Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions B

Metallurgical and Materials Transactions B 6/2018

Ausgabe 6/2018

Inhaltsverzeichnis ( 60 Artikel )

05.09.2018 | Communication | Ausgabe 6/2018

Mechanism of Desulfurization from Liquid Iron by Hydrogen Plasma Arc Melting

Xiliang Guo, Jianbo Yu, Yujia Zhang, Xia Li, Jiang Wang, Hanlin Liao, Zhongming Ren

06.09.2018 | Communication | Ausgabe 6/2018

Graphitization Behavior of Coke in the Cohesive Zone

Zhi Yu Chang, Kexin Jiao, Jianliang Zhang

30.08.2018 | Communication | Ausgabe 6/2018

A Mathematical Model for Prediction of Carbon Concentration During RH Refining Process

Haitao Ling, Lifeng Zhang

06.09.2018 | Communication | Ausgabe 6/2018

On the Tensile Properties of Inconel 718 Fabricated by EBM for As-Built and Heat-Treated Components

Laith Abdullah Al-Juboori, Thomas Niendorf, Florian Brenne

19.09.2018 | Ausgabe 6/2018

Thermodynamics on the Bi-Fe-Ti System and the Gibbs Energy of Bi9Ti8

Akihiro Kishimoto, Tetsuya Uda

21.08.2018 | Ausgabe 6/2018

Engulfment Behavior of Inclusions in High-Carbon Steel: Theoretical and Experimental Investigation

Yasuhiro Tanaka, Farshid Pahlevani, Karen Privat, Suk-Chun Moon, Rian Dippenaar, Shin-ya Kitamura, Veena Sahajwalla

30.08.2018 | Ausgabe 6/2018

Mechanisms of Hydrogen-Assisted Magnesiothermic Reduction of TiO2

Hyrum Lefler, Z. Zak Fang, Ying Zhang, Pei Sun, Yang Xia

08.10.2018 | Ausgabe 6/2018

Effect of Partial Substitution of Mn for Ni on Mechanical Properties of Friction Stir Processed Hypoeutectic Al-Ni Alloys

Fatemeh Yousefi, Reza Taghiabadi, Saeid Baghshahi

17.10.2018 | Ausgabe 6/2018

Nonisothermal Crystallization Kinetics of Glassy Mold Fluxes

Lejun Zhou, Huan Li, Wanlin Wang, Jiang Chang

15.10.2018 | Ausgabe 6/2018

Mechanical Properties, Microstructural Evolution, and the Effect of Friction on the Plastic Flow of the AISI 321 Austenitic Stainless Steel Tube During Cold Pilgering: An Experimental and Simulation Analysis

Mohamad Hosein Musazadeh, Reza Vafaei, Ehsan Mohammad Sharifi, Khosro Farmanesh

16.10.2018 | Ausgabe 6/2018

Processing Techniques for ODS Stainless Steels

Chen Dai, Christopher Schade, Diran Apelian, Enrique J. Lavernia

01.08.2018 | Ausgabe 6/2018

Inclusion Characterization in Aluminum-Deoxidized Special Steel with Certain Sulfur Content Under Combined Influences of Slag Refining, Calcium Treatment, and Reoxidation

Ze-Wang Hou, Min Jiang, En-Jiao Yang, Sheng-Ya Gao, Xin-Hua Wang

01.08.2018 | Ausgabe 6/2018

Kinetics of Reduction of Low-Grade Nickel Laterite Ore Using Carbon Monoxide

Bo Li, Zhiguang Ding, Yonggang Wei, Hua Wang, Yindong Yang, Mansoor Barati

07.08.2018 | Ausgabe 6/2018

Development of Kinetic Model for Reactions Between Cu-Containing Multicomponent Slag and Liquid Sulfide Using Coupled Reaction Model

Seung-Hwan Shin, Sun-joong Kim

09.08.2018 | Ausgabe 6/2018

Effect of Iron Phase Evolution on Copper Separation from Slag Via Coal-Based Reduction

Shiwei Zhou, Yonggang Wei, Bo Li, Hua Wang

06.08.2018 | Ausgabe 6/2018

Effect of MgO on Crystallization and Heat Transfer of Fluoride-Free Mold Fluxes

Jian Yang, Jianqiang Zhang, Yasushi Sasaki, Oleg Ostrovski, Chen Zhang, Dexiang Cai, Yoshiaki Kashiwaya

31.08.2018 | Ausgabe 6/2018

Thermodynamic Analysis of Deoxidation of Titanium Through the Formation of Rare-Earth Oxyfluorides

Toru H. Okabe, Yu-ki Taninouchi, Chenyi Zheng

24.08.2018 | Ausgabe 6/2018

Efficient Recovery of Copper and Cobalt from the Matte–Slag Mixture of ISA Furnace by Injection of Coke and Pyrite

Xu Yang, Jialiang Zhang, Jiankun Zhang, Juntao Hu, Jiangtao Li, Lifeng Zhang, Yongqiang Chen, Chengyan Wang

07.09.2018 | Ausgabe 6/2018

Effects of FeO and CaO/Al2O3 Ratio in Slag on the Cleanliness of Al-Killed Steel

Yunqing Ji, Chunyang Liu, Yan Lu, Huixiang Yu, Fuxiang Huang, Xinhua Wang

07.09.2018 | Ausgabe 6/2018

In Situ Observation of the Precipitation, Aggregation, and Dissolution Behaviors of TiN Inclusion on the Surface of Liquid GCr15 Bearing Steel

Qianren Tian, Guocheng Wang, Deli Shang, Hong Lei, Xinghu Yuan, Qi Wang, Jing Li

18.09.2018 | Ausgabe 6/2018 Open Access

Silicon Carbide Formation Enhanced by In-Situ-Formed Silicon Nitride: An Approach to Capture Thermal Energy of CO-Rich Off-Gas Combustion

S. P. du Preez, J. P. Beukes, P. G. van Zyl, M. Tangstad, L. R. Tiedt

12.10.2018 | Ausgabe 6/2018 Open Access

Lime Dissolution in Foaming BOF Slag

Johan Martinsson, Björn Glaser, Du Sichen

15.10.2018 | Ausgabe 6/2018

Kinetics Analysis of Boron Removal from Silicon through Reactions with CaO-SiO2 and CaO-SiO2-Al2O3 Slags

M. S. Islam, M. A. Rhamdhani

22.08.2018 | Ausgabe 6/2018

Entrapment of Inclusions by Solidified Hooks at the Subsurface of Ultra-Low-Carbon Steel Slab

Xubin Zhang, Ying Ren, Lifeng Zhang, Wen Yang

03.08.2018 | Ausgabe 6/2018

Solidification Behavior of Calcium Ferrite Under Ultrasonic Vibration

Ruirui Wei, Xuewei Lv, Mingrui Yang, Jian Xu, Zhixiong You

06.08.2018 | Ausgabe 6/2018

Cell-to-Dendrite Transition Induced by a Static Transverse Magnetic Field During Lasering Remelting of the Nickel-Based Superalloy

Xiaoqi Liu, Jianbo Yu, Sansan Shuai, Weidong Xuan, Jiang Wang, Zhongming Ren

29.08.2018 | Ausgabe 6/2018

Thermomechanical Processing of Metal Feedstock for Semisolid Forming: A Review

Frank Czerwinski

24.08.2018 | Ausgabe 6/2018

Microsegregation Measurement: Methods and Applications

Richard Smith

31.08.2018 | Ausgabe 6/2018

Effects of Inclusion Precipitation, Partition Coefficient, and Phase Transition on Microsegregation for High-Sulfur Steel Solidification

Lintao Gui, Mujun Long, Yunwei Huang, Dengfu Chen, Huabiao Chen, Huamei Duan, Sheng Yu

17.09.2018 | Ausgabe 6/2018

Influence of Growth Rate on Eutectic Spacing, Microhardness, and Ultimate Tensile Strength in the Directionally Solidified Al-Cu-Ni Eutectic Alloy

Ümit Bayram, Necmettin Maraşlı

03.10.2018 | Ausgabe 6/2018

Prediction of Cooling Curves for Controlled Unidirectional Solidification Under the Influence of Shrinkage: A Semi-analytical Approach

Aniket D. Monde, Prodyut R. Chakraborty

01.08.2018 | Ausgabe 6/2018

Fluid–Solid Coupling Simulation on the Temperature Distribution of Tuyere Used for Oxygen Bottom Blowing Converter

Shaoyan Hu, Rong Zhu, Runzao Liu, Kai Dong, Zhihui Li

17.08.2018 | Ausgabe 6/2018

Passivation Threshold for the Oxidation of Liquid Silicon and Thermodynamic Non-equilibrium in the Gas Phase

Mathieu Vadon, Øyvind Sortland, Merete Tangstad, Guy Chichignoud, Yves Delannoy

21.08.2018 | Ausgabe 6/2018

Understanding of Void Formation in Cu/Sn-Sn/Cu System During Transient Liquid Phase Bonding Process Through Diffusion Modeling

Sylvie Bordère, Emilien Feuillet, Jean-Luc Diot, Renaud de Langlade, Jean-François Silvain

25.09.2018 | Ausgabe 6/2018

Self-diffusion Measurements of Liquid Sn Using the Shear Cell Technique and Stable Density Layering

Masato Shiinoki, Nao Hashimoto, Hideto Fukuda, Yuki Ando, Shinsuke Suzuki

12.09.2018 | Ausgabe 6/2018

Thermodynamic and Structural Study of the Copper-Aluminum System by the Electrochemical Method Using a Copper-Selective Beta″ Alumina Membrane

Caspar Stinn, Antoine Allanore

06.09.2018 | Ausgabe 6/2018

Effect of Direct Reduced Iron (DRI) on Dephosphorization of Molten Steel by Electric Arc Furnace Slag

Jung Ho Heo, Joo Hyun Park

05.09.2018 | Ausgabe 6/2018

Evolution of Oxide–Sulfide Complex Inclusions and Its Correlation with Steel Cleanliness During Electroslag Rapid Remelting (ESRR) of Tool Steel

Chengbin Shi, Dingli Zheng, Baoshan Guo, Jing Li, Fang Jiang

06.09.2018 | Ausgabe 6/2018

Initial Reactions at the Electrodes of the FFC-Cambridge Process in Molten CaCl2 to Produce Ti

Pingsheng Lai, Meilong Hu, Zhengfeng Qu, Leizhang Gao, Chenguang Bai, Tianxiong Wang, Shengfu Zhang, Guibao Qiu

10.09.2018 | Ausgabe 6/2018

Simultaneous Removal of Silicon and Iron-Rich Phases from Coarse Al-Si Alloys Using Manganese Under Electromagnetic Field

Yu Bao, Guoqiang Lv, Yibo Wang, Ting Xiao, Yunfei He, Yufeng Zhang, Yun Lei, Wenhui Ma

05.10.2018 | Ausgabe 6/2018

Ni0.36Al0.10Cu0.30Fe0.24 Metallic Inert Anode for the Electrochemical Production of Fe-Ni Alloy in Molten K2CO3-Na2CO3

Donghua Tian, Mingyong Wang, Yanping Zhou, Handong Jiao, Xuefeng She, Jiusan Xiao, Shuqiang Jiao

23.08.2018 | Ausgabe 6/2018

Dissolution Behavior of Iron and Steel Materials in Liquid Magnesium

Yu-ki Taninouchi, Katsuhiro Nose, Toru H. Okabe

16.08.2018 | Ausgabe 6/2018

Effects of Copper Content and Mold Temperature on the Hot Tearing Susceptibility of Mg-7Zn-xCu-0.6Zr Alloys

Ye Zhou, Pingli Mao, Zhi Wang, Yizhou Li, Zheng Liu, Feng Wang

19.09.2018 | Ausgabe 6/2018

Removal of Bifilms from Al Melts by Stirring in Unbaffled and Baffled Crucibles

Hamed Bagherpour-Torghabeh, Ramin Raiszadeh, Hamid Doostmohammadi

20.09.2018 | Ausgabe 6/2018

Characteristics of the Hot Workability of an AZ91D Magnesium Alloy Using 3D Processing Maps

Yan Xu, Chen Chen, Jianbo Jia, Xuxing Zhang, Haohao Dai, Zhenhua Bai

07.08.2018 | Ausgabe 6/2018 Open Access

Damring Formation During Rotary Kiln Chromite Pre-reduction: Effects of Pulverized Carbonaceous Fuel Selection and Partial Pellet Melting

Y. van Staden, J. P. Beukes, P. G. van Zyl, E. Ringdalen, M. Tangstad, E. L. J. Kleynhans, J. R. Bunt

21.08.2018 | Ausgabe 6/2018

Thermodynamic Properties of Magnesium-Boron Binary Alloys Determined Using Solid-State Electrochemical Measurements

Muhammad A. Imam, Ramana G. Reddy

04.10.2018 | Ausgabe 6/2018

Mechanism of Low-Temperature Reduction Degradation of Alumina-Containing Hematite Solid Solution Below 550 °C

Hui Guo, Xing-Min Guo

21.08.2018 | Ausgabe 6/2018

Reaction Behaviors of Al-Killed Medium-Manganese Steel with Glazed MgO Refractory

Lingzhong Kong, Zhiyin Deng, Liu Cheng, Miaoyong Zhu

17.09.2018 | Ausgabe 6/2018

Transient Behavior and Thermodynamics of Inclusions in Al-Ti-Deoxidized and Ca-Treated Steel

Tongsheng Zhang, Yandong Li, Chengjun Liu, Maofa Jiang

21.09.2018 | Ausgabe 6/2018

Research on Selective Oxidation of Carbon and Aluminum with Introduction of CO2 in RH Refining of Low-Carbon Steel Process

Baochen Han, Rong Zhu, Yiqiang Zhu, Runzao Liu, Wenhe Wu, Qiang Li, Guangsheng Wei

06.09.2018 | Ausgabe 6/2018

Enrichment of Niobium and Titanium from Kaolin Using an Acid–Alkali Leaching Process

Ning Wang, Hannian Gu, Hanjie Wen, Shirong Liu

07.08.2018 | Ausgabe 6/2018

The Effect of Arc Current on Microstructure and Mechanical Properties of Hybrid LasTIG Welds of High-Strength Low-Alloy Steels

Hana Šebestová, Petr Horník, Libor Mrňa, Pavel Doležal, Eliška Mikmeková

15.08.2018 | Ausgabe 6/2018

Preparation of Vanadium Nitride by Magnesiothermic Reduction of V2O3 in Nitrogen Atmosphere

Yue-Dong Wu, Guo-Hua Zhang, Kuo-Chih Chou

10.09.2018 | Ausgabe 6/2018

The Binary Alkali Nitrate and Chloride Phase Diagrams: NaNO3-KNO3, LiNO3-NaNO3, LiNO3-KNO3, and NaCl-KCl

Mehedi Bin Mohammad, Peter Cadusch, Geoffrey Alan Brooks, M. Akbar Rhamdhani

01.08.2018 | Ausgabe 6/2018

Effects of Particle Diameter and Coke Layer Thickness on Solid Flow and Stress Distribution in BF by 3D Discrete Element Method

Dereje Degefa Geleta, Joonho Lee

26.09.2018 | Ausgabe 6/2018

A Phase-Field Lattice-Boltzmann Study on Dendritic Growth of Al-Cu Alloy Under Convection

Ang Zhang, Jinglian Du, Zhipeng Guo, Qigui Wang, Shoumei Xiong

15.09.2010 | Ausgabe 6/2018

A Commentary on: “Reaction Kinetics in Processes of Nucleation and Growth”*

Katayun Barmak

21.09.2018 | Correction | Ausgabe 6/2018

Correction to: Mathematical Analysis of the Solidification Behavior of Plain Steel Based on Solute- and Heat-Transfer Equations in the Liquid–Solid Zone

Toshio Fujimura, Kunimasa Takeshita, Ryosuke O. Suzuki

29.05.2013 | Ausgabe 6/2018

RETRACTED ARTICLE: Fabrication of Lotus-Type Porous Al-Si Alloys Using Thermal Decomposition Method Combined with Mold Casting and Continuous Casting Techniques

Tae Bum Kim, Taek Kyun Jung, Yong Hwan Kim, Taek Soo Kim, Soong Keun Hyun

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise