Metallurgist 1-2/2012

01.05.2012

Development of a low-waste technology for processing sulfide gold-antimony concentrates

A. V. Kanarskii, E. V. Adamov

01.05.2012

The contribution of top dust to the danger of explosion from blast-furnace smelting

L. A. Zinoviev, E. A. Yakovlev, E. S. Mustygina, G. S. Shapinova

01.05.2012

System for controlling the temperature regime of an arc steelmaking furnace operated with the continuous charging of metallized pellets and foaming of the furnace slag

A. A. Kozhukhov, A. S. Tkachev, V. Ryabinin

01.05.2012

Production of forging ingots without axial shrinkage defects. Part I*

V. V. Nazaratin, L. I. Berman, M. V. Efimov, A. A. Selyutin, P. M. Yavtushenko, V. G. Zinchenko

01.05.2012

Effect of thermal fatigue cracks on brittle-ductile deformation and failure of cbcm roller surface layers

P. O. Maruschak, I. V. Konovalenko, R. T. Bishchak

01.05.2012

Dependence of the surface deformation of strip on the parameters of its shaping

I. P. Manzhurin, E. A. Sidorina

01.05.2012

Effect of ferrite-bainite structure on the properties of high-strength pipe steel

M. A. Smirnov, I. Yu. Pyshmintsev, A. N. Maltseva, O. V. Mushina

01.05.2012

Relationship of failure energy and amount of ductile component in a fracture during the DWTT for rolled plate prepared by controlled rolling

I. F. Pemov, Yu. D. Morozov, E. A. Goli-Oglu, A. D. Lyuchkov, I. Z. Mashinson, E. N. Shebanits, D. I. Zernitskii

01.05.2012

Research and development of a nanoinoculated cast iron composition for aluminum electrolyser anode stubs

V. V. Kondratiev, A. O. Mekhnin, N. A. Ivanov, Yu. V. Bogdanov, V. A. Ershov

01.05.2012

Feasibility of using aegirine concentrate as a complex flux in copper metallurgy

I. O. Popov, Yu. A. Mitrofanov, S. M. Ustinov

01.05.2012

Improving the efficiency of the manufacture of products made from leaded brasses at the KUZOTsM

E. V. Kuzmina, L. N. Marushchak, L. M. Zheleznyak, O. V. Parshukova

01.05.2012

Mechanical and metallurgical characterization of 8090 Al–Li alloy welded joints

L. Bonaccorsi, G. Costanza, S. Missori, A. Sili, M. E. Tata

01.05.2012

Evaluating the effectiveness of using coke breeze in blast-furnace smelting

G. N. Logachov, S. N. Pishnograev, V. A. Gostenin, A. V. Chevychelov, V. P. Gridasov

01.05.2012

Solid-phase reduction of waste products from steelmaking

A. N. Dildin, V. I. Chumanov, I. V. Chumanov, V. E. Eremyashev

01.05.2012

Developing an integrated technology for the production of steel of prescribed quality at Ural Steel

A. N. Shapovalov

01.05.2012

Production of forging ingots without axial shrinkage defects. Part II

V. V. Nazaratin, L. I. Berman, M. V. Efimov, A. A. Selyutin, P. M. Yavtushenko, V. G. Zinchenko

01.05.2012

The use of modeling to develop a method for the roller drawing of tubes on a long mandrel

G. A. Orlov, E. N. Vagapov

01.05.2012

Modeling metal-shaping operations in DEFORM-3D in order to efficiently design production processes

A. P. Karamyshev, I. I. Nekrasov, V. S. Parshin, A. A. Fedulov, A. I. Pugin

01.05.2012

Production of high-strength hot-rolled steel to make energy-absorbing automotive parts

I. S. Vasiliev, M. A. Molostov, V. V. Kurban, V. V. Savenkov, P. P. Semenov, M. F. Tazov

01.05.2012

Improving the technology for the soft reduction of continuous-cast slabs made of tube steel

S. V. Prokhorov, A. S. Kazakov, V. V. Moshkunov, A. M. Stolyarov, A. A. Kulzhov

01.05.2012

Features of structure and property formation for cold-rolled low-carbon steels for automobile manufacture in relation to the degree of reduction during cold rolling

I. G. Rodionova, P. A. Mishnev, R. R. Adigamov, Yu. S. Bykova, S. V. Zhilenko, A. S. Melnichenko

01.05.2012

Effect of semifinished rolled product cooling rate during controlled rolling on the condition of microalloyed steel hot-worked austenite, final microstructure, and mechanical properties. Part 2. Study of the effect of semifinished rolled product cooling rate on ferrite-bainite structure formation*

Yu. D. Morozov, I. F. Pemov, E. A. Goli-Oglu, D. V. Nizhelsky

01.05.2012

Study of pipe steel 06GB tendency towards corrosion-fatigue failure in chloride hydrogen sulfide-containing media

E. S. Ivanov, P. P. Stepanov, Yu. V. Ryabov

01.05.2012

Study of multicomponent segregation at interfaces in high-strength skelp steel

A. I. Kovalev, D. L. Vainshtein, A. Yu. Rashkovskii, E. I. Khlusova, V. V. Orlov

Springer Professional

Inhaltsverzeichnis (24 Artikel)

Development of a low-waste technology for processing sulfide gold-antimony concentrates

The contribution of top dust to the danger of explosion from blast-furnace smelting

System for controlling the temperature regime of an arc steelmaking furnace operated with the continuous charging of metallized pellets and foaming of the furnace slag

Production of forging ingots without axial shrinkage defects. Part I*

Effect of thermal fatigue cracks on brittle-ductile deformation and failure of cbcm roller surface layers

Dependence of the surface deformation of strip on the parameters of its shaping

Effect of ferrite-bainite structure on the properties of high-strength pipe steel

Relationship of failure energy and amount of ductile component in a fracture during the DWTT for rolled plate prepared by controlled rolling

Research and development of a nanoinoculated cast iron composition for aluminum electrolyser anode stubs

Feasibility of using aegirine concentrate as a complex flux in copper metallurgy

Improving the efficiency of the manufacture of products made from leaded brasses at the KUZOTsM

Mechanical and metallurgical characterization of 8090 Al–Li alloy welded joints

Evaluating the effectiveness of using coke breeze in blast-furnace smelting

Solid-phase reduction of waste products from steelmaking

Developing an integrated technology for the production of steel of prescribed quality at Ural Steel

Production of forging ingots without axial shrinkage defects. Part II

The use of modeling to develop a method for the roller drawing of tubes on a long mandrel

Modeling metal-shaping operations in DEFORM-3D in order to efficiently design production processes

Production of high-strength hot-rolled steel to make energy-absorbing automotive parts

Improving the technology for the soft reduction of continuous-cast slabs made of tube steel

Features of structure and property formation for cold-rolled low-carbon steels for automobile manufacture in relation to the degree of reduction during cold rolling

Effect of semifinished rolled product cooling rate during controlled rolling on the condition of microalloyed steel hot-worked austenite, final microstructure, and mechanical properties. Part 2. Study of the effect of semifinished rolled product cooling rate on ferrite-bainite structure formation*

Study of pipe steel 06GB tendency towards corrosion-fatigue failure in chloride hydrogen sulfide-containing media

Study of multicomponent segregation at interfaces in high-strength skelp steel

Aktuelle Ausgaben

Ausgabe 1-2/2022

Ausgabe 11-12/2022

Ausgabe 9-10/2022

Ausgabe 7-8/2021

Ausgabe 5-6/2021

Ausgabe 3-4/2021

Ausgabe 1-2/2021

Ausgabe 11-12/2021

Ausgabe 9-10/2021

Ausgabe 7-8/2020

Premium Partner

Marktübersichten