Ausgabe 6/2004
Inhalt (29 Artikel)
Experimental investigation and thermodynamic calculation of the phase equilibria in the Cu-Sn and Cu-Sn-Mn systems
X. J. Liu, R. Kainuma, C. P. Wang, I. Ohnuma, K. Ishida
Experimental determination of the carbon solubility limit in ferritic steels
J. Merlin, P. Merle, S. Garnier, M. Bouzekri, M. Soler
An effect of a strong magnetic field on the phase transformation in plain carbon steels
H. D. Joo, S. U. Kim, Y. M. Koo, N. S. Shin, J. K. Choi
Mechanism of primary MC carbide decomposition in Ni-base superalloys
G. Lvov, V. I. Levit, M. J. Kaufman
Magnetic contribution to the interdiffusion coefficients in bcc (α) and fcc (γ) Fe-Ni alloys
J. Yang, J. I. Goldstein
Characterization and modeling of quenching-induced residual stresses in the nickel-based superalloy IN718
D. Dye, K. T. Conlon, R. C. Reed
The influences of multiscale-sized second-phase particles on ductility of aged aluminum alloys
G. Liu, G. J. Zhang, X. D. Ding, J. Sun, K. H. Chen
Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation
Kiyoshi Matsubara, Yuichi Miyahara, Zenji Horita, Terence G. Langdon
Void nucleation by inclusion cracking
M. N. Shabrov, C. L. Briant, A. Needleman, S. Kim, E. Sylven, D. H. Sherman, L. Chuzhoy
Experimental and numerical study on the relationship between creep crack growth properties and fracture mechanisms
Masaaki Tabuchi, Jechang Ha, Hiromichi Hongo, Takashi Watanabe, Toshimitsu Yokobori Jr.
Effects of loading rate on fracture behavior of low-alloy steel with different grain sizes
G. Z. Wang, J. H. Chen, X. C. Ren
Thermomechanical fatigue behavior of the third-generation, single-crystal superalloy TMS-75: Deformation structure
H. Zhou, Y. Ro, Y. Koizumi, T. Kobayashi, H. Harada, I. Okada
Microstructural evolution in iron aluminide Fe-28Al-2C after high-temperature hydrogen treatment
T. Laha, R. Balasubramaniam, M. N. Mungole, A. Tewari, R. G. Baligidad
Intermetallic diffusion coatings for enhanced hot-salt oxidation resistance of nitrogen-containing austenitic stainless steels
U. Kamachi Mudali, N. Bhuvaneswaran, P. Shankar, H. S. Khatak, B. Raj
Residual stresses in high-velocity oxy-fuel metallic coatings
T. C. Totemeier, R. N. Wright, W. D. Swank
Overstability of lamellar eutectic growth below the minimum-undercooling spacing
S. Akamatsu, G. Faivre, M. Plapp, A. Karma
Eutectic grains in unmodified and strontium-modified hypoeutectic aluminum-silicon alloys
Stuart D. McDonald, Arne K. Dahle, John A. Taylor, David H. StJohn
Effect of thermomechanical treatment on the evolution of rolling and recrystallization textures in twin-belt cast AA5754 aluminum alloy
H. N. Azari, D. S. Wilkinson, S. X. Girard, D. J. Lloyd
A study on the microstructural evolution of Al-25 at. pct V-12.5 at. pct M (M = Cu, Ni, Mn) powders by planetary ball milling
Keun Young Chang, Kyoung Il Moon, Kyung Sub Lee
Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part II. Thermal modeling
S. M. Kelly, S. L. Kampe
Quantitative characterization of microstructures of liquid-phase-sintered two-phase materials
Jianxin Liu, Zhigang Zak Fang
A metallurgical interpretation of the static recrystallization kinetics of an intercritically deformed C-Mn steel
Haiwen Luo, Jilt Sietsma, Sybrand Van Der Zwaag
Mechanochemical processing of nanocrystalline Ti-6Al-4V alloy
M. D. S. Pirzada, F. H. (Sam) Froes, S. N. Patankar
The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys
M. S. Dargusch, G. L. Dunlop, A. L. Bowles, K. Pettersen, P. Bakke
Strengthening by γ/γ′ interfacial dislocation networks in TMS-162—Toward a fifth-generation single-crystal superalloy
J. X. Zhang, T. Murakumo, Y. Koizumi, T. Kobayashi, H. Harada
A solutal interaction mechanism for the columnar-to-equiaxed transition in alloy solidification
M. A. Martorano