Metallurgical and Materials Transactions A 6/2020

Tatiana Mishurova, Katia Artzt, Jan Haubrich, Sergei Evsevleev, Alexander Evans, Matthias Meixner, Itziar Serrano Munoz, Igor Sevostianov, Guillermo Requena, Giovanni Bruno

PDF-Version jetzt herunterladen Zum Volltext

23.03.2020 | Ausgabe 6/2020

Microstructures and Mechanical Properties of Dental Co-Cr-Mo-W Alloys Fabricated by Selective Laser Melting at Different Subsequent Heat Treatment Temperatures

Wei Wei, Yanan Zhou, Qi Sun, Ning Li, Jiazhen Yan, Haopeng Li, Wenbo Liu, Chongxiang Huang

21.04.2020 | Ausgabe 6/2020

Process-Dependent Composition, Microstructure, and Printability of Al-Zn-Mg and Al-Zn-Mg-Sc-Zr Alloys Manufactured by Laser Powder Bed Fusion

Le Zhou, Holden Hyer, Saket Thapliyal, Rajiv S. Mishra, Brandon McWilliams, Kyu Cho, Yongho Sohn

03.04.2020 | Ausgabe 6/2020

Mechanical Performance Improvement by Nitrogen Addition in N-CoCrNi Compositionally Complex Alloys

Dennis Edgard Jodi, Nuri Choi, Joohyun Park, Nokeun Park

29.03.2020 | Ausgabe 6/2020

Compressive and Corrosion Properties of Lotus-Type Porous Mg-Mn Alloys Fabricated by Unidirectional Solidification

Canxu Zhou, Yuan Liu, Huawei Zhang, Xiang Chen, Yanxiang Li

19.04.2020 | Ausgabe 6/2020

The Fracture Behavior of 7085-T74 Al Alloy Ultra-Thick Plate During High Cycle Fatigue

Pan Dai, Xian Luo, Yanqing Yang, Zongde Kou, Bin Huang, Jinxin Zang, Jigang Ru

17.04.2020 | Ausgabe 6/2020

Corrosion and Tribocorrosion Behavior of Ti-40Nb and Ti-25Nb-5Fe Alloys Processed by Powder Metallurgy

Ihsan Çaha, Alexandra Alves, Caterina Chirico, Ana Pinto, Sophia Tsipas, Elena Gordo, Fatih Toptan

19.04.2020 | Ausgabe 6/2020

Accelerating the Discovery of New DP Steel Using Machine Learning-Based Multiscale Materials Simulations

Abdallah A. Chehade, Tarek M. Belgasam, Georges Ayoub, Hussein M. Zbib

19.03.2020 | Ausgabe 6/2020

Influence of Graphene, SiCnp, and G/SiCnp Hybrid Fillers on the Strengthening Mechanisms of Al-Matrix

Mohamed Shokeir, Sandy El Moghazi, Ahmed F. Omara, Ahmed ElGhazaly, Mohamed M. Emara, Hanadi G. Salem

Aktuelle Ausgaben

Metallurgical and Materials Transactions A 1/2021

Ausgabe 1/2021

Metallurgical and Materials Transactions A 12/2020

Ausgabe 12/2020

Metallurgical and Materials Transactions A 11/2020

Ausgabe 11/2020

Metallurgical and Materials Transactions A 10/2020

Ausgabe 10/2020

Metallurgical and Materials Transactions A 9/2020

Ausgabe 9/2020

Metallurgical and Materials Transactions A 8/2020

Ausgabe 8/2020

Metallurgical and Materials Transactions A 7/2020

Ausgabe 7/2020

Metallurgical and Materials Transactions A 6/2020

Ausgabe 6/2020

Metallurgical and Materials Transactions A 5/2020

Ausgabe 5/2020

Metallurgical and Materials Transactions A 4/2020

Ausgabe 4/2020

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Bildnachweise

Springer Professional

Inhaltsverzeichnis ( 55 Artikel )

Editorial: 50 Years of High Impact Research

An Overview of the Thermomechanical Processing of α/β Titanium Alloys: Current Status and Future Research Opportunities

Solving Recent Challenges for Wrought Ni-Base Superalloys

Solidification of Metallic Alloys: Does the Structure of the Liquid Matter?

Viewpoint on the Formation and Evolution of Annealing Twins During Thermomechanical Processing of FCC Metals and Alloys

Creep of the Matrix During Coalescence and Overgrowth of Graphite Precipitates in a High-Silicon Spheroidal Graphite Iron Submitted to Thermal Cycling in the Ferritic Domain

A New Sight of the Growth Characteristics of Solidified Al3Ni at the Liquid–Solid Interface by Synchrotron Radiography and 3D Tomography

Heterogeneous Nucleation of Eutectic Structure in Al-Mg-Si Alloys

Outstanding Tensile Ductility in High Iron-Containing Al-Si-Cu Alloys

Effect of Si on the Growth Behavior of the Fe2Al5 Phase at Al-xSi(liquid)/Fe(solid) Interface During Holding by In-Situ Synchrotron Radiography

Significant Grain Refinement in the Simulated Heat-Affected Zone (HAZ) of Ferritic Stainless Steels by Alloying with Tungsten

Phase Transformation and Atypical Variants in an Extruded Two Phase Zirconium Tube

Effects of Y on the Deformation Mechanisms of Extruded Mg-Y Sheets During Room-Temperature Compression

Low Cycle Fatigue Behavior of a Directionally Solidified Nickel-Based Superalloy: Mechanistic and Microstructural Aspect

Tensile Behavior of Air Plasma Spray MCrAlY Coatings: Role of High Temperature Agings and Process Defects

Influence of Grain Refinement and Microstructure on Fatigue Behavior for Solid-State Additively Manufactured Al-Zn-Mg-Cu Alloy

Microstructure, Mechanical Properties, and Sliding Wear Behavior of Oxide-Dispersion-Strengthened FeMnNi Alloy Fabricated by Spark Plasma Sintering

The Effect of Second Tempering on Hydrogen Embrittlement of Ultra-High-Strength Steel

Delamination Morphology Maps of Chromium Oxide Scales Formed on Cr-Based Alloys

Significantly Enhanced Wear Resistance of an Ultrafine-Grained CrFeNi Medium-Entropy Alloy at Elevated Temperatures

Investigation on the Microstructure and Mechanical Properties of Ti-1.0Fe Alloy with Equiaxed α + β Microstructures

Process Parametric Dependency of Axial Downward Force and Macro- and Microstructural Morphologies in Ultrasonically Assisted Friction Stir Welding of Al/Mg Alloys

Initial Boron Uptake and Kinetics of Transient Liquid Phase Bonding in Ni-Based Superalloys

Interface Kinematics of Laser Impact Welding of Ni and SS304 Based on Jet Indentation Mechanism

Effect of Morphological Change of Ni3Sn4 Intermetallic Compounds on the Growth Kinetics in Electroless Ni-P/Sn-3.5Ag Solder Joint

Effect of Welding Speed on Texture in Laser-Welded Dual-Phase Steel

Relationship Between Impact Toughness and Microstructure for the As-Rolled and Simulated HAZ of Low-Carbon Steel Containing Ti-Ca Oxide Particles

Segmentation and Alignment of Nd2Fe14B Platelets in Nd-Cu Eutectic Alloys Using the Electromagnetic Vibration Technique

The Nature of Native MgO in Mg and Its Alloys

An In-Situ Diagnostic Study of Electromagnetic Stirring Effects on Peritectic Solidification Kinetics for Containerlessly Processed Liquid Fe-Ti Alloys

Microstructure Evolution and Phase Formation of Fe25Ni25CoxMoy Multi-principal-Component Alloys

δ-Ferrite Formation and Its Effect on the Mechanical Properties of Heavy-Section AISI 316 Stainless Steel Casting

Impact of a Multi-step Heat Treatment on Different Manufacturing Routes of 18CrNiMo7-6 Steel

Influence of Intercritical Temperature on the Microstructure and Mechanical Properties of 6.5 Pct Ni Steel Processed by Ultra-fast Cooling, Intercritical Quenching and Tempering

Quenching and Partitioning–Based Heat Treatment for Rolled Grinding Steel Balls

Subtleties Behind Hydrogen Embrittlement of Cadmium-Plated 4340 Steel Revealed by Thermal Desorption Spectroscopy and Sustained-Load Tests

Viscoplastic Self-consistent Modeling of the Through-Thickness Texture of a Hot-Rolled Al-Mg-Si Plate

Investigation of Surface Segregation in Fe-Cr-Si Alloys by XPS

Preparation of Fine-Grained W-Ni-Fe Alloys by Using W Nanopowders

Explaining Deviatoric Residual Stresses in Aluminum Matrix Composites with Complex Microstructure

Concentration-Dependent High-Temperature Deformation Mechanism of Hexagonal Close-Packed Ti-Al Alloys

Aging of an Al-Mg-Si Alloy with a Silicon Excess and Reinforced with Ceramic Particles

Interdiffusion, Solubility Limit, and Role of Entropy in FCC Al-Co-Cr-Fe-Ni Alloys

Unusual Iron Nitride Formation Upon Nitriding Fe-Si Alloy

Preparation of Pulse Electrodeposited Ni-B Coating with RSM Software and Evaluation of Its Microhardness and Electrochemical Behavior

Effects of Robotic Hammer Peening on Structural Properties of Ni-Based Single-Crystal Superalloy: Dislocation Slip Traces and Crystallographic Reorientations

Connecting Diffraction-Based Strain with Macroscopic Stresses in Laser Powder Bed Fused Ti-6Al-4V