Ausgabe 5/1999
Inhalt (29 Artikel)
Formation of hcp martensite during the isothermal aging of an fcc Co-27Cr-5Mo-0.05C orthopedic implant alloy
A. de J. Saldívar García, A. Maní Medrano, A. Salinas Rodríguez
Influence of carbon content on superplastic behavior in Ti- and B-added Cr-Mo steels
M. Aramaki, K. Higashida, R. Onodera
Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels
A. Bag, K. K. Ray, E. S. Dwarakadasa
Statistical simulation of small fatigue crack nucleation and coalescence in a lamellar TiAl alloy
Kwais Chan, Bettina Wittkowsky, Michael Pfuff
Surface hardening of a gray cast iron used for a diesel engine cylinder block using high-energy electron beam irradiation
Seong-Hun Choo, Sunghak Lee, Soon-Ju Kwon
Influence of grain size and stacking-fault energy on deformation twinning in fcc metals
Ehab El-Danaf, Surya R. Kalidindi, Roger D. Doherty
Influence of grain size on the constitutive response and substructure evolution of MONEL 400
George T. Gray III, Shuh Rong Chen, Kenneth S. Vecchio
Effect of size and shape of tungsten particles on dynamic torsional properties in tungsten heavy alloys
Dong-Kuk Kim, Sunghak Lee, Heung-Sub Song
Strain dependence of pseudoelastic hysteresis of NiTi
Yinong Liu, I. Houver, H. Xiang, L. Bataillard, S. Miyazaki
Improvement of the resistance to stress corrosion cracking in austenitic stainless steels by cyclic prestraining
A. Chambreuil-Paret, T. Magnin
Dendrite growth processes of silicon and germanium from highly undercooled melts
Tomotsugu Aoyama, Yuzuru Takamura, Kazuhiko Kuribayashi
The effect of Sr and Fe additions on the microstructure and mechanical properties of a direct squeeze cast Al-7Si-0.3Mg alloy
J. X. Dong, P. A. Karnezis, G. Durrant, B. Cantor
Shock-induced reaction synthesis of isomorphous (Cu-Ni) and immiscible (Cu-Nb) compounds
A. H. Advani, N. N. Thadhani
Microstructure and mechanical behavior of spray-deposited High-Li Al-Li alloys
L. del Castillo, H. M. Hu, E. J. Lavernia, Y. Wu
High-energy X-ray computed tomography of the progression of the solidification front in pure aluminum
Mark M. Hytros, Imad M. Jureidini, Jung-Hoon Chun, Richard C. Lanza, Nannaji Saka
Cavitation and failure during hot forging of Ti-6Al-4V
S. L. Semiatin, R. L. Goetz, V. Seetharaman, E. B. Shell, A. K. Ghosh
Workability of commercial-purity titanium and 4340 steel during equal channel angular extrusion at cold-working temperatures
S. L. Semiatin, D. P. DeLo, V. M. Segal, R. E. Goforth, N. D. Frey
A thermodynamic interpretation of the size-ratio limits for laves phase formation
J. H. Zhu, C. T. Liu, L. M. Pike, P. K. Liaw
Discussion of “Reconsideration of error in the analysis of the wake dislocation problem”
F. O. Riemelmoser, R. Pippan