Zum Inhalt

Metallurgical and Materials Transactions A

Ausgabe 3/2025

Inhalt (25 Artikel)

On the Changes of Residual Stress States of S550MC + 100Cr6 Cladded Steel Upon Tensile Deformation

  • Open Access
  • Brief Communication

M. Krochmal, T. Wegener, J. Zeisberg, T. Niendorf

Hydrogen Effects on Hall–Petch Coefficient and Fracture Strength in Pure Ni and Ni-20Cr Alloy: A Macroscopic Insight of the Hydrogen Embrittlement Mechanism

  • Open Access
  • Brief Communication

Motomichi Koyama, Kota Tomatsu, Hiroshi Kakinuma, Saya Ajito, Eiji Akiyama

Enhanced Strength and Ductility of Chemically Heterogeneous Bainitic Steel Via Precipitation Strengthened Retained Austenite

  • Brief Communication

Yusong Fan, Guhui Gao, Zongyan Liu, Xuan Cheng, Dezhen Yang, Xiaolu Gui, Zhiping Xiong

Intrinsic High-Strain-Rate Softening in a High-Strength Quenching and Partitioning Steel

  • Open Access
  • Brief Communication

C. P. Huang, M. Wang, K. Y. Zhu, Astrid Perlade, M. X. Huang

An Orientation Relationship Between Parent Grains and Its Application to Variant Selection of Transformed α in Titanium Alloys

  • Original Research Article

Yuanhong Liu, Zibo Zhao, Qingjiang Wang, Jiuxu Yang, Yujing Liu, Jianrong Liu, Rui Yang

Microstructure and Strengthening Mechanisms in a Newly Designed High Strength Low-Density Duplex Steel

  • Original Research Article

R. Pavan Kumar, S. Pramanik, N. C. S. Srinivas, R. Manna

Effect of Al–Mg Filler Wires on Weldability of Cold Metal Transfer Welded AlSi10Mg Alloys Fabricated Using Laser Powder Bed Fusion

  • Original Research Article

Li Cui, Defan Wu, Lixia Ma, Jiutong Qiao, Xu Wu, Dingyong He

Experimental Investigation and Thermodynamic Description of the Co–Hf–Nb System

  • Original Research Article

Daomin Ye, Cuiping Guo, Changrong Li, Zhenmin Du

Stimulating β-Series Precipitation in Mg–Nd Alloys Via Microalloying: A Comparison of Electron Microscopy and Small-Angle Scattering Techniques

  • Original Research Article

Janet M. Meier, Jiashi Miao, Lisa DeBeer-Schmitt, Jan Ilavsky, Alan A. Luo

Effect of Temperature on Tensile Properties of Laser Powder Bed Fusion Additively Manufactured Niobium Alloy C103

  • Original Research Article

Eric Brizes, Justin Milner, Elizabeth Young-Dohe, Anita Garg, Ronald Noebe

Stabilization and Deformation Behaviour of In Situ Al3Zr/AA6061 Composite Aluminium Foams

  • Original Research Article

Merugu Rakesh, Asim Tewari, Shyamprasad Karagadde

Metallurgical Aspects of Joint Formation Between Diffusion Barriers and a Skutterudite Thermoelectric Material

  • Original Research Article

M. J. Kruszewski, K. Cymerman, J. Flaga, Ł. Ciupiński

Effect of Initial Microstructure on Twinning, Dynamic Recrystallization Behaviors, and Mechanical Properties of Pre-twinned AZ31 Mg Sheets

  • Original Research Article

Zhijian Li, Huihui Nie, Hongyang Zhang, Shaoxin Yang, Liuwei Zheng, Hongsheng Chen, Wei Liang

Effect of Nb-Ti Double Microalloys on the Microstructure Control and Mechanical Properties of FeCrAl As-Cast Alloys

  • Original Research Article

Xing Fan, Fei Wang, Hongming Wang, Bowen Zhao, Jun Zhou, Biyan Fan, Yongjie Dou, Runze Li

Dihedral Angle and Cracking During Solidification

  • Original Research Article

Sindo Kou

Metastable Microstructural States During Short-Term Heat Treatment of the High-Speed Steel PM HS 3-3-4: Modeling and Experimental Validation

  • Open Access
  • Original Research Article

Stefan Müller, Santiago Benito, Jannik Schuppener, Sebastian Weber

Research on the High-Temperature Deformation Mechanism and Welded Seam Constitutive Relationship for High-Strength Steel

  • Original Research Article

Song Gao, Qiuhan Cheng, Qihan Li, Yingli Sun, Zhaopeng Hao

Rapid Oxidation of Advanced High-Strength Steels at Elevated Temperatures—Kinetics and Characterization

  • Original Research Article

Ahad Shafiee, Faique Al Hussain, Sydney Okoroafor, Daniel Odoh, Elliot Biro

Fatigue Life Prediction of Electromagnetic-Strengthened Al-Alloy 2A12-T4 Holed Plates

  • Original Research Article

Xiaofei Xu, Lixia Ouyang, Huihui Geng, Changxing Li, Shaowei Ouyang

Simulation of Crystallographic Texture After High Temperature Axisymmetric Extrusion of Aluminum Alloys

  • Original Research Article

A. Khajezade, W. J. Poole, M. Greenwood, M. Militzer