametric Models of Creep: An Application to 316H Stainless Steel

M. Evans

26.11.2019 | Ausgabe 2/2020

Processing and Characterization of Extremely Hard and Strong Cu-(0-15 wt pct)Al Alloys

Mahammad Ali Shaik, Brahma Raju Golla, Suresh Babu Pitchuka

02.12.2019 | Ausgabe 2/2020

Effects of Dynamic Strain Aging on Strain Hardening Behavior, Dislocation Substructure, and Fracture Morphology in a Ferritic Stainless Steel

G. C. Soares, R. R. U. Queiroz, L. A. Santos

11.12.2019 | Ausgabe 2/2020

On the Microstructure of Off-Eutectic Au-Ge Joints: A High-Temperature Joint

Andreas Larsson, Knut E. Aamundtveit

11.11.2019 | Ausgabe 2/2020 Open Access

The Effect of Interface Morphology on the Electro-Mechanical Properties of Ti/Cu Clad Composites Produced by Explosive Welding

Henryk Paul, Wojciech Skuza, Robert Chulist, Magdalena Miszczyk, Aleksander Gałka, Mariusz Prażmowski, Janusz Pstruś

21.11.2019 | Ausgabe 2/2020

In Situ Observation and Phase-Field Modeling of Peritectic Solidification of Low-Carbon Steel

Sen Luo, Guangguang Liu, Peng Wang, Xiaohua Wang, Weiling Wang, Miaoyong Zhu

04.12.2019 | Ausgabe 2/2020

Elemental Effects on Weld Cracking Susceptibility in AlxCoCrCuyFeNi High-Entropy Alloy

Alexander C. Martin, João Pedro Oliveira, Carolin Fink

09.12.2019 | Ausgabe 2/2020 Open Access

Prenucleation at the Interface Between MgO and Liquid Magnesium: An Ab Initio Molecular Dynamics Study

C. M. Fang, Z. Fan

26.11.2019 | Ausgabe 2/2020

Stable Eutectic Formation in Spray-Formed Cast Iron

Guilherme Zepon, Julia F. M. Fernandes, Lucas B. Otani, Claudemiro Bolfarini

12.12.2019 | Ausgabe 2/2020

Kinetic Constraints of δ-Ferrite to the Formation of Kappa (κ) Carbide in a Fe-4Mn-9Al-0.3C Wt Pct Low-Density Steel

Mrinmoy Sinha, Syed Ahad, Atul K. Chaudhry, Sadhan Ghosh

09.12.2019 | Ausgabe 2/2020 Open Access

Structure Modification upon Ultrasonic Processing of an AA4032 Piston Alloy: Comparison of Permanent Mold and Direct-Chill Casting

Suwaree Chankitmunkong, Dmitry G. Eskin, Chaowalit Limmaneevichitr

22.11.2019 | Ausgabe 2/2020

A Novel Rolling Approach to Refining the Microstructure and Enhancing the Mechanical Strength of Pure Aluminium

Marta Orłowska, Krzysztof Topolski, Małgorzata Lewandowska

04.12.2019 | Ausgabe 2/2020 Open Access

Microstructure Evolution During Hot Deformation of REX734 Austenitic Stainless Steel

Mykola Kulakov, Jianglin Huang, Michail Ntovas, Shanmukha Moturu

01.12.2019 | Ausgabe 2/2020

Mn3O4 and (ZnFe)OOH Composites for Supercapacitors with High Active Mass

R. Poon, W. Liang, I. Zhitomirsky

01.12.2019 | Ausgabe 2/2020

Growth and Properties of TiN/Al2O3/Ti(C, N)/TiN Multilayer CVD Coatings on Ti (C, N)-Based Cermet Substrates with Ni, Co and Fe Binders

Junbo Liu, Ji Xiong, Zhixing Guo, Chengtao Qin, Ya Xiao, Qianbing You

11.11.2019 | Ausgabe 2/2020

First-Principles Investigation of Thermodynamic Decomposition of Interfacial Oxides in Hot Compression Bonding

Honglin Zhang, Xing-Qiu Chen, Bin Xu, Mingyue Sun, Dianzhong Li

21.11.2019 | Ausgabe 2/2020

Macro–Micro Scale Modeling and Simulation of Columnar Grain Evolution During Gas Tungsten Arc Welding of Nickel-Based Alloy GH3039

Lili Chen, Yanhong Wei, Shufan Qiu, Wenyong Zhao

04.12.2019 | Ausgabe 2/2020

A Promising Horizon in Mechanical and Corrosion Properties Improvement of Ni-Mo Coatings Through Incorporation of Y2O3 Nanoparticles

Mehdad Fathi, Mir Saman Safavi, Sahand Mirzazadeh, Alireza Ansariyan, Iraj Ahadzadeh

09.12.2019 | Ausgabe 2/2020

Mussel-Inspired Superhydrophobic Surfaces on 316L Stainless Steel with Enhanced Corrosion Resistance

Yuanyuan Miao, Dalei Zhang, Ning Cao, Liuyang Yang, Hong Ju, Rabah Boukherroub, Xueqiang Lin, Huiping Li, Youhai Jin

06.12.2019 | Ausgabe 2/2020

High Temperature Oxidation of Slurry Aluminized Deformable Austempered Ductile Iron (DADI)

Olga Tsurtsumia, Fernando Pedraza, Benjamin Gregoire, Nugzar Khidasheli, Elguja Kutelia

06.12.2019 | Ausgabe 2/2020

Properties and High Temperature Dry Sliding Wear Behavior of Boronized Inconel 718

Ali Günen

01.12.2019 | Ausgabe 2/2020

A Data-Driven Scheme for Quantitative Analysis of Texture

Yafei Wang, Chenfan Yu, Leilei Xing, Kailun Li, Jinhan Chen, Wei Liu, Jing Ma, Zhijian Shen

11.11.2019 | Ausgabe 2/2020

Study of Residual Stresses in Additively Manufactured Ti-6Al-4V by Neutron Diffraction Measurements

David Gloaguen, Baptiste Girault, Bruno Courant, Pierre-Antoine Dubos, Marie-José Moya, François Edy, Joana Rebelo Kornmeier

04.12.2019 | Ausgabe 2/2020 Open Access

On the Dwell-Fatigue Crack Propagation Behavior of a High-Strength Ni-Base Superalloy Manufactured by Selective Laser Melting

Dunyong Deng, Robert Eriksson, Ru Lin Peng, Johan Moverare

01.12.2019 | Ausgabe 2/2020

Characterization of Recrystallization and Second-Phase Particles in Solution-Treated Additively Manufactured Alloy 718

Achmad Ariaseta, Satoru Kobayashi, Masao Takeyama, Yuting Wang, Shinya Imano

04.12.2019 | Ausgabe 2/2020

Formation of Austenite in Additively Manufactured and Post-Processed Duplex Stainless Steel Alloys

A. D. Iams, J. S. Keist, T. A. Palmer

21.11.2019 | Ausgabe 2/2020

Effects of Er and Zr Additions on the As-Cast Microstructure and on the Solution-Heat-Treatment Response of Innovative Al-Si-Mg-Based Alloys

M. Colombo, R. H. Buzolin, E. Gariboldi, L. Rovatti, R. Vallant, C. Sommitsch

06.12.2019 | Ausgabe 2/2020

The Influence of Microstrain Evolution by Tensile Straining on Localized Corrosion of Al-Li Alloys 2099 and 2196

E. E. Wright, M. J. Kaufman, G. R. Weber

06.12.2019 | Correction | Ausgabe 2/2020

Correction to: The Observation of the Structure of M23C6/γ Coherent Interface in the 100Mn13 High Carbon High Manganese Steel

Zhenfeng Xu, Zhimin Ding, Bo Liang

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise