Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions B

Metallurgical and Materials Transactions B 2/2014

Ausgabe 2/2014

Inhaltsverzeichnis ( 48 Artikel )

01.04.2014 | Communication | Ausgabe 2/2014

Carbon Solubility in the CaO-SiO2-3MgO-CaF2 Slag System

Jun-Yong Park, Sung-Mo Jung, Il Sohn

01.04.2014 | Communication | Ausgabe 2/2014

Evaporation Removal of Boron from Metallurgical-Grade Silicon Using CaO-CaCl2-SiO2 Slag

Ye Wang, Xiaodong Ma, Kazuki Morita

01.04.2014 | Communication | Ausgabe 2/2014

Some Thermodynamic Aspects of the Oxides of Chromium

Ayush Mittal, Galina Jelkina Albertsson, Govind Sharan Gupta, Seshadri Seetharaman, Sankaran Subramanian

01.04.2014 | Ausgabe 2/2014

On the Complexities of Microband Interactions in a Cold-Deformed Goss-Oriented Ni Single Crystal

N. Afrin, M. Z. Quadir, M. Ferry

01.04.2014 | Ausgabe 2/2014

Manufacturing of Aluminum Matrix Composites Reinforced with Iron Oxide (Fe3O4) Nanoparticles: Microstructural and Mechanical Properties

Emin Bayraktar, Fayza Ayari, Ming Jen Tan, Ayse Tosun-Bayraktar, Dhurata Katundi

01.04.2014 | Ausgabe 2/2014

Thixoforming A356 Aluminum Bipolar Plates at High Solid Fractions

Amir Bolouri, Chang Hyun Jang, Chung Gil Kang

01.04.2014 | Ausgabe 2/2014

Influence of Isothermal Treatment on MnS and Hot Ductility in Low Carbon, Low Mn Steels

Kristin R. Carpenter, Chris R. Killmore, Rian Dippenaar

01.04.2014 | Ausgabe 2/2014

Corrosion Behavior of High Nitrogen Nickel-Free Fe-16Cr-Mn-Mo-N Stainless Steels

K. L. Chao, H. Y. Liao, J. J. Shyue, S. S. Lian

01.04.2014 | Ausgabe 2/2014

Hydraulics and Mathematics Simulation on the Weir and Gas Curtain in Tundish of Ultrathick Slab Continuous Casting

Dengfu Chen, Xin Xie, Mujun Long, Min Zhang, Leilei Zhang, Qi Liao

01.04.2014 | Ausgabe 2/2014

Microstructural Evolution and Mechanical Property of AA5050 Alloy Deformed by Accumulative Roll Bonding

Kuiyu Cheng, Cheng Lu, Kiet Tieu, Hongtao Zhu

01.04.2014 | Ausgabe 2/2014

Abnormal Ductility Increase of Commercial Purity Al During Accumulative Roll Bonding

Kuiyu Cheng, Cheng Lu, Kiet Tieu

01.04.2014 | Ausgabe 2/2014

Austenite Grain Growth and the Surface Quality of Continuously Cast Steel

Rian Dippenaar, Christian Bernhard, Siegfried Schider, Gerhard Wieser

01.04.2014 | Ausgabe 2/2014

Research on Microstructure and Properties of Aged 7050T451 Aluminum Alloy

Pengtao Gai, Xia Huang, Yuansong Zeng, Mingtao Wang

01.04.2014 | Ausgabe 2/2014

Casting of High-Aluminum-Content Mg Alloys Strip by a Horizontal Twin-Roll Caster

Hideto Harada, Shinichi Nishida, Endo Masaki, Hisaki Watari

01.04.2014 | Ausgabe 2/2014

MicroNiobium Alloy Approach in Medium and High Carbon Steel Bar, Plate and Sheet Products

Steven G. Jansto

01.04.2014 | Ausgabe 2/2014

Comparative Study on Failure Prediction in Warm Forming Processes of Mg Alloy Sheet by the FEM and Ductile Fracture Criteria

Sang-Woo Kim, Young-Seon Lee

01.04.2014 | Ausgabe 2/2014

Unnotched Charpy Impact Energy Transition Behavior of Austempered Engineering Grade Ductile Iron Castings

Sukru Ergin Kisakurek, Ahmet Ozel

01.04.2014 | Ausgabe 2/2014

Modeling of Species Transport and Macrosegregation in Heavy Steel Ingots

Wensheng Li, Houfa Shen, Xiong Zhang, Baicheng Liu

01.04.2014 | Ausgabe 2/2014

Reduction of Residual Stress and Improvement of Dimensional Accuracy by Uphill Quenching for Al6061 Tube

Hak-Jin Lim, Dae-Hoon Ko, Dae-Cheol Ko, Byung-Min Kim

01.04.2014 | Ausgabe 2/2014

A Novel High-throughput Technique for Establishing the Solidification-Microstructure Relationships

Srdjan Milenkovic, Mehdi Rahimian, Ilchat Sabirov

01.04.2014 | Ausgabe 2/2014

Mechanical and Thermal Properties of Pulsed Electric Current Sintered (PECS) Cu-Diamond Compacts

Riina Ritasalo, Ulla Kanerva, Yanling Ge, Simo-Pekka Hannula

01.04.2014 | Ausgabe 2/2014 Open Access

From High Accuracy to High Efficiency in Simulations of Processing of Dual-Phase Steels

L. Rauch, R. Kuziak, M. Pietrzyk

01.04.2014 | Ausgabe 2/2014

Mechanical and Microstructural Characterization of Aluminum 6061 Processed by Plane Stress Local Torsion

Amir Hossein Shamdani, Shahin Khoddam

01.04.2014 | Ausgabe 2/2014

Microstructure and Mechanical Properties of AA5005/AA6061 Laminated Composite Processed by Accumulative Roll Bonding

Lihong Su, Cheng Lu, Guanyu Deng, Kiet Tieu

01.04.2014 | Ausgabe 2/2014

Microstructural Evolution in Multiway Loading-Forming Process of AISI 5140 Steel Triple Valve Body

Zhichao Sun, He Yang

01.04.2014 | Ausgabe 2/2014

Observations on the Zirconium Hydride Precipitation and Distribution in Zircaloy-4

Zhiyang Wang, Ulf Garbe, Huijun Li, Robert P. Harrison, Anders Kaestner, Eberhard Lehmann

01.04.2014 | Ausgabe 2/2014

Study on Mold Slag with High Al2O3 Content for High Aluminum Steel

Qiang Wang, Min Sun, Shengtao Qiu, Zhiling Tian, Guoling Zhu, Longmei Wang, Pei Zhao

01.04.2014 | Ausgabe 2/2014

Phase Selection in a Laser Surface Melted Zr-Cu-Ni-Al-Nb Alloy

Brian A. Welk, Hamish L. Fraser, Vikas Dixit, Tim Williams, Mark A. Gibson

01.04.2014 | Ausgabe 2/2014

Multiscale Modeling and Simulation of Directional Solidification Process of Turbine Blade Casting with MCA Method

Qingyan Xu, Hang Zhang, Xiang Qi, Baicheng Liu

01.04.2014 | Ausgabe 2/2014

Determination of the Optimum Conditions for Leaching of Zinc Cathode Melting Furnace Slag in Ammonium Chloride Media

Bahram Behnajady, Amin Babaeidehkordi, Javad Moghaddam

01.04.2014 | Ausgabe 2/2014

Thermodynamic Analysis of the Cu-As-S-(O) System Relevant to Sulfuric Acid Baking of Enargite at 473 K (200 °C)

M. SADEGH SAFARZADEH, JAN D. MILLER, HSIN H. HUANG

01.04.2014 | Ausgabe 2/2014

Reduction of Molten Copper Slags with Mixed CO-CH4-Ar Gas

Zhang Huaiwei, Shi Xiaoyan, Zhang Bo, Hong Xin

01.04.2014 | Ausgabe 2/2014

A Study on the Copper Recovery from the Slag of the Outokumpu Direct-to-Copper Process

Marian Kucharski, Tomasz Sak, Piotr Madej, Maciej Wędrychowicz, Wiesław Mróz

01.04.2014 | Ausgabe 2/2014

The Evolution of Structural Order as a Measure of Thermal History of Coke in the Blast Furnace

Maria Lundgren, Rita Khanna, Lena Sundqvist Ökvist, Veena Sahajwalla, Bo Björkman

01.04.2014 | Ausgabe 2/2014

Utilization of Coke Oven Gas and Converter Gas in the Direct Reduction of Lump Iron Ore

Elsayed Abdelhady Mousa, Alexander Babich, Dieter Senk

01.04.2014 | Ausgabe 2/2014

Oxidative Removal of Boron from Molten Silicon by CaO-based Flux Treatment with Oxygen Gas Injection

Mitsuru Tanahashi, Toshiharu Fujisawa, Chikabumi Yamauchi

01.04.2014 | Ausgabe 2/2014

Effect of Na2O and B2O3 on the Crystallization Behavior of Low Fluorine Mold Fluxes for Casting Medium Carbon Steels

Juan Wei, Wanlin Wang, Lejun Zhou, Daoyuan Huang, Huan Zhao, Fanjun Ma

01.04.2014 | Ausgabe 2/2014

Fluidized Bed Selective Oxidation-Sulfation Roasting of Nickel Sulfide Concentrate: Part I. Oxidation Roasting

Dawei Yu, Torstein A. Utigard, Mansoor Barati

01.04.2014 | Ausgabe 2/2014

Fluidized Bed Selective Oxidation-Sulfation Roasting of Nickel Sulfide Concentrate: Part II. Sulfation Roasting

Dawei Yu, Torstein A. Utigard, Mansoor Barati

01.04.2014 | Ausgabe 2/2014

Transient Asymmetric Flow and Bubble Transport Inside a Slab Continuous-Casting Mold

Zhongqiu Liu, Baokuan Li, Maofa Jiang

01.04.2014 | Ausgabe 2/2014

A Structurally Based Viscosity Model for Oxide Melts

Guo-Hua Zhang, Kuo-Chih Chou, Ken Mills

01.04.2014 | Ausgabe 2/2014

Nodule Evolution of Ductile Cast Iron During Solidification

S. C. Murcia, E. A. Ossa, D. J. Celentano

01.04.2014 | Ausgabe 2/2014

A Three-Dimensional Cellular Automata Model for Dendrite Growth with Various Crystallographic Orientations During Solidification

Yan Zhao, Dengfu Chen, Mujun Long, Tansel T. Arif, Rongshan Qin

01.04.2014 | Ausgabe 2/2014

Compositional Fragmentation Model for the Oxidation of Sulfide Particles in a Flash Reactor

Víctor Roberto Parra-Sánchez, Manuel Pérez-Tello, Cirilo Andrés Duarte-Ruiz, Hong Yong Sohn

01.04.2014 | Ausgabe 2/2014

Removal of Lead Hydroxides Complexes from Solutions Formed in Silver/Gold: Cyanidation Process

José R. Parga, Raul Flores Martinez, Hector Moreno, Andrew Jewel Gomes, David L. Cocke

01.04.2014 | Ausgabe 2/2014

Removal of Vanadium from Molten Aluminum-Part I. Analysis of VB2 Formation

Abdul Khaliq, Muhammad Akbar Rhamdhani, Geoffrey A. Brooks, John F. Grandfield

01.04.2014 | Ausgabe 2/2014

Removal of Vanadium from Molten Aluminum—Part II. Kinetic Analysis and Mechanism of VB2 Formation

Abdul Khaliq, Muhammad Akbar Rhamdhani, Geoffrey A. Brooks, John F. Grandfield

01.04.2014 | Ausgabe 2/2014

Removal of Vanadium from Molten Aluminum—Part III. Analysis of Industrial Boron Treatment Practice

Abdul Khaliq, Muhammad Akbar Rhamdhani, Geoffrey A. Brooks, John Grandfield

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise