Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 4/2020

Ausgabe 4/2020

Inhaltsverzeichnis ( 45 Artikel )

03.02.2020 | Institute of Metals Lecture/Robert Franklin Mehl Award | Ausgabe 4/2020 Open Access

Revisiting “Steady-State” Monotonic and Cyclic Deformation: Emphasizing the Quasi-Stationary State of Deformation

Haël Mughrabi

29.01.2020 | Communication | Ausgabe 4/2020

Effect of Cu and Li Contents on the Serrated Flow Behavior of Al-Cu-Li Based Alloys

Niraj Nayan, A. K. Mukhopadhyay, S. V. S. Narayana Murty, Manasij Yadava, Rajdeep Sarkar, M. J. N. V. Prasad, I. Samajdar

21.01.2020 | Communication | Ausgabe 4/2020

Enhanced Damping Capacity in Graphene-Al Nanolaminated Composite Pillars Under Compression Cyclic Loading

Anliang Lu, Lei Zhao, Yu Liu, Zhiqiang Li, Ding-Bang Xiong, Jin Zou, Qiang Guo

05.02.2020 | Communication | Ausgabe 4/2020

Microstructure, Element Distribution, and Mechanical Property of Cu9Ni6Sn Alloys by Conventional Casting and Twin-Roll Casting

Delin Tang, Lin Wang, Jing Li, Zhaofei Wang, Charlie Kong, Hailiang Yu

27.01.2020 | Communication | Ausgabe 4/2020

High Temperature Micromechanical Behavior of a Pt-Modified Nickel Aluminide Bond-Coating and of Its Interdiffusion Zone with the Superalloy Substrate

Damien Texier, Daniel Monceau, Serge Selezneff, Arnaud Longuet, Eric Andrieu

05.02.2020 | Communication | Ausgabe 4/2020

Breaking the Orientation Pinning Limit Using an External Field

Mengcheng Zhou, Xin Ba, Xinfang Zhang

10.02.2020 | Communication | Ausgabe 4/2020

Extra Strain Hardening in High Pressure Die Casting Mg-Al-RE Alloy

Jie Wei, Qudong Wang, Dongdi Yin, Li Zhang, Hao Zhou, Bing Ye, Haiyan Jiang, Wenjiang Ding

13.01.2020 | Ausgabe 4/2020

Phase and Microstructure Evolution of a Low-Alloyed Steel During Intercritical Annealing and Quenching

Michael Pfund, Moritz Wenk, Reiner Mönig

03.02.2020 | Ausgabe 4/2020

Isothermal Phase Transformations in a Low Carbon Steel During Single and Two-Step Partitioning

F. M. Castro Cerda, E. I. Hernández, T. Ros-Yanez, R. H. Petrov

04.02.2020 | Ausgabe 4/2020 Open Access

The Effect of Variant Selection on Texture of TWIP/TRIP Steels During Uniaxial Tensile Loading

Marton Benke, Adrienn Hlavacs, Erzsebet Nagy, Gabor Karacs, Valeria Mertinger

27.01.2020 | Ausgabe 4/2020

Dislocation-Evolution Based Comprehensive Phenomenological Model for Continuum-Scale Description of Stress–Strain and Work-Hardening Behavior

J. Mittra, N. T. Kumbhar

24.01.2020 | Ausgabe 4/2020

Microstructure–Property Relationship in Cold-Drawn Pearlitic Steel Wires

Nicolas Guelton, Marc François

21.01.2020 | Ausgabe 4/2020 Open Access

On the Precipitation-Strengthening Contribution of the Ta-Containing Co3(Al,W)-Phase to the Creep Properties of γ/γ′ Cobalt-Base Superalloys

A. Bezold, N. Volz, F. Xue, C. H. Zenk, S. Neumeier, M. Göken

21.01.2020 | Ausgabe 4/2020

Initiation and Early-Stage Growth of Internal Fatigue Cracking Under Very-High-Cycle Fatigue Regime at High Temperature

Z. Zhao, F. Zhang, C. Dong, X. Yang, B. Chen

03.02.2020 | Ausgabe 4/2020

Investigation on Tensile Properties of Austempered SAE52100 Steel

Yuming Pan, Bingxu Wang, Gary C. Barber

31.01.2020 | Ausgabe 4/2020

Strain-Induced Dissolution of Cementite in Cold-Drawn Pearlitic Steel Wires

Nicolas Guelton, Marc François

10.02.2020 | Ausgabe 4/2020

Reversion of Post-Shape Memory Effect Twins During Unloading of Uranium-6 wt pct Niobium

A. J. Clarke, D. W. Brown, B. Clausen, T. A. Sisneros, R. D. Field

03.02.2020 | Ausgabe 4/2020 Open Access

Size Effects of Hardness and Strain Rate Sensitivity in Amorphous Silicon Measured by Nanoindentation

Dariusz M. Jarząbek, Michał Milczarek, Szymon Nosewicz, Piotr Bazarnik, Helmut Schift

06.02.2020 | Ausgabe 4/2020

Creep Behaviors of Two Near-Eutectic Al-Si-Cu-Mn Heat-Resistant Alloys Containing Dendritic Mn-Rich Primary Phase or Modified Star-Like Cr-Mn-Rich Primary Phase

Soban Muddassir Dar, Hengcheng Liao, Baojun Zhao

13.01.2020 | Ausgabe 4/2020

Metallurgical, Fatigue and Pitting Corrosion Behavior of AISI 316 Joints Welded with Nb-Based Stabilized Steel Filler

Dikshant Malhotra, A. S. Shahi

30.01.2020 | Ausgabe 4/2020

Austenite Grain Size Prediction in the Coarse-Grained Heat-Affected Zone of the Developed Cu-Free High-Strength Low-Alloy Hull Structure Steel

Xuan-Wei Lei, Shuan-Bao Zhou, Ji-Hua Huang

04.02.2020 | Ausgabe 4/2020

Mechanism of Zn Coating on the Wettability, Spreadability, and Microstructure of Al/Steel with the Laser Welding–Brazing Method

Junhao Sun, Jian Huang, Fenggui Lu, Yanyan Zhu, Zhuguo Li

27.01.2020 | Ausgabe 4/2020

Atomic-Scale Investigation of the Borides Precipitated in a Transient Liquid Phase-Bonded Ni-Based Superalloy

X. B. Hu, N. C. Sheng, Y. M. Zhu, J. F. Nie, J. D. Liu, X. F. Sun, X. L. Ma

03.02.2020 | Ausgabe 4/2020

Role of the V-Notch Location in the Impact Toughness of 9 Pct Cr-CrMoV Dissimilar Welded Joints

Kai Ding, Bingge Zhao, Xin Huo, Manjie Fan, Xiaohong Li, Yuanheng Zhang, Tao Wei, Guanzhi Wu, Yulai Gao

31.01.2020 | Ausgabe 4/2020

Grain Refinement Mechanism of the δ-Ferrite in Steels Through Cerium Addition

Y. P. Ji, Y. M. Li, M. X. Zhang, W. Qu, T. X. Zhao, H. P. Ren

21.01.2020 | Ausgabe 4/2020

Continuous Grain Size Gradients in Austenitic Incoloy 800H: Design, Processing, and Characterization

Catherine M. Bishop, Shaun P. Mucalo, Milo V. Kral, Daniel J. Lewis

21.01.2020 | Ausgabe 4/2020

Understanding the Role of Multi-scale Reinforcements on Severe Plastic Deformation of Titanium Matrix Composites

Jianwen Le, Yuanfei Han, Juan Xiang, Liming Lei, Guangfa Huang, Weijie Lu

30.01.2020 | Ausgabe 4/2020 Open Access

Cracking and Failure Characteristics of Flame Cut Thick Steel Plates

T. Jokiaho, S. Santa-aho, P. Peura, M. Vippola

05.02.2020 | Ausgabe 4/2020

Microstructure Evolution of Multicomponent γ′-Strengthened Co-Based Superalloy at 750 °C and 1000 °C with Different Al and Ti Contents

Yi Zhang, Huadong Fu, Xiaozhou Zhou, Yuheng Zhang, Hongbiao Dong, Jianxin Xie

23.01.2020 | Ausgabe 4/2020

Adiabatic Shear Susceptibility of Fe50Mn30Co10Cr10 High-Entropy Alloy

Shuangjun Yang, Yang Yang, Zhiyu Yang, Chi Lu, Wenhui Liu

10.02.2020 | Ausgabe 4/2020

Features of Structure Formation in Layered Metallic Materials Processed by High Pressure Torsion

Stanislav O. Rogachev, Sergey A. Nikulin, Vladimir M. Khatkevich, Roman V. Sundeev, Alexander A. Komissarov

30.01.2020 | Ausgabe 4/2020

Interdiffusion in β (BCC) Phase of the Ti-Al-Mn System at 1100 °C

Aparna Tripathi, Anish Kulkarni, Kaustubh N. Kulkarni

21.01.2020 | Ausgabe 4/2020

The Influence of Porous Structure on the Interdiffusion Kinetics of Cu-Ni System During Spark Plasma Sintering

Ruidi Li, Pengda Niu, Shenghua Deng, Linjun Tang, Siyao Xie, Tiechui Yuan, Qigang Weng

31.01.2020 | Ausgabe 4/2020

Decarburization of 60Si2MnA in 20 Pct H2O-N2 at 700 °C to 900 °C

Yisheng R. Chen, Fan Zhang, Yu Liu

24.01.2020 | Ausgabe 4/2020

New Triazole and Isoxazole Compounds as Corrosion Inhibitors for Cu-Ni (90/10) Alloy and Galvanized Steel Substrates

M. A. Domínguez-Crespo, L. Gerardo Zepeda-Vallejo, A. M. Torres-Huerta, S. B. Brachetti-Sibaja, D. Palma-Ramírez, A. E. Rodríguez-Salazar, D. E. Ontiveros-de la Torre

13.01.2020 | Ausgabe 4/2020

Influence of Post-deposition Heat Treatments on the Microstructure and Mechanical Properties of Wire–Arc Additively Manufactured ATI 718Plus

O. Oguntuase, O. A. Ojo, J. Beddoes

21.01.2020 | Ausgabe 4/2020 Open Access

Temperature-Dependent Misfit Stress in Gamma Double Prime Strengthened Ni-Base Superalloys

R. Y. Zhang, H. L. Qin, Z. N. Bi, J. Li, S. Paul, T. L. Lee, S. Y. Zhang, J. Zhang, H. B. Dong

10.02.2020 | Ausgabe 4/2020

The Role of Silicon Morphology in the Electrical Conductivity and Mechanical Properties of As-Cast B319 Aluminum Alloy

Eli Vandersluis, Payam Emadi, Bernoulli Andilab, Comondore Ravindran

06.02.2020 | Ausgabe 4/2020

The β1 Triad-Related Configurations in a Mg-RE Alloy

Y. M. Zhu, H. Zhang, S. W. Xu, J. F. Nie

04.02.2020 | Ausgabe 4/2020

Effect of Al Content on Hot-Tearing Susceptibility of Mg-10Zn-xAl Alloys

G. Vinodh, H. R. Jafari Nodooshan, Dejiang Li, Xiaoqin Zeng, Bin Hu, Jon T. Carter, Anil K. Sachdev

05.02.2020 | Ausgabe 4/2020

Deformation Mechanism of Mg-Gd-Y-Zn-Zr Alloy Containing Long-Period Stacking Ordered Phases During Hot Rolling

Jianbo Shao, Zhiyong Chen, Tao Chen, Chuming Liu

06.02.2020 | Ausgabe 4/2020

Critical Properties and Magnetocaloric Effect in La0.7Ba0.3Mn0.8Ti0.2O3 Ceramic

L. V. Bau, O. Morán, P. T. Tho, P. T. Phong

03.02.2020 | Ausgabe 4/2020

Effect of Mo Addition on the Corrosion Behavior of Al-40Cr-xMo Coatings on Type 316L Stainless Steel

Avinash V. Ingle, V. S. Raja, P. Mishra, J. Rangarajan

29.01.2020 | Ausgabe 4/2020

Effect of Heat Treatment on Crystal Structure, Microstructure, and Hydrogenation Behavior of BCC 52Ti-12V-36Cr Alloys with Zr and Zr-Ni Additives

Amol Kamble, Pratibha Sharma, Jacques Huot

31.01.2020 | Correction | Ausgabe 4/2020

Correction to: Scandium Effect on Undercooling and Dendrite Morphology of Al-4.5 Wt Pct Cu Droplets

J. Valloton, A.-A. Bogno, H. Henein, D. M. Herlach, D. Sediako

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise