Ausgabe 3/2001
Inhalt (41 Artikel)
Influence of magnetic field on the kinetics of proeutectoid ferrite transformation in iron alloys
M. Enomoto, H. Guo, Y. Tazuke, Y. R. Abe, M. Shimotomai
The dependence of normal and abnormal grain growth in silver on annealing temperature and atmosphere
Jae Bon Koo, Duk Yong Yoon
Deformation of NiTiCu shape memory single crystals in compression
Huseyin Sehitoglu, Ibrahim Karaman, X. Zhang, Hong Kim, Yuriy Chumlyakov, I. Kireeva, Hans J. Maier
Mixed-mode, high-cycle fatigue-crack-growth thresholds in Ti-6Al-4V: Role of bimodal and lamellar microstructures
J. P. Campbell, R. O. Ritchie
Effects of heat treatment and alloying elements on the microstructures and mechanical properties of 0.15 wt pct C transformation-induced plasticity-aided cold-rolled steel sheets
Sung-Joon Kim, Chang Gjl Lee, Ildong Choi, Sunghak Lee
Correlation of microstructure with the wear resistance and fracture toughness of duocast materials composed of high-chromium white cast iron and low-chromium steel
Hongsug Oh, Sunghak Lee, Jaeyoung Jung, Sangho Ahn
An investigation of the fracture behavior of coarse-grained heat-affected zones in A707 steel welds
W. O. Soboyejo, J. Zhou, J. Crompton, T. McGaughy, F. Orth
Microstructural evolution in the superplastic-like deformation of Al-Al3Ni eutectic alloy with [111] fiber texture
J. Y. Uan, T. S. Lui, L. H. Chen
Environment-sensitive fracture of iron aluminides under monotonic tensile loading
Gilbert Hénaff, Anne Tonneau
Effect of CO2 laser welding on the shape-memory and corrosion characteristics of TiNi alloys
Y. T. Hsu, Y. R. Wang, S. K. Wu, C. Chen
Effects of annealing on the microstructure and giant magnetoresistance of Co-Cu-based spin valves
M. A. Mangan, G. Spanos, R. D. McMichael, P. J. Chen, W. F. Egelhoff Jr.
Continuously cast Cu-Al-Ni shape memory wires with a unidirectional morphology
G. Motoyasu, M. Kaneko, H. Soda, A. McLean
Numerical modeling for peritectic solidification of RE123 high T c oxide superconductors
Masaki Sumida, Takateru Umeda
Role of solid-state skeletal sintering during processing of Mo-Cu composites
John L. Johnson, Randall M. German
Morphological evolution during the early stages of aluminide coating growth on a single-crystal nickel superalloy surface
G. Y. Kim, W. Y. Lee, J. A. Haynes, T. R. Watkins
The influence of Al3Zr dispersoids on the recrystallization of hot-deformed AA 7010 alloys
Bruce Morere, Ravi Shahani, Claire Maurice, Julian Driver
Modeling of structural and compositional homogenization of plutonium-1 weight percent gallium alloys
Jeremy N. Mitchell, Thomas G. Zocco, Ramiro A. Pereyra, Frank E. Gibbs
Modeling of kinetics of austenite-to-allotriomorphic ferrite transformation in 0.37C-1.45Mn-0.11V microalloyed steel
C. Capdevila, F. G. Caballero, C. García de Andrés
Lattice plane response during tensile loading of an aluminum 2 percent magnesium alloy
B. Clausen, M. A. M. Bourke
The effect of twinning and slip on the bauschinger effect of hadfield steel single crystals
Ibrahim Karaman, Huseyin Sehitoglu, Y. I. Chumlyakov, I. V. Kireeva, Hans J. Maier
An evaluation of the flow behavior during high strain rate superplasticity in an Al-Mg-Sc alloy
Shogo Komura, Zenji Horita, Minoru Furukawa, Minoru Nemoto, Terence G. Langdon
Plastic straining effects on the microstructure of a Ti-rich NiTi shape memory alloy
H. F. Lopez, A. Salinas, H. Calderón
Fatigue-crack growth behavior in the superelastic and shape-memory alloy nitinol
A. L. McKelvey, R. O. Ritchie
Microstructures of hot-rolled high-strength steels with significant differences in edge formability
R. D. K. Misra, S. W. Thompson, T. A. Hylton, A. J. Boucek
Nanoindentation as a strength probe—a study on the hardness dependence of indent size for fine-grained and coarse-grained ferritic steel
Kensuke Miyahara, Saburo Matsuoka, Tohru Hayashi
Texture, strain, and phase-fraction measurements during mechanical cycling in superelastic NiTi
R. Vaidyanathan, M. A. M. Bourke, D. C. Dunand
Effect of Sb on the microstructure and mechanical properties of AZ91 magnesium alloy
Qudong Wang, Yanping Zhu, Wenzhou Chen, Wenjiang Ding, M. Mabuchi
Creep crack growth in the absence of grain boundary precipitates in UDIMET 520
S. Xu, A. K. Koul, J. I. Dickson
Effects of Si and Ni powder refining on the formation mechanism of nickel silicides induced by mechanical alloying
W. H. Lee, C. S. Byun, S. H. Lee, D. K. Kim
Mechanical milling of gas-atomized Al-Ni-Mm (Mm = misch metal) alloy powders
Soon-Jik Hong, Taek-Soo Kim, Byong Sun Chun, C. Suryanarayana
Modeling of spray-formed plates using an X-Y moving substrate
Y.J Lin, E. J. Lavernia, J. E. Bobrow, W. Feng
Preparation of Ti-Al intermetallic compounds by spark plasma sintering
Bingchu Mei, Y. Miyamoto