Metallurgist 11-12/2016

28.03.2016

Status and Prospects of Ferroalloys Production in the Russian Federation

L. I. Leont’ev, L. A. Smirnov, V. I. Zhuchkov, A. V. Zhdanov, V. Ya. Dashevskii, S. A. Gurova

28.03.2016

Computer Study of the Effect of Tooling Geometry on Deformation Parameters in the Plastic Shaping of Aluminum Wire Rod by Multi-ECAP-Conform

G. I. Raab, E. I. Fakhretdinova, R. Z. Valiev, L. P. Trifonenkov, V. F. Frolov

28.03.2016

Accounting for the Technological History of the Formation of a Part in Strength Calculations. Part 2*

V. V. Mironenko, O. E. Polyakova, D. A. Sechkarenko, V. V. Kotov

28.03.2016

Prospects for the Use of Drum-Type Units to Recycle Metallurgical Slags

B. L. Demin, Yu. V. Sorokin, E. N. Shcherbakov, E. E. Shvetsov, A. A. Derlin

28.03.2016

Liquid-Phase Reduction of Steelmaking Wastes

A. N. Dil’din, I. V. Chumanov, V. I. Chumanov, V. E. Eremyashev, E. A. Trofimov, A. A. Kirsanova

28.03.2016

Method of Monitoring the Profile of a Blast Furnace and the Results of its Use

V. I. Bol’shakov, V. V. Lebed’, A. L. Chaika, A. A. Zherebetskii

28.03.2016

Effect of Oxides of Magnesium and Manganese and the Basicity of the Iron-Ore-Bearing Materials on the Ability of the Smelting Products to Filter Through the Coke Column in Blast Furnaces

G. A. Nechkin, V. A. Kobelev, A. Yu. Chernavin, D. A. Chernavin

28.03.2016

Analysis of the Kinetics of the Solidification of Steel Forging Ingots of Different Configurations. Part I. Results from Cold Modeling

V. S. Dub, A. N. Romashkin, D. S. Tolstykh, A. N. Mal’ginov, I. A. Ivanov, G. A. Ekhvaya

28.03.2016

Modification of Steel and Alloys with Rare-Earth Elements. Part 1

L. A. Smirnov, V. A. Rovnushkin, A. S. Oryshchenko, G. Yu. Kalinin, V. G. Milyuts

28.03.2016

“Bainitic Refinement” of Machine Steels Microalloyed with Vanadium and Nitrogen

L. M. Panfilova, L. A. Smirnov

29.03.2016

Effect of Technology for Modification with Calcium and Ree on Pipe Steel Nonmetallic Inclusion Morphology and Production Properties

S. P. Burmasov, A. V. Murzin, L. E. Dresvyankina, V. A. Toporov, A. G. Gudov

28.03.2016

Effect of Mn, Al, Ni, and C Content on the Equilibrium Phase Composition of Alloys Based on the Fe–Mn–Al–Ni–C System

L. M. Kaputkina, A. G. Svyazhin, D. E. Kaputkin, V. E. Bazhenov, A. V. Bronz, I. V. Smarygina

28.03.2016

Development of Slag-Forming Mixture for Steel-Pouring Ladle and its Application Technology During Production of Steels with High Aluminum and Sulfur Content

A. N. Bozheskov, A. V. Kuklev, I. V. Lebedev, A. M. Toptygin, K. N. Anisimov

28.03.2016

Mechanisms for Improving Chemical and Structural Homogeneity of Hot-Rolled Product for Objects Prepared by Hot Stamping

A. I. Zaitsev, A. V. Koldaev, N. A. Karamysheva, I. G. Rodionova

28.03.2016

Study of the Effect of Chemical Composition and Heat Treatment on Corrosion Resistance Indices for Martensitic Class Stainless Steels Alloyed with Nitrogen

K. A. Udod, I. G. Rodionova, A. V. Knyazev, S. V. Stukalin

28.03.2016

Evaluation of the Possibility of Retarding Steel Recrystallization During Hot Rolling with Precipitation of Manganese Sulfide Particles

I. G. Rodionova, A. Yu. Kazankov, M. V. Rodionova, A. I. Kryukova

28.03.2016

Development of Steel Chemical Composition and Heat Treatment for Electrowelded Casings with Increased Strength and Cold Resistance

V. N. Zikeev, A. N. Alistaev, N. V. Peiganovich, I. V. Peiganovich, L. I. Efron

28.03.2016

Assimilation of New Steel Alloying Composition for Manufacturing Line Pipes of Strength Classes K52–K55

I. Yu. Utkin, D. P. Uskov, I. I. Frantov, A. M. Longinov, A. V. Mozgovoi, D. V. Domov

28.03.2016

Study of the Resistance of Steels 18KhMFB And 18Kh3MFB to Hot Deformation

A. V. Konovalov, A. S. Smirnov, V. S. Parshin, A. I. Dronov, A. P. Karamyshev, I. I. Nekrasov, A. A. Fedulov, A. V. Serebryakov

28.03.2016

Determination of Residual Ductility in the Forging of Bars on a Lever-Type Radial Forging Machine

A. P. Karamyshev, I. I. Nekrasov, V. S. Parshin, A. A. Fedulov, A. I. Pugin

28.03.2016

Development of High-Temperature Nanostructured Silicate-Enamel Coatings for Enamelling Engineering Metalware

A. K. Kazak, V. V. Didenko

28.03.2016

Air-Tightness and Stability of Uglekon Type Carbon-Carbon Composite Materials in Corrosive Media

I. L. Sinani, V. M. Bushuev

28.03.2016

Feasibility Study of the Use of Nepheline-Limestone Charges Instead of Bauxite

V. M. Sizyakov, V. Yu. Bazhin, E. V. Sizyakova

28.03.2016

Example of an Expert Analysis of the Industrial Safety of Equipment

D. S. Naumov, R. V. Levkovich, A. A. Gainullin, A. P. Bogdanov

30.03.2016

Identification and Risk Assessment of Hazard Occurrence at the Aksu Ferroalloys Plant During 2007–2012

M. K. Imangazin, B. G. Almatova, R. M. Allanova

28.03.2016

Analysis of the Thermal State of a Semifinished Product During Hot Die Forging

I. V. Kolmogortsev, E. V. Ledovskikh, S. A. Osipov, A. K. Shmakov

28.03.2016

Analysis of the Kinetics of the Solidification of Steel Forging Ingots of Different Configurations. Part II. Results from Computer Modeling*

A. N. Romashkin, V. S. Dub, D. S. Tolstykh, A. N. Mal’ginov, I. A. Ivanov, G. A. Ekhvaya

28.03.2016

Effect of the Parameters of the Technology Used to Make Multiphase Automotive Sheet Steels on the Degree of Assimilation of the Alloying Components

A. I. Zaitsev, A. B. Stepanov, A. Yu. Kazankov, S. V. Stukalin

28.03.2016

Kinetics of the Static Recrystallization of Austenite in Niobium-Microalloyed Pipe Steels

A. V. Chastukhin, D. A. Ringinen, G. E. Khadeev, L. I. Efron

28.03.2016

Effect of Low-Carbon Steel 20GFL Heat Treatment Regime on Structure and Mechanical Properties

D. L. Vainshtein, A. I. Kovalev, A. Yu. Rashkovskii, A. V. Gabets, E. O. Chertovskikh

28.03.2016

Thermodynamic Development of Austenite-Martensite Class Corrosion-Resistant Steels Intended for a Bimetal Cladding Layer

N. G. Shaposhnikov, I. G. Rodionova, A. A. Pavlov

28.03.2016

Technology for Preparing Increased Strength Bimetal with a Nitrogen Two-Phase Steel Cladding Layer

A. M. Avdeenko, V. G. Molyarov, A. V. Kalashnikova

28.03.2016

Study of Multiphase Automotive Sheet Steel Local Corrosion Resistance by Electrochemical Methods

A. Yu. Kazankov, A. I. Zaitsev, I. G. Rodionova, A. V. Nishchik

28.03.2016

High-Temperature Gas Extrusion as a Promising Method of Producing Preforms for Tool Steels

V. E. Vaganov, A. V. Aborkin, V. D. Berbentsev, V. I. Bugakov, S. V. Zhilyaev, S. D. Kugul’tinov

28.03.2016

Carbonitriding as a Means of Alleviating the Wear of Metallurgical Equipment Parts

V. A. Korotkov

28.03.2016

Intermetallic Compound Formation During Reaction of Molten Aluminum with Titanium

L. M. Gurevich, V. G. Shmorgun

28.03.2016

Hot-Deformed Al–Ni Powder Materials Based on Alloy D-16 Mechanically-Activated Turnings

D. V. Slabkii, S. N. Sergeenko

28.03.2016

Plasma Welding of Aluminum Alloys with the Use of Two Direct ARCS on Reverse-Polarity Current

Yu. D. Shchitsyn, D. S. Belinin, V. Yu. Shchitsyn, S. D. Neulybin

28.03.2016

The Development of Steel Band Feeding for HSLA Heavy Plates

O. Isayev, O. Hress, C. Y. Hu, R. Xin, K. M. Wu

Springer Professional

Inhaltsverzeichnis (39 Artikel)

Status and Prospects of Ferroalloys Production in the Russian Federation

Computer Study of the Effect of Tooling Geometry on Deformation Parameters in the Plastic Shaping of Aluminum Wire Rod by Multi-ECAP-Conform

Accounting for the Technological History of the Formation of a Part in Strength Calculations. Part 2*

Prospects for the Use of Drum-Type Units to Recycle Metallurgical Slags

Liquid-Phase Reduction of Steelmaking Wastes

Method of Monitoring the Profile of a Blast Furnace and the Results of its Use

Effect of Oxides of Magnesium and Manganese and the Basicity of the Iron-Ore-Bearing Materials on the Ability of the Smelting Products to Filter Through the Coke Column in Blast Furnaces

Analysis of the Kinetics of the Solidification of Steel Forging Ingots of Different Configurations. Part I. Results from Cold Modeling

Modification of Steel and Alloys with Rare-Earth Elements. Part 1

“Bainitic Refinement” of Machine Steels Microalloyed with Vanadium and Nitrogen

Effect of Technology for Modification with Calcium and Ree on Pipe Steel Nonmetallic Inclusion Morphology and Production Properties

Effect of Mn, Al, Ni, and C Content on the Equilibrium Phase Composition of Alloys Based on the Fe–Mn–Al–Ni–C System

Development of Slag-Forming Mixture for Steel-Pouring Ladle and its Application Technology During Production of Steels with High Aluminum and Sulfur Content

Mechanisms for Improving Chemical and Structural Homogeneity of Hot-Rolled Product for Objects Prepared by Hot Stamping

Study of the Effect of Chemical Composition and Heat Treatment on Corrosion Resistance Indices for Martensitic Class Stainless Steels Alloyed with Nitrogen

Evaluation of the Possibility of Retarding Steel Recrystallization During Hot Rolling with Precipitation of Manganese Sulfide Particles

Development of Steel Chemical Composition and Heat Treatment for Electrowelded Casings with Increased Strength and Cold Resistance

Assimilation of New Steel Alloying Composition for Manufacturing Line Pipes of Strength Classes K52–K55

Study of the Resistance of Steels 18KhMFB And 18Kh3MFB to Hot Deformation

Determination of Residual Ductility in the Forging of Bars on a Lever-Type Radial Forging Machine

Development of High-Temperature Nanostructured Silicate-Enamel Coatings for Enamelling Engineering Metalware

Air-Tightness and Stability of Uglekon Type Carbon-Carbon Composite Materials in Corrosive Media

Feasibility Study of the Use of Nepheline-Limestone Charges Instead of Bauxite

Example of an Expert Analysis of the Industrial Safety of Equipment

Identification and Risk Assessment of Hazard Occurrence at the Aksu Ferroalloys Plant During 2007–2012

Analysis of the Thermal State of a Semifinished Product During Hot Die Forging

Analysis of the Kinetics of the Solidification of Steel Forging Ingots of Different Configurations. Part II. Results from Computer Modeling*

Effect of the Parameters of the Technology Used to Make Multiphase Automotive Sheet Steels on the Degree of Assimilation of the Alloying Components

Kinetics of the Static Recrystallization of Austenite in Niobium-Microalloyed Pipe Steels

Effect of Low-Carbon Steel 20GFL Heat Treatment Regime on Structure and Mechanical Properties

Thermodynamic Development of Austenite-Martensite Class Corrosion-Resistant Steels Intended for a Bimetal Cladding Layer

Technology for Preparing Increased Strength Bimetal with a Nitrogen Two-Phase Steel Cladding Layer

Study of Multiphase Automotive Sheet Steel Local Corrosion Resistance by Electrochemical Methods

High-Temperature Gas Extrusion as a Promising Method of Producing Preforms for Tool Steels

Carbonitriding as a Means of Alleviating the Wear of Metallurgical Equipment Parts

Intermetallic Compound Formation During Reaction of Molten Aluminum with Titanium

Hot-Deformed Al–Ni Powder Materials Based on Alloy D-16 Mechanically-Activated Turnings

Plasma Welding of Aluminum Alloys with the Use of Two Direct ARCS on Reverse-Polarity Current

The Development of Steel Band Feeding for HSLA Heavy Plates

Aktuelle Ausgaben

Ausgabe 1-2/2022

Ausgabe 11-12/2022

Ausgabe 9-10/2022

Ausgabe 7-8/2021

Ausgabe 5-6/2021

Ausgabe 3-4/2021

Ausgabe 1-2/2021

Ausgabe 11-12/2021

Ausgabe 9-10/2021

Ausgabe 7-8/2020

Premium Partner

Marktübersichten