Ausgabe 7/2025
Inhalt (35 Artikel)
In Situ Observation of Gravity and Size Effects on Thermo-Solutal Convection During Directional Solidification
- Brief Communication
Di Wang, Jingzhe Wang, Bowen Chen, Dexin Ma, Wenkai Deng, Yunxing Zhao, Weitai Xu, Yong Liu, Zaiwang Huang
Boron Induces Cracking in 22MnB5 Hot-Stamping Steel Produced by Strip Casting
- Brief Communication
Renyi Yang, Haoyu Wang, Wanlin Wang, Chenyang Zhu, Jie Zeng
Effects of Cooling Rate During Solid Solution Treatment on Precipitation Behavior and Hardness in Ni–38Cr–3.8Al Alloys
- Open Access
- Original Research Article
Kazuaki Yamamoto, Masayoshi Kumagai, Junzo Shimbe, Hiroyuki Uchima
Effect of Stress State on Plastic Behavior, Deformation Mechanism, and Texture Evolution of an Mg–Gd–Y Alloy
- Original Research Article
Pengfei Wu, Yanshan Lou
Effects of Fe, Cr, and Ni Contents on the Microstructure and Mechanical Behaviors of Ti-x(0.7Fe–0.18Cr–0.12Ni) Alloys Fabricated by Thermomechanical Powder Consolidation
- Original Research Article
Jiaqi Hu, Lei Meng, Cong Wang, Hongchen Lai, Yuanping Yu, Deliang Zhang
A Density Functional Theory Study of Phase Stability and Stacking Fault Energy in Co–Re Alloys
- Open Access
- Original Research Article
Martin Bäker
Differentiation and Quantification of Bainite and Martensite in Medium-Carbon Bainitic Steel
- Original Research Article
Naiyou Xiao, Yuqi Liu, Jianhua Zhou, Tao Jia
Understanding Dendrite Morphology Complexity Under Multi-Mode Magnetohydrodynamic Flows: A Parallel Multigrid-Accelerated Three-Dimensional Phase-Field Study
- Original Research Article
Congjiang Zhang, Hongda Kang, Yufeng Yang, Haoyu Zhou, Weili Ren, Biao Ding, Tianxiang Zheng, Zuosheng Lei, Ang Zhang, Xiaotan Yuan, Yunbo Zhong
Innovative Constant Radius Cross-Route Process for Enhancing Mechanical Properties of Copper Sheets
- Original Research Article
Nikhil Tripathi, Prince Setia, Nitish Raja, Kallol Mondal, Shashank Shekhar
The Synergistic Effect of Prior Ferrite and Mn Heterogeneity on Bainite and Martensite Transformation Kinetics
- Original Research Article
Naiyou Xiao, Yuqi Liu, Tao Jia
Overcoming Marangoni Migration in Immiscible Alloys: Gradient Magnetic Field-Induced Spatial and Morphological Regulation of Minority Phase Revealed by X-ray Computed Tomography
- Original Research Article
Yunbo Zhong, Zhonghan Qin, Weili Ren, Zuosheng Lei, Bangfei Zhou, Wenhao Lin, Tianxiang Zheng, Chuanying Xi
Evolution of Microstructure in Waspaloy During Profiled Ring Rolling Process
- Original Research Article
Chuan Wang, Xin Li, He Jiang, Jianxin Dong
Effect of Filler Wire Composition on Microstructure and Properties of 1500 MPa Ultrahigh-Strength Steel by Laser Welding
- Original Research Article
Fei Teng, Xiaonan Wang, Zhigong Jiang, Rendong Liu, Dong Lv, Xin Xu, Hongshuang Di
Section-Sensitivity Assessment of 4.2 Wt Pct Silicon Ductile Iron Based on New Material Integrity Index
- Open Access
- Original Research Article
Giuliano Angella, Parnian Govahi, Manuel Schiralli, Marcin Górny, Stefano Masaggia, Franco Zanardi
Time-Dependent 600 °C Post-Weld Heat Treatment Response of Laser-Wire-Directed Energy Deposited Austenitic Stainless Steel Claddings on Carbon Steel
- Original Research Article
Scott C. Bozeman, Lukas Daut, Brian K. Bay, O. Burkan Isgor, Julie D. Tucker
Nanomechanical Properties and Application Potential of PbWO4 Crystals: Mechanical Behavior and Characterization
- Open Access
- Original Research Article
Mehmet Isik, Gozde Altuntas, Nizami Gasanly
Effect of Layered Architectural Design on the Tribological Behaviour of AlTiN/AlTiCrN-Based Cathodic Arc Evaporated Physical Vapour Deposition Coatings
- Original Research Article
Musa Muhammed, Mousa Javidani, Tahere Ebrahimi Sadrabadi, Majid Heidari, Tom Levasseur, Mohammad Jahazi
Effect of Q&P Heat Treatments on the Microstructure, Tensile Mechanical Behavior, and Fracture Toughness of a Commercial CMnSi Alloy Aiming to Obtain a Third-Generation AHSS
- Original Research Article
Charles H. X. M. Magalhães, Leonardo B. Godefroid, Geraldo L. Faria
Stretching Oriented Microstructures to Accelerate Rayleigh Instability During Rapid Thermal Processing for Generating Thixotropic Material
- Open Access
- Original Research Article
Sathyanarayan Sairam Jaishankar, Donggang Yao, Jack G. Zhou
Effect of Tempering on Microstructure and Tensile Properties of Ultra-High Strength Steels for Press Hardening Applications
- Open Access
- Original Research Article
Khalifa Maissara, Farnoosh Forouzan, Pia Åkerfeldt, Ilana Timokhina, Paul Åkerström, Esa Vuorinen, Marta-Lena Antti
Fundamental Investigation of the Interface Formation of Multi-material Additive Manufactured 316L-CuSn10 Structures
- Open Access
- Original Research Article
Alasdair Bulloch, Andy Harris, Allin Groom, Amanda Cruchley, Christopher J. Tuck, Marco Simonelli
Influence of Iron Addition on Fracture Mechanism and Toughness in the AlCoCrFeNi2.1 Eutectic High-Entropy Alloy
- Original Research Article
Cal Siemens, Hui Yuan, Jidong Kang, David S. Wilkinson
Improvement of Wear Resistance and Mechanical Properties of Cu–Ni Alloy by Low Temperature Aluminizing
- Open Access
- Original Research Article
Azmi Erdogan, Tuba Yener, Kadir Mert Doleker
Microstructure Dependence and Molecular Dynamics Simulation of Damping Mechanism for Fe–Mn Alloy
- Original Research Article
Na Yan, Xiaohu Jing, Longchen He, Bing Wang, Bingbo Wei
Effect of Growth Orientation on Solidification Process of Nickel-Based Single Crystal Superalloy DD6
- Original Research Article
Zhiqiang Yang, Songsong Hu, Yingzheng Chen, Ming He, Wendao Li, Weimin Bai, Xinming Wang
On the Work-Hardening Behavior and Tensile Properties of a TWIP Steel when Cu or Al is Introduced into the Alloy Composition
- Original Research Article
A. V. Druker, M. F. Giordana, N. De Vincentis, M. F. Sklate Boja, J. Malarría
Impact of Al and Cr on the Microstructure and Corrosion Behavior of AlCrFeMn Alloy Systems
- Original Research Article
Jarrod Gesualdi, Peyman Asghari-Rad, Thomas P. Nigl, Cameron F. Blanchard, Hojong Kim
Enhancing Glass-Forming Ability and Thermal Stability of Zr-Based Bulk Metallic Glasses Through Rare Earth Element Alloying
- Original Research Article
Juhi Verma, Yogesh Prabhu, Jatin Bhatt
Phase Transformation Pathways and Mechanical Behavior of Heat-Treated Direct Metal Laser Sintered Additively Manufactured Ti6Al4V Alloy
- Original Research Article
Bishnu Prasad Mahto, Abhishek Tripathi, A. G. Rao, Rajiv Kumar, R. K. Rai, M. K. Mishra
Effect of In Addition on the Microstructure and Mechanical Properties of an Al–Cu–Mg–Ag Alloy
- Original Research Article
Zuoqiong Ouyang, Pan Deng, Wenfeng Mo, Yuzhe Pan, Shuai Wang, Zhenhai Bai, Binghui Luo
Grain Size Effects on Permanent Strength in Al–Mg Alloy Processed by Severe Plastic Deformation
- Original Research Article
Takayuki Koizumi, Kazuki Toshima, Mitsutoshi Kuroda
Superelasticity and Wear Behaviour of Ni(50−X)Ti50FeX (X = 0 to 10 At. Pct) Alloys
- Original Research Article
Jagadish Parida, Subash Chandra Mishra, Deepak Kumar Satapathy, Ajit Behera
Effect of Phosphorus on Intermediate Temperature Embrittlement of High Silicon Spheroidal Graphite Cast Irons
- Open Access
- Original Research Article
Rodolfo González-Martínez, Jon Sertucha, Yannick Thébaut, Jacques Lacaze
Retraction Note: Effect of Silane-Functionalized RuO2 Nanoparticles on the Anticorrosive and Mechanical Properties of Poly (Methyl Methacrylate) Coatings
- Retraction Note
Joseph Raj Xavier, S. P. Vinodhini, J. Raja Beryl
