Ausgabe 8/2015
Inhalt (46 Artikel)
Microstructural and Fracture Behavior of Phosphorus-Containing Fe-30Mn-9Al-1Si-0.9C-0.5Mo Alloy Steel
Ryan A. Howell, David C. Van Aken
Improving the High-Cycle Fatigue Lives of Fe-30Mn-0.9C Twinning-Induced Plasticity Steel Through Pre-straining
B. Wang, Z. J. Zhang, C. W. Shao, Q. Q. Duan, J. C. Pang, H. J. Yang, X. W. Li, Zhe-Feng Zhang
Influence of Grain Shape, Size, and Grain Boundary Diffusion on High-Temperature Oxidation of Pure Metal Fe, Cu, and Zn
Sneha Samal, S. K. Mitra
Microstructural Origin of Friction Stir Processed Zone in a Magnesium Alloy
A. Tripathi, A. Tewari, N. Srinivasan, G. M. Reddy, S. M. Zhu, J. F. Nie, R. D. Doherty, I. Samajdar
On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
Nesma T. Aboulkhair, Chris Tuck, Ian Ashcroft, Ian Maskery, Nicola M. Everitt
Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys
Crystopher Brito, Thiago A. Costa, Talita A. Vida, Felipe Bertelli, Noé Cheung, José Eduardo Spinelli, Amauri Garcia
Crystallization Kinetics and Phase Transformation Mechanisms in Cu56Zr44 Glassy Alloy
Ilkay Kalay, Matthew J. Kramer, Ralph E. Napolitano
Formation and Stability of Pb-Sn Embedded Multiphase Alloy Nanoparticles via Mechanical Alloying
Patan Yousaf Khan, M. Manolata Devi, Krishanu Biswas
Ultrasonic Characterization of Microstructural Changes in Ti-10V-4.5Fe-1.5Al β-Titanium Alloy
A. Viswanath, Anish Kumar, T. Jayakumar, B. Purnachandra Rao
Influence of Nb-Microalloying on the Formation of Nano/Ultrafine-Grained Microstructure and Mechanical Properties During Martensite Reversion Process in a 201-Type Austenitic Stainless Steel
Hojjat Samaei Baghbadorani, Ahmad Kermanpur, Abbas Najafizadeh, Peiman Behjati, Mohammad Moallemi, Ahad Rezaee
Accommodation of Plastic Deformation by Ultrasound-Induced Grain Rotation
R. K. Dutta, R. H. Petrov, M. J. M. Hermans, I. M. Richardson
Analysis of Precipitation Kinetics on the Basis of Particle-Size Distributions
Bastian Rheingans, Eric Jan Mittemeijer
Structural Stabilities of β-Ti Alloys Studied Using a New Mo Equivalent Derived from [β/(α + β)] Phase-Boundary Slopes
Qing Wang, Chuang Dong, Peter K. Liaw
Finite Element Analysis of Deformation Due to Ball Indentation and Evaluation of Tensile Properties of Tempered P92 Steel
Dipika R. Barbadikar, A. R. Ballal, D. R. Peshwe, M. D. Mathew
Effect of Laves Phase on High-Temperature Deformation and Microstructure Evolution in an 18Cr-2Mo-0.5Nb Ferritic Stainless Steel
Ken-ichi Ikeda, Nana Kwame Gyan Yamoah, William T. Reynolds Jr., Jun-ichi Hamada, Mitsuhiro Murayama
Strengthening Mechanisms in Thermomechanically Processed NbTi-Microalloyed Steel
Andrii G. Kostryzhev, Olexandra O. Marenych, Chris R. Killmore, Elena V. Pereloma
The Impact of Martensite Deformation on Shape Memory Effect Recovery Strain Evolution
Asheesh Lanba, Reginald F. Hamilton
Analysis of the Coupling Effects of TiB Whiskers and TiC Particles on the Fracture Toughness of (TiB + TiC)/TC4 Composites: Experiment and Modeling
Weijie Lu, Xianglong Guo, Jialin Meng, Fangqiu Wang, Liqiang Wang, Di Zhang
Mechanical Properties Involved in the Micro-forming of Ultra-thin Stainless Steel Sheets
Cong-Hanh Pham, Sandrine Thuillier, Pierre-Yves Manach
Effect of Aged Microstructure on the Strength and Work Hardening Behavior of Ti-15V-3Cr-3Sn-3Al Alloy
Rajdeep Sarkar, A. Mukhopadhyay, P. Ghosal, T. K. Nandy, K. K. Ray
Effect of Quarterly Element Addition of Cobalt on Phase Transformation Characteristics of Cu-Al-Ni Shape Memory Alloys
Safaa Najah Saud, Tuty Asma Abu Bakar, Esah Hamzah, Mustafa Khaleel Ibrahim, Abollah Bahador
Evaluation of Magnesium Die-Casting Alloys for Elevated Temperature Applications: Microstructure, Tensile Properties, and Creep Resistance
Suming Zhu, Mark A. Easton, Trevor B. Abbott, Jian-Feng Nie, Matthew S. Dargusch, Norbert Hort, Mark A. Gibson
Effect of Structural Heterogeneity on In Situ Deformation of Dissimilar Weld Between Ferritic and Austenitic Steel
M. Ghosh, R. Santosh, S. K. Das, G. Das, B. Mahato, J. Korody, S. Kumar, P. K. Singh
Microheterogeneous Structure of Local Melted Zones in the Process of Explosive Welding
Bella A. Greenberg, Mikhail A. Ivanov, Alexei V. Inozemtsev, Alexander M. Patselov, Mark S. Pushkin, Alisa M. Vlasova
Variation in the Chemical Driving Force for Intragranular Nucleation in the Multi-pass Weld Metal of Ti-Containing High-Strength Low-Alloy Steel
Yongjoon Kang, Kyutae Han, Joo Hyun Park, Changhee Lee
The Apparent Contact Angle and Wetted Area of Active Alloys on Silicon Carbide as a Function of the Temperature and the Surface Roughness: A Multivariate Approach
Wolfgang Tillmann, Jan Pfeiffer, Lukas Wojarski
Forge Welding of Magnesium Alloy to Aluminum Alloy Using a Cu, Ni, or Ti Interlayer
Hideki Yamagishi, Junji Sumioka, Shigeki Kakiuchi, Shogo Tomida, Kouichi Takeda, Kouichi Shimazaki
N and C Interstitial Diffusion and Thermodynamic Interactions in -Iron Carbonitride
Holger Göhring, Andreas Leineweber, Eric Jan Mittemeijer
A Study of the Batch Annealing of Cold-Rolled HSLA Steels Containing Niobium or Titanium
Chao Fang, C. Isaac Garcia, Shi-Hoon Choi, Anthony J. DeArdo
Effects of Initial Powder Compact Thickness, Lubrication, and Particle Morphology on the Cold Compaction Behavior of Ti Powder
Jia Lou, Brian Gabbitas, Deliang Zhang, Fei Yang
Microstructure, Texture, and Orientation-Dependent Flow Behavior of Binary Ni-16Cr and Ni-16Mo Solid Solution Alloys
K. K. Mehta, Prantik Mukhopadhyay, R. K. Mandal, A. K. Singh
DICTRA Simulation of Holding Time Dependence of NbC Size and Experimental Study of Effect of NbC on Austenite Grain Growth
Su-Fen Tao, Fu-Ming Wang, Gui-Lin Sun, Zhan-Bing Yang, Chang-Rong Li
Microstructural Analysis and the Multicolor UV/Violet/Blue/Green/Yellow PL Observed from the Synthesized ZnO Nano-leaves and Nano-rods
Ivana Lj. Validžić, Miodrag Mitrić, S. Phillip Ahrenkiel, Mirjana I. Čomor
Structural and Thermal Study of Nanocrystalline Fe-Al-B Alloy Prepared by Mechanical Alloying
Hana Ibn Gharsallah, Abderrahmen Sekri, Myriam Azabou, Luiza Escoda, Joan Josep Suñol, Mohamed Khitouni
Micromechanical Modeling the Plastic Deformation of Particle-Reinforced Bulk Metallic Glass Composites
Yunpeng Jiang, Xueping Shi, Kun Qiu
On the Formation of Sludge Intermetallic Particles in Secondary Aluminum Alloys
Stefano Ferraro, Anton Bjurenstedt, Salem Seifeddine
Characterization and Formation of Rod-Shaped (Al,Si)3Ti Particles in an Al-7Si-0.35Mg-0.12Ti (Wt Pct) Alloy
Xiang Gao, Yuman Zhu, Mark A. Easton, Barbara Rinderer, Mal Couper, Jian-Feng Nie
Effects of Sn Addition on the Microstructures and Mechanical Properties of Mg-6Zn-3Cu-xSn Magnesium Alloys
Tao Zhang, Jun Shen, Jia-Xin Sang, Yang Li, Pei-Pei He
Finite Element Modeling on the Compaction of Copper Powder Under Different Conditions
Xizhong An, Yilei Zhang, Yuxi Zhang, Shuo Yang
Analysis of Obstacle Hardening Models Using Dislocation Dynamics: Application to Irradiation-Induced Defects
Cameron Sobie, Nicolas Bertin, Laurent Capolungo
The Effects of Cold Work on the Microstructure and Mechanical Properties of Intermetallic Strengthened Alumina-Forming Austenitic Stainless Steels
B. Hu, G. Trotter, Ian Baker, M. K. Miller, L. Yao, S. Chen, Z. Cai
Erratum to: Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys
Crystopher Brito, Thiago A. Costa, Talita A. Vida, Felipe Bertelli, Noé Cheung, José Eduardo Spinelli, Amauri Garcia