Skip to main content


Metallurgical and Materials Transactions B

Metallurgical and Materials Transactions B 6/2016

Ausgabe 6/2016

Inhaltsverzeichnis ( 43 Artikel )

26.10.2016 | Editorial | Ausgabe 6/2016


David Laughlin

13.09.2016 | 2016 TMS EPD Distinguished Lecture Award | Ausgabe 6/2016

Digitalizing the Circular Economy

Circular Economy Engineering Defined by the Metallurgical Internet of Things
Markus A. Reuter

26.09.2016 | Communication | Ausgabe 6/2016 Open Access

Chemically Induced Solidification: A New Way to Produce Thin Solid-Near-Net Shapes

Carl Slater, Stephen Spooner, Claire Davis, Seetharaman Sridhar

19.08.2016 | Communication | Ausgabe 6/2016

Effect of Physicochemical Properties of Slag and Flux on the Removal Rate of Oxide Inclusion from Molten Steel

Jun Seok Park, Joo Hyun Park

22.08.2016 | Communication | Ausgabe 6/2016

Effect of a Transverse Magnetic Field on Stray Grain Formation of Ni-Based Single Crystal Superalloy During Directional Solidification

Weidong Xuan, Huan Liu, Jian Lan, Chuanjun Li, Yunbo Zhong, Xi Li, Guanghui Cao, Zhongming Ren

06.09.2016 | Communication | Ausgabe 6/2016

Stabilization of Free Lime in BOF Slag by Melting and Solidification in Air

Chunwei Liu, Muxing Guo, Lieven Pandelaers, Bart Blanpain, Shuigen Huang

07.09.2016 | Letter to the Editor | Ausgabe 6/2016

Regarding "Sulfide Capacity in Ladle Slag at Steelmaking Temperatures," C. Allertz, Du Sichen; MMTB 2015 December

Arthur Pelton, Youn-Bae Kang

02.09.2016 | Foreword | Ausgabe 6/2016

Advances in Materials Manufacturing II

Xinjin Cao, Kumar Sadayappan, X.-Grant Chen

14.01.2016 | Ausgabe 6/2016

Post-weld Tempered Microstructure and Mechanical Properties of Hybrid Laser-Arc Welded Cast Martensitic Stainless Steel CA6NM

Fatemeh Mirakhorli, Xinjin Cao, Xuan-Tan Pham, Priti Wanjara, Jean-Luc Fihey

23.03.2016 | Ausgabe 6/2016

Amorphous Phase Formation Analysis of Rapidly Solidified CoCr Droplets

Abdoul-Aziz Bogno, Carlos Riveros, Hani Henein, Delin Li

29.02.2016 | Ausgabe 6/2016

A Modified Cast-on Method for the Reinforcement of Aluminum Castings with Dissimilar Metals

Qingyou Han

25.04.2016 | Ausgabe 6/2016

Formation of Inclusions in Ti-Stabilized 17Cr Austenitic Stainless Steel

Xue Yin, Yanhui Sun, Yindong Yang, Xuefeng Bai, Mansoor Barati, Alex Mclean

30.12.2015 | Ausgabe 6/2016

The Interface of TiB2 and Al3Ti in Molten Aluminum

Xiaoming Wang, Jie Song, Wei Vian, Haibin Ma, Qingyou Han

29.12.2015 | Ausgabe 6/2016

Evolution of Intermetallics, Dispersoids, and Elevated Temperature Properties at Various Fe Contents in Al-Mn-Mg 3004 Alloys

K. Liu, X.-G. Chen

29.08.2016 | Ausgabe 6/2016

Evolution of the Spectral Emissivity and Phase Transformations of the Al-Si Coating on Usibor® 1500P Steel During Austenitization

Cangji Shi, Kyle J. Daun, Mary A. Wells

07.03.2016 | Ausgabe 6/2016

Selective Laser Treatment on Cold-Sprayed Titanium Coatings: Numerical Modeling and Experimental Analysis

Pierpaolo Carlone, Antonello Astarita, Felice Rubino, Nicola Pasquino, Paolo Aprea

30.12.2015 | Ausgabe 6/2016

Microstructure and Texture Evolution in a Yttrium-Containing ZM31 Alloy: Effect of Pre- and Post-deformation Annealing

N. Tahreen, D. F. Zhang, F. S. Pan, X. Q. Jiang, D. Y. Li, D. L. Chen

24.02.2016 | Ausgabe 6/2016

Texture Evaluation of a Bi-Modal Structure During Static Recrystallization of Hot-Deformed Mg-Al-Sn Alloy

Abu Syed Humaun Kabir, Jing Su, Stephen Yue

31.12.2015 | Ausgabe 6/2016

Mechanical Properties of Mg-Gd and Mg-Y Solid Solutions

Anna Kula, Xiaohui Jia, Raj K. Mishra, Marek Niewczas

07.10.2016 | Ausgabe 6/2016

Development of Low-Fluoride Slag for Electroslag Remelting: Role of Li2O on the Viscosity and Structure of the Slag

Cheng-Bin Shi, Seung-Ho Shin, Ding-Li Zheng, Jung-Wook Cho, Jing Li

09.08.2016 | Ausgabe 6/2016

Modeling of Droplet Generation in a Top Blowing Steelmaking Process

Bapin Kumar Rout, Geoff Brooks, Subagyo, M. Akbar Rhamdhani, Zushu Li

17.08.2016 | Technical Publication | Ausgabe 6/2016

Bubble Formation at a Submerged Orifice in High-Speed Horizontal Oscillation

Ningzhen Wang, Xiang Chen, Jianyu Yuan, Guiquan Wang, Yanxiang Li, Huawei Zhang, Yuan Liu

25.08.2016 | Ausgabe 6/2016

In SituObservation of MgO Inclusions in Liquid Iron-Aluminum Alloys

Haoyuan Mu PhD Student, Tongsheng Zhang Postdoctoral Researcher, Liang Yang Exchange-Program Student, Rodrigo R. Xavier Exchange-Program Student, Undergraduate Student, Richard J. Fruehan Professor, Bryan A. Webler Assistant Professor

23.08.2016 | Ausgabe 6/2016

Comparison of CFD Simulations with Experimental Measurements of Nozzle Clogging in Continuous Casting of Steels

Mahdi Mohammadi-Ghaleni, Mohsen Asle Zaeem, Jeffrey D. Smith, Ronald O’Malley

29.08.2016 | Ausgabe 6/2016

Electrochemical Deoxidation of Titanium and Its Alloy Using Molten Magnesium Chloride

Yu-ki Taninouchi, Yuki Hamanaka, Toru H. Okabe

23.08.2016 | Ausgabe 6/2016

A Novel Process to Synthesize High-Quality Ferrovanadium Nitride

Yue-Dong Wu, Guo-Hua Zhang, Kuo-Chih Chou

30.08.2016 | Ausgabe 6/2016

Experimental Determination of the Liquidus Surface of the Cu-O-ZnO-CaO System in Equilibrium with Air

Longgong Xia, Zhihong Liu, Pekka Taskinen

07.09.2016 | Ausgabe 6/2016

Investigation of High-Temperature Slag/Copper/Spinel Interactions

Evelien De Wilde, Inge Bellemans, Mieke Campforts, Muxing Guo, Bart Blanpain, Nele Moelans, Kim Verbeken

20.09.2016 | Technical Publication | Ausgabe 6/2016

Removal of Inclusions from Molten Aluminum by Supergravity Filtration

Gaoyang Song, Bo Song, Zhanbing Yang, Yuhou Yang, Jing Zhang

17.08.2016 | Ausgabe 6/2016

Solidification Structure and Macrosegregation of Billet Continuous Casting Process with Dual Electromagnetic Stirrings in Mold and Final Stage of Solidification: A Numerical Study

D. Jiang, M. Zhu

07.09.2016 | Ausgabe 6/2016 Open Access

Whisker Formation in Porosity in Al Alloys

William David Griffiths, Ahmed Elsayed, Mahmoud Ahmed El-Sayed

18.08.2016 | Technical Publication | Ausgabe 6/2016

Evaluation of the Effects of Rotary Degassing Process Variables on the Quality of A357 Aluminum Alloy Castings

M. Mostafaei, M. Ghobadi, Ghasem Eisaabadi B., Muhammet Uludağ, Murat Tiryakioğlu

15.08.2016 | Technical Publication | Ausgabe 6/2016

Flow Driven by an Archimedean Helical Permanent Magnetic Field. Part II: Transient and Modulated Flow Behaviors

Bo Wang, Xiaodong Wang, Yves Fautrelle, Jacqueline Etay, Xianzhao Na, Florin Baltaretu

23.08.2016 | Ausgabe 6/2016

Computational Fluid Dynamics Simulation of the Hydrogen Reduction of Magnetite Concentrate in a Laboratory Flash Reactor

De-Qiu Fan, H. Y. Sohn, Yousef Mohassab, Mohamed Elzohiery

06.09.2016 | Ausgabe 6/2016

Reduction of Liquid Clad Formation Due to Solid State Diffusion in Clad Brazing Sheet

Michael J. Benoit, Mark A. Whitney, Mary A. Wells, Sooky Winkler

09.08.2016 | Ausgabe 6/2016 Open Access

Study on the Kinetics of Aluminum Removal from Liquid Silicon to Slag with Mechanical Stirring

Jaewoo Lee, Jesse F. White, Kjetil Hildal, Du Sichen

15.08.2016 | Technical Publication | Ausgabe 6/2016 Open Access

Effect of Experimental Conditions on Cementite Formation During Reduction of Iron Ore Pellets

Mania Kazemi, Du Sichen

15.08.2016 | Ausgabe 6/2016

Thermodynamics and Structure of CaO-Al2O3-3 Mass Pct B2O3 Slag at 1773 K (1500 °C)

Qifeng Shu, Pengfei Li, Xiang Zhang, Kuochih Chou

06.09.2016 | Ausgabe 6/2016

Combustion Methods for Measuring Low Levels of Carbon in Nickel, Copper, Silver, and Gold

Nathan S. Jacobson, Kayvon Savadkouei, Christophe Morin, Jo Fenstad, Evan H. Copland

12.08.2016 | Ausgabe 6/2016

A Mathematical Model for the Reduction Stage of the CAS-OB Process

Petri Sulasalmi, Ville-Valtteri Visuri, Aki Kärnä, Mika Järvinen, Seppo Ollila, Timo Fabritius

09.08.2016 | Technical Publication | Ausgabe 6/2016

Fundamental Research on a New Process to Remove Al3+ as Potassium Alum during Lithium Extraction from Lepidolite

Hui Guo, Ge Kuang, Jing-Xi Yang, Song Hu

23.08.2016 | Ausgabe 6/2016

X-ray Microprobe Investigation of Iron During a Simulated Silicon Feedstock Extraction Process

Sarah Bernardis, Sirine C. Fakra, Elena Dal Martello, Rune B. Larsen, Bonna K. Newman, David P. Fenning, Marisa Di Sabatino, Tonio Buonassisi

12.10.2016 | Ausgabe 6/2016

Study of Single-Power, Two-Circuit ESR Process with Current-Carrying Mold: Development of the Technique and Its Physical Simulation

Yanwu Dong, Zhouhua Jiang, Haibo Cao, Zhiwen Hou, Kean Yao

Aktuelle Ausgaben

Premium Partner


    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.