Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 8/2021

Ausgabe 8/2021

Inhaltsverzeichnis ( 35 Artikel )

25.05.2021 | Brief Communication | Ausgabe 8/2021

Tailoring the Microstructure of Coarse-Grained HAZ in Steel for Large Heat Input Welding: Effect of Ti–Mg–Ce–V Inclusion/Precipitation Particles

Chao Wang, Junjie Hao, Jian Kang, Guo Yuan, R. Devesh K. Misra, Guodong Wang

25.05.2021 | Brief Communication | Ausgabe 8/2021

On the Decarburization of Surface Pearlite

Sai Li, Zenan Yang, Hatem S. Zurob, Hao Chen, Chi Zhang, Zhigang Yang

26.05.2021 | Original Research Article | Ausgabe 8/2021

Improved Distribution and Uniformity of α-Al(Mn,Cr)Si Dispersoids in Al-Mg-Si-Cu-Mn (6xxx) Alloys by Two-Step Homogenization

Zhen Li, Jian Qin, Haitao Zhang, Xiaoguo Wang, Bo Zhang, Hiromi Nagaumi

20.05.2021 | Original Research Article | Ausgabe 8/2021 Open Access

Compendium About Multicomponent Interdiffusion in Two Dimensions

Bogusław Bożek, Lucjan Sapa, Katarzyna Tkacz-Śmiech, Marek Zajusz, Marek Danielewski

19.05.2021 | Original Research Article | Ausgabe 8/2021

Effect of Thermomechanical Fatigue on Precipitation Microstructure in Two Precipitation-Hardened Cast Aluminum Alloys

Francois-Xavier Hoche, Loeïz Naze, Luc Remy, Alain Köster, Pierre Osmond

21.05.2021 | Original Research Article | Ausgabe 8/2021

Electrochemical Insight into the Role of H2O2 in Galvanostatic Passivation of AISI 316L Austenitic Stainless Steel in Citric Acid Electrolyte

Nika Zakerin, Khashayar Morshed-Behbahani

27.05.2021 | Original Research Article | Ausgabe 8/2021 Open Access

Texture-Based Optimization of Crystal Plasticity Parameters: Application to Zinc and Its Alloy

Karol Frydrych, Anna Jarzębska, Saketh Virupakshi, Katarzyna Kowalczyk-Gajewska, Magdalena Bieda, Robert Chulist, Monika Skorupska, Norbert Schell, Krzysztof Sztwiertnia

27.05.2021 | Original Research Article | Ausgabe 8/2021 Open Access

Effect of Cold Working and Long-Term Heating in Air on the Stress Corrosion Cracking Growth Rate in Commercial TT Alloy 690 Exposed to Simulated PWR Primary Water

Toshio Yonezawa, Atsushi Hashimoto

21.05.2021 | Original Research Article | Ausgabe 8/2021

Effect of Nanosecond Laser-Textured Ablation on Performance of Ti6Al4V Alloy Prepared by Composite Nitriding Process

Jing Zhang, Zhou Yu, Jun Hu

23.05.2021 | Original Research Article | Ausgabe 8/2021

Influence of Laser Peening With and Without Coating on the Surface Properties and Stress Corrosion Cracking Behavior of Laser-Welded 304 Stainless Steel

Simge Gencalp Irizalp, Burcak Kardelen Koroglu, David Sokol

02.06.2021 | Original Research Article | Ausgabe 8/2021

Strength of 316L Stainless Steel Single-Lap Joints Brazed with Ni-Based Metallic Glass Foils for Corrosive Environments

David J. Kemmenoe, Eric A. Theisen, Shefford P. Baker

20.05.2021 | Original Research Article | Ausgabe 8/2021

Floating Grain Formation and Macrosegregation in a 2024 Al Alloy Prepared by Hot-Top DC Casting with a 2024 Al Alloy Insert

Cheng Zhu, Zhihao Zhao, Qingfeng Zhu, Gaosong Wang, Xudong Liu, Yubo Zuo, Hanchun Dong, Gaowu Qin

11.06.2021 | Original Research Article | Ausgabe 8/2021

Effect of Compositional Variation on the Microstructural Evolution and the Castability of Al–Mg–Si Ternary Alloys

Abdul Wahid Shah, Seong-Ho Ha, Bong-Hwan Kim, Young-Ok Yoon, Hyun-Kyu Lim, Shae K. Kim

19.05.2021 | Original Research Article | Ausgabe 8/2021

Understanding the Role of Short-Range Order in the Nucleation and Transformation of the B′/Q′ Precipitates in Al-Mg-Si(-Cu) Alloys

Lipeng Ding, Yaoyao Weng, Zhihong Jia, Ruojin Zang, Qing Liu

01.06.2021 | Original Research Article | Ausgabe 8/2021

Effect of Heat Treatment on the Microstructural Evolution and Properties of 3D-Printed and Conventionally Produced Medical-Grade Ti6Al4V ELI Alloy

Niyousha Azgomi, Francis Tetteh, Solomon Hanson Duntu, Solomon Boakye-Yiadom

19.05.2021 | Original Research Article | Ausgabe 8/2021

The Evolution of Oxygen-Based Inclusions in an Additively Manufactured Super-Duplex Stainless Steel

A. D. Iams, J. S. Keist, L. A. Giannuzzi, T. A. Palmer

27.05.2021 | Original Research Article | Ausgabe 8/2021 Open Access

A Multiscale-Based Approach to Understand Dendrite Deflection in Continuously Cast Steel Slab Samples

Arunava SenGupta, Begoña Santillana, Seetharaman Sridhar, Michael Auinger

27.05.2021 | Original Research Article | Ausgabe 8/2021

The Influence of Composition on the Solidification Path and Microstructure of HP-Nb Alloys

Sean Orzolek, John N. DuPont

19.05.2021 | Original Research Article | Ausgabe 8/2021

Effect of Ti Addition and Microstructural Evolution on Toughening and Strengthening Behavior of as Cast or Annealed Nb–Si–Mo Based Hypoeutectic and Hypereutectic Alloys

Kasturi Sala, Rahul Mitra

25.05.2021 | Original Research Article | Ausgabe 8/2021 Open Access

An Investigation into the Correlation of Small Punch and Uniaxial Creep Data for Waspaloy

T. Williams, M. Evans, W. Harrison

26.05.2021 | Original Research Article | Ausgabe 8/2021

Post-Weld Heat Treatment of Additively Manufactured Inconel 718 Welded to Forged Ni-Based Superalloy AD730 by Linear Friction Welding

Seyedmohammad Tabaie, Farhad Rézaï-Aria, Bertrand C.D. Flipo, Jonathan Cormier, Mohammad Jahazi

11.06.2021 | Original Research Article | Ausgabe 8/2021

Effect of Varying Molar Volume on Interdiffusion Analysis in a Binary System

Aparna Tripathi, Kaustubh N. Kulkarni

19.05.2021 | Original Research Article | Ausgabe 8/2021

The Effect of Bridge Geometry on Microstructure and Texture Evolution During Porthole Die Extrusion of an Al–Mg–Si–Mn–Cr Alloy

Yu Wang, Andrew Zang, Yahya Mahmoodkhani, Mary Wells, Warren Poole, Nick Parson

26.05.2021 | Original Research Article | Ausgabe 8/2021 Open Access

Recovery and Recrystallization Behaviors of Ni–30 Mass Pct Fe Alloy During Uniaxial Cold and Hot Compression

Itsuki Yamaguchi, Mitsuharu Yonemura

25.05.2021 | Original Research Article | Ausgabe 8/2021 Open Access

Impact of Thermal Oxidation on Morphological, Structural and Magnetic Properties of Fe-Ni Wire-Like Nanochains

Marcin Krajewski, Mateusz Tokarczyk, Sabina Lewińska, Kamil Bochenek, Anna Ślawska-Waniewska

29.05.2021 | Original Research Article | Ausgabe 8/2021

Creep Properties of 9Cr and 14Cr ODS Tubes Tested by Inner Gas Pressure

D. Sornin, U. Ehrnstén, N. Mozzani, J. Rantala, M. Walter, A. Hobt, J. Aktaa, E. Oñorbe, M. Hernandez-Mayoral, A. Ulbricht, S. Gicquel, L. Frank, Y. de Carlan

23.05.2021 | Original Research Article | Ausgabe 8/2021

Tensile Properties and Fracture Behavior of ATI 718Plus Alloy at Room and Elevated Temperatures

Micheal Kattoura, Gopal B. Viswanathan, Seetha R. Mannava, Dong Qian, Vijay K. Vasudevan

09.06.2021 | Original Research Article | Ausgabe 8/2021

Effect of Heat Treatment on the Electrochemical and Mechanical Behavior of the Ti6Al4V Alloy

Mercedes Paulina Chávez-Díaz, María Lorenza Escudero-Rincón, Jesús Chao, Elsa Miriam Arce-Estrada, Román Cabrera-Sierra

27.05.2021 | Original Research Article | Ausgabe 8/2021

Size Effects on the Mechanical Responses and Deformation Mechanisms of AZ31 Mg Foils

Shuai Xu, Xiaoqing Shang, Haiming Zhang, Xianghuai Dong, Zhenshan Cui

01.06.2021 | Original Research Article | Ausgabe 8/2021

Overcoming the Strength-Plasticity Trade-Off in a Multi-phase Equiatomic CrCuNiTiV 3d Transition Metal High-Entropy Alloy

Jiaojiao Yi, Lin Yang, Song Tang, Fuyang Cao, Mingqin Xu, Lu Wang

06.06.2021 | Original Research Article | Ausgabe 8/2021 Open Access

Effects of Solidification Conditions on Grain Refinement Capacity of TiC in Directionally Solidified Ti6Al4V Alloy

Naoki Date, Shunya Yamamoto, Yoshimi Watanabe, Hisashi Sato, Shizuka Nakano, Naoko Sato, Shinsuke Suzuki

31.05.2021 | Original Research Article | Ausgabe 8/2021 Open Access

Novel Functionally Gradient Composites Al2O3-Cu-Mo Obtained via Centrifugal Slip Casting

Justyna Zygmuntowicz, Hanna Winkler, Marcin Wachowski, Paulina Piotrkiewicz, Waldemar Kaszuwara

02.06.2021 | Original Research Article | Ausgabe 8/2021

Microstructure and Tensile Strength of the Bonded Interfaces and Parent Materials in W/ODS Steel Joints Fabricated by Direct SSDB

Jingwen Zhang, Dijun Long, Liming Yu, Yongchang Liu, Chenxi Liu, Zongqing Ma, Huijun Li

29.05.2021 | Original Research Article | Ausgabe 8/2021

Inverse Magnetocaloric Effect Related to the Magnetostructural Phase Transition in Quaternary Ni–Co–Mn–Al Alloy

E. Yüzüak, G. D. Yüzüak, Y. Elerman

11.06.2021 | Correction | Ausgabe 8/2021

Correction to: Long-Term Creep-Rupture Behavior of Alloy Inconel 740/740H

M. Render, M. L. Santella, X. Chen, P. F. Tortorelli, V. Cedro III

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise