Skip to main content
main-content

Zeitschrift

Metallurgist

Metallurgist 1-2/2017

Ausgabe 1-2/2017

Inhaltsverzeichnis ( 26 Artikel )

20.05.2017 | Ausgabe 1-2/2017

Evaluating the Thermal Efficiency of a Shaft Furnace for Roasting Siderite Ore

V. I. Matyukhin, V. V. Shatsillo, A. V. Kuznetsov, D. V. Rybakin, A. F. Krokhalev

20.05.2017 | Ausgabe 1-2/2017

Contamination of the Metal of a Large Ingot by Oxide, Sulfide, and Oxysulfide Inclusions

S. B. Gamanyuk, N. A. Zyuban, D. V. Rutskii, L. V. Palatkina

20.05.2017 | Ausgabe 1-2/2017

Effect of Casting Temperature on Continuously-Cast Bearing Steel GCr15 Billet Structure Formation

Dong Xu, Hongyi Liu, Cheng Peng, Zhipu Pei, Shan Miao, Dongying Ju, Mianoyong Zhu

20.05.2017 | Ausgabe 1-2/2017

Plasma-ARC Heating of Periclase-Carbonaceous Refractory

M. V. Krasnyanskii, Ya. L. Kats, A. S. Tyuftyaev, M. Kh. Gadzhiev, M. A. Sargsyan, D. I. Yusupov

18.05.2017 | Ausgabe 1-2/2017

Microstructural Condition Features of High-Strength Steels for Large Diameter Pipes

K. Yu. Mentyukov, A. N. Bortsov, S. Yu. Makushev, I. P. Shabalov, Yu. I. Lipunov, O. N. Sychev

19.05.2017 | Ausgabe 1-2/2017

Nature of Angular Carbides in Damascus Steel

D. A. Sukhanov, L. B. Arkhangel’skii, N. V. Plotnikova

20.05.2017 | Ausgabe 1-2/2017

Crack Resistance of High-Strength Steel and Breakage of a Gas Pipeline

A. A. Bogatov

18.05.2017 | Ausgabe 1-2/2017

Designing Schedules for the Cold Rolling of Tubes Without Intermediate Annealings

G. A. Orlov

18.05.2017 | Ausgabe 1-2/2017

Oil Absorption Capacity of the Contact Surfaces in Metal-Forming Processes

N. N. Ogarkov, S. I. Platov, E. S. Shemetova, M. N. Samodurova, D. V. Terent’ev, V. A. Nekit

19.05.2017 | Ausgabe 1-2/2017

Preparation of Bimetal with Good Damping Properties

N. L. Fedotova, I. B. Chudakov, I. A. Korms, S. Yu. Makushev, L. B. Pervukhin, I. V. Saikov, N. A. Arutyunyan

19.05.2017 | Ausgabe 1-2/2017

Set of Measures for Improving the Quality of Powders Based on Titanium for Additive Technology

V. I. Kotlyarov, E. A. Yuzhakova, V. T. Beshkarev, V. V. Ivanov, R. Yu. Kozlov

25.05.2017 | Ausgabe 1-2/2017

Solidification Conditions for High-Strength Aluminum Alloy Ingots with Increased Transition Metal Content

S. G. Bochvar, S. M. Merkulova

18.05.2017 | Ausgabe 1-2/2017

Possibility of Preparing Alloys of the Al–Si System Using Amorphous Microsilica

M. P. Kuz’min, V. V. Kondrat’ev, L. M. Larionov, M. Yu. Kuz’mina, N. N. Ivanchik

20.05.2017 | Ausgabe 1-2/2017

Effect of Deformation Heat Treatment on the Structure of Two-Phase Steel in a Bimetal Composite and its Mechanical Properties

V. G. Molyarov, A. M. Avdeenko, A. V. Kalashnikova, A. V. Molyarov, E. I. Kuz’ko

18.05.2017 | Ausgabe 1-2/2017

Simulation of Rotary Piercing Process

A. A. Bogatov, D. Sh. Nukhov, V. A. Toporov

20.05.2017 | Ausgabe 1-2/2017

Simulation of the Behavior of Pipes with Variable Wall Thickness Under Internal Pressure

G. A. Orlov, V. V. Kotov, A. G. Orlov

20.05.2017 | Ausgabe 1-2/2017

Innovative Directions for Utilization of Ferrous Metallurgy Waste in Ceramic Brick Production

M. K. Imangazin, E. S. Abdrakhimova, V. Z. Abdrakhimov, A. K. Kairakbaev

19.05.2017 | Ausgabe 1-2/2017

Use of Bakal Deposit Siderite Ore in Iron and Steel Production

A. S. Vusikhis, L. I. Leont’ev, D. Z. Kudinov

19.05.2017 | Ausgabe 1-2/2017

Features of Blast Furnace Transient Processes

O. P. Onorin, N. A. Spirin, A. S. Istomin, V. V. Lavrov, A. V. Pavlov

20.05.2017 | Ausgabe 1-2/2017

Correlation of Metallized Pellet Decarburization, Heating, and Melting in an Arc Furnace

E. E. Merker

19.05.2017 | Ausgabe 1-2/2017

Effect of Stoichiometric Reductants on the Process of Ferrochrome Production at 1200–1550°C

W. Mosoma, M. Kalenga wa Kalenga, X. Pan

20.05.2017 | Ausgabe 1-2/2017

Preparation of Manganese Powder Steels by Hot Forging Porous Workpieces in the Presence of a Liquid Phase

Yu. G. Dorofeev, V. Yu. Dorofeev, R. V. Batienkov, A. V. Skorikov, A. V. Ganshin

19.05.2017 | Ausgabe 1-2/2017

Pyrometallurgical Treatment of a Nepheline Charge Using Additives of Natural and Technogenic Origin

V. Yu. Bazhin, V. N. Brichkin, V. M. Sizyakov, M. V. Cherkasova

20.05.2017 | Ausgabe 1-2/2017

Use of Quartz-Containing Materials as Fluxes in Copper Smelting Production

E. N. Selivanov, A. M. Klyushnikov, R. I. Gulyaeva

22.05.2017 | Ausgabe 1-2/2017

Production Trial of a New Heat-Resistant Alloy with Low Density with Single-Crystal GTE Blade Casting

E. M. Visik, E. A. Tikhomirova, N. V. Petrushin, O. G. Ospennikova, V. V. Gerasimov, A. A. Zhivushkin

19.05.2017 | Ausgabe 1-2/2017

A Die Assembly for Hydrodynamic Drawing of Nichrome Strips

A. I. Snigirev, L. M. Zheleznyak, N. A. Snigirev, A. S. Burunov

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise