Ausgabe 3/2009
Inhalt (23 Artikel)
Diffusion Kinetics of Oxygen in β-Titanium Measured by Molten Flux Method
Min Ho Song, Seung Min Han, Good Sun Choi, Dong Joon Min, Joo Hyun Park
Microstructure and Magnetic Properties in Fe61Co9−x Zr8Mo5W x B17 (0 ≤ x ≤ 3) Glasses and Glass-Matrix Composites
W.-M. Wang, W.X. Zhang, A. Gebert, S. Roth, C. Mickel, L. Schultz
Effect of V and N Precipitation on Acicular Ferrite Formation in Sulfur-Lean Vanadium Steels
C. Capdevila, C. García-Mateo, J. Chao, F.G. Caballero
Microstructural Evolution during Creep of Alloy 800HT in the Temperature Range 600 °C to 1000 °C
J. Erneman, J.-O. Nilsson, H.-O. Andrén, D. Tobjörk
Microstructural and Dilatational Changes during Tempering and Tempering Kinetics in Martensitic Medium-Carbon Steel
Minsu Jung, Seok-Jae Lee, Young-Kook Lee
Dissolution and Precipitation Kinetics of Nb(C,N) in Austenite of a Low-Carbon Nb-Microalloyed Steel
June-Soo Park, Yang-Soo Ha, Seok-Jae Lee, Young-Kook Lee
A Model for Converting Dilatometric Strain Measurements to the Fraction of Phase Formed during the Transformation of Austenite to Martensite in Powder Metallurgy Steels
Virendra S. Warke, Richard D. Sisson Jr., Makhlouf M. Makhlouf
Hot Ductility of Nb- and Ti-Bearing Microalloyed Steels and the Influence of Thermal History
K.R. Carpenter, R. Dippenaar, C.R. Killmore
Prediction of the Fatigue Life of Cast Steel Containing Shrinkage Porosity
Richard A. Hardin, Christoph Beckermann
Effect of Sc and Zn Additions on Microstructure and Hot Formability of Al-Mg Sheet Alloys
Hanliang Zhu, Arne K. Dahle, Amit K. Ghosh
Boride Formation Induced by pcBN Tool Wear in Friction-Stir-Welded Stainless Steels
Seung Hwan C. Park, Yutaka S. Sato, Hiroyuki Kokawa, Kazutaka Okamoto, Satoshi Hirano, Masahisa Inagaki
Theoretical Investigation of the Interfacial Reactions during Hot-Dip Galvanizing of Steel
G.K. Mandal, R. Balasubramaniam, S.P. Mehrotra
Grain Nucleation Parameters for Aluminum Alloys: Experimental Determination and Model Validation
M. Ahmadein, B. Pustal, R. Berger, E. Subašić, A. Bührig-Polaczek
Effect of Antimony and Cerium on the Formation of Chunky Graphite during Solidification of Heavy-Section Castings of Near-Eutectic Spheroidal Graphite Irons
P. Larrañaga, I. Asenjo, J. Sertucha, R. Suarez, I. Ferrer, J. Lacaze
A Comparison of Columnar-to-Equiaxed Transition Prediction Methods Using Simulation of the Growing Columnar Front
S. McFadden, D.J. Browne, Ch.-A. Gandin
Processing of Ultrafine-Size Particulate Metal Matrix Composites by Advanced Shear Technology
N.S. Barekar, S. Tzamtzis, N. Hari Babu, Z. Fan, B.K. Dhindaw
Relationship between Fracture Toughness and Tensile Properties of A357 Cast Aluminum Alloy
N.D. Alexopoulos, M. Tiryakioğlu
Evolution of Grain Boundary Phases during the Homogenization of AA7020 Aluminum Alloy
A.R. Eivani, H. Ahmed, J. Zhou, J. Duszczyk
Enhanced Mechanical Properties through Reversion in Metastable Austenitic Stainless Steels
M.C. Somani, P. Juntunen, L.P. Karjalainen, R.D.K. Misra, A. Kyröläinen