Ausgabe 3/2008
Inhalt (23 Artikel)
Phase Equilibria of Sn-Co-Ni System and Interfacial Reactions in Sn/(Co, Ni) Couples
Yi-Hsiang Chao, Sinn-Wen Chen, Chih-Hong Chang, Chih-Chi Chen
Influence of Tin Addition on the Microstructure and Mechanical Properties of Al-Si-Cu-Mg and Al-Si-Mg Casting Alloys
A.M.A. Mohamed, F.H. Samuel, A.M. Samuel, H.W. Doty, S. Valtierra
Modeling of Thermodynamic Properties and Phase Equilibria for the Al-Sm Binary System
S.H. Zhou, R.E. Napolitano
The Cementite Spheroidization Process in High-Carbon Steels with Different Chromium Contents
N.V. Luzginova, L. Zhao, J. Sietsma
A New Constitutive Model for the Finite Element Simulation of Local Hot Forming of Aluminum 6xxx Alloys
S. Gouttebroze, A. Mo, Ø. Grong, K.O. Pedersen, H.G. Fjær
Comparison of the Influence of Temperature on the High-Strain-Rate Mechanical Responses of PBX 9501 and EDC37
R.K. Govier, G.T. Gray III, W.R. Blumenthal
Fretting Wear Properties of TiCN-Ni Cermets: Influence of Load and Secondary Carbide Addition
B.V. Manoj Kumar, Bikramjit Basu
Trigger Stress for Stress-Induced Martensitic Transformation during Tensile Deformation in Ti-Al-Nb Alloys: Effect of Grain Size
Archana Paradkar, S.V. Kamat, A.K. Gogia, B.P. Kashyap
A Comparison of Mechanical Properties and Hydrogen Embrittlement Resistance of Austempered vs Quenched and Tempered 4340 Steel
John M. Tartaglia, Kristen A. Lazzari, Grace P. Hui, Kathy L. Hayrynen
Nonisothermal and Isothermal Oxidation Behavior of Nb-Si-Mo Alloys
K. Chattopadhyay, R. Mitra, K.K. Ray
Transmission Electron Microscopy and Nanoindentation Study of the Weld Zone Microstructure of Diode-Laser-Joined Automotive Transformation-Induced Plasticity Steel
J. Chen, K. Sand, M.S. Xia, C. Ophus, R. Mohammadi, M.L. Kuntz, Y. Zhou, D. Mitlin
Formation of Whiskers and Hillocks on the Surface of Sn-6.6RE Alloys
T.H. Chuang, C.C. Chi, H.J. Lin
X-Ray Radioscopic Visualization of the Solutal Convection during Solidification of a Ga-30 Wt Pct In Alloy
S. Boden, S. Eckert, B. Willers, G. Gerbeth
Microstructure Evolution of a Pearlitic Steel during Hot Deformation of Undercooled Austenite and Subsequent Annealing
Longfei Li, Wangyue Yang, Zuqing Sun
Effect of Chromium on Microstructure and Properties of High Boron White Cast Iron
Zhongli Liu, Xiang Chen, Yanxiang Li, Kaihua Hu
Effect of Stress and Strain Path on Cavity Closure during Hot Working of an Alpha/Beta Titanium Alloy
P.D. Nicolaou, R.L. Goetz, S.L. Semiatin
Effect of Hot Rolling on Bonding Characteristics and Impact Behavior of a Laminated Composite Material Based on UHCS-1.35 Pct C
M. Pozuelo, F. Carreño, C.M. Cepeda-Jiménez, O.A. Ruano
Evolution of Microstructure and Texture during Recrystallization of the Cold-Swaged Ti-Nb-Ta-Zr-O Alloy
W.Y. Guo, H. Xing, J. Sun, X.L. Li, J.S. Wu, R. Chen
Prediction of Elastic Modulus + Anisotropy Using X-Ray and Electron Backscattered Diffraction Texture Quantification and Ultrasonic (Electromagnetic Acoustic Transducer) Measurements in Aluminum Sheets
C.L. Davis, M. Strangwood, M. Potter, S. Dixon, P.F. Morris
Electron Backscatter Diffraction Mapping of Microstructural Evolution of Pure Magnesium during Creep
Takanori Sato, Milo V. Kral
Precipitation Strengthening of a Mg-Al-Ca–Based AXJ530 Die-cast Alloy
A. Suzuki, N.D. Saddock, J.R. TerBush, B.R. Powell, J.W. Jones, T.M. Pollock