Metallurgist 3-4/2013

01.07.2013

Detecting microporosity defects in steel castings by computer modeling of the casting operation in ProCAST

A. D. Abdullin

01.07.2013

Use of superplastic deformation and diffusion welding to form a tee designed with a complex set of internal stiffening elements

A. K. Shmakov, V. V. Mironenko, K. K. Kirishina, V. V. Kotov

01.07.2013

Development of sinter production at the Chelyabinsk Metallurgical Combine

N. N. Gorshkov, E. A. Kazantsev, N. P. Myagchenkova, O. V. Tregubov, E. Yu. Skorik

01.07.2013

Technology for restoring the original profile of blast furnaces at the Chelyabinsk Metallurgical Combine

D. V. Zotov, V. A. Andreev, N. N. Gorshkov, N. S. Polyakov, A. V. Denisov

01.07.2013

Method of calculating and analyzing the factors that affect the coke consumption and productivity of blast furnaces at the Chelyabinsk Metallurgical Combine

Yu. A. Frolov, A. G. Ptichnikov, V. Kh. Barinov, N. N. Gorshkov

01.07.2013

Experimental testing of the validity of mathematical models of hydrodynamics and heat transfer for the melt-processing conditions in a ladle-furnace unit

V. P. Piptyuk, S. E. Samokhvalov, I. A. Pavlyuchenkov, V. V. Motsnyi, A. G. Rod’, S. N. Pavlov, G. A. Andrievskii, A. A. Anosova

01.07.2013

Effect of chilling of the top part of a steel ingot on the conditions of its crystallization and the quality of forgings obtained from it

A. N. Galkin, N. A. Zyuban, D. V. Rutskii, S. B. Gamanyuk, A. Ya. Puzikov, V. V. Firsenko

01.07.2013

Study of the quality of ultrathick high-strength shipbuilding steel plate

V. G. Milyuts, V. V. Tsukanov, N. F. Vladimirov

01.07.2013

Experience of using accelerated cooling in production of steel X70 plate for the Central Asia – China gas pipeline

A. V. Pogozhev, E. O. Tskitishvili, Yu. I. Matrosov, M. B. Klyukvin, M. Yu. Matrosov, G. N. Konovalov

01.07.2013

Study of potential use of combined activators in sintering powder-metallurgical alloy based on iron

E. D. Bendereva

01.07.2013

Powder particle formation mechanism with dispersion of different molten metals

P. A. Lykov, E. V. Safonov, A. O. Shul’ts

01.07.2013

Formation features of highly resistant carbide and boride coatings prepared by a two-stage method

G. V. Levchenko, A. B. Sychkov, A. M. Nesterenko, V. L. Plyuta

01.07.2013

Status of the organized recycling of cadmium-bearing secondary raw materials

A. R. Barashev, S. V. Karelov, S. V. Mamyachenkov, O. S. Anisimova

01.07.2013

Technology for the hydrometallurgical processing of a complex multicomponent sulfide-based raw material

D. A. Rogozhnikov, S. V. Karelov, S. V. Mamyachenkov, O. S. Anisimova

01.07.2013

Analysis of the feasibility of reducing fuel consumption and carbon-dioxide emissions and obtaining carbon credits with the use of sverdlovskaya-oblast factories as an example

V. P. Anufriev, V. G. Lisienko, A. P. Kuligin, A. V. Lapteva, Yu. N. Chesnokov, Yu. K. Malikov, T. P. Ryzhova

01.07.2013

Prospects for involvement of low-grade molybdenum and tungsten concentrates in metallurgical processing

A. S. Medvedev, P. V. Aleksandrov, B. Z. Razykov, A. O. Rodionov, O. V. Sannikova

01.07.2013

Study of hydrogasdynamic processes in a system of "TSL-reactor – settler" units by cold modeling methods

V. P. Zhukov, B. V. Kolmachikhin

01.07.2013

Simulation of the combined effect of production factors on metallurgical sinter mechanical strength

M. Yu. Ryabchikov, V. V. Grebennikova

01.07.2013

Effect of Pulverized-Coal Fuel on the Emissivity of the Tuyere Zone and the Thermal Regime of the Hearth of a Blast Furnace

S. L. Yaroshevskii, Yu. L. Kurbatov, I. V. Mishin, A. V. Kuzin

01.07.2013

Mastering a Technology for Making Stainless Steel on a VOD Unit at the Chelyabinsk Metallurgical Combine

V. N. Artyushov, S. P. Bochkarev, S. V. Igolkin, A. N. Makarevich, S. M. Fomchenko

01.07.2013

The Use of Thermal-Imaging Inspection at the Chelyabinsk Metallurgical Combine

M. I. Zuev, I. V. Konovalov, A. V. Kuznetsov, R. R. Gareev, S. P. Bochkarev

01.07.2013

Study of Steel 08Kh18N10T Centrifugally-Cast Pipe Billet Properties

B. V. Barichko, Ya. I. Kosmatskii, S. V. Rushchits, A. M. Akhmed’yanov, M. I. Gaslenko, V. B. Voskhodov, A. M. Zubkov

01.07.2013

Effect of Preliminary Deformation of the Cast Semifinished Product on the Service Properties of Wheel Steel

V. P. Romanenko, A. V. Fomin, A. N. Nikulin

01.07.2013

Features of Multi-Electrode Submerged-Arc Welding in the Production of High-Strength Thick-Walled Pipes

A. N. Bortsov, I. P. Shabalov, A. A. Velichko, K. Yu. Mentyukov, I. Yu. Utkin

01.07.2013

Development of a Competitive Technology to Make Wire for Metal Cord

V. A. Kharitonov, A. Yu. Stolyarov

01.07.2013

Method of Measuring the Mass Fraction of Selenium in Heat-Resistant Nickel Alloys

V. A. Maslov, V. A. Tikhonova, D. G. Rafikova, E. N. Udilova

01.07.2013

Preparation of Rapidly Cooled Fibers by Melt Extraction

V. N. Antsiferov, A. S. Nechaev

01.07.2013

High-Energy Forming of Monolithic and Powder Materials by Pressure

M. N. Samodurova, L. A. Barkov, V. A. Ivanov, B. A. Yarov

01.07.2013

Features of Powder Steel Formation with Electric-Contact Compaction

T. A. Litvinova, S. N. Egorov

01.07.2013

Determination of Aluminum Oxide Concentration in Molten Cryolite-Alumina

V. A. Ershov, I. A. Sysoev, V. V. Kondrat’ev

01.07.2013

Preparation of Copper Electrical Engineering Alloy Strip with High Service Properties

P. A. Vasilevskii, L. M. Zheleznyak, M. Yu. Borodin, K. Yu. Mal’tseva

01.07.2013

Russian Shelf 2013

An International Conference

L. A. Kondratov

01.07.2013 | Erratum

Erratum to the article “Evaluation of Possible Mechanical Property Improvement for Alloy of the Al–Fe–Si–Mn System by Equal-Channel Angular Pressing,” by A. B. Naizabekov and V. A. Andreyashchenko, Vol. 57, Nos. 1–2, pp. 159–163, May, 2013.

A. B. Naizabekov, V. A. Andreyachshenko

Springer Professional

Inhaltsverzeichnis (33 Artikel)

Detecting microporosity defects in steel castings by computer modeling of the casting operation in ProCAST

Use of superplastic deformation and diffusion welding to form a tee designed with a complex set of internal stiffening elements

Development of sinter production at the Chelyabinsk Metallurgical Combine

Technology for restoring the original profile of blast furnaces at the Chelyabinsk Metallurgical Combine

Method of calculating and analyzing the factors that affect the coke consumption and productivity of blast furnaces at the Chelyabinsk Metallurgical Combine

Experimental testing of the validity of mathematical models of hydrodynamics and heat transfer for the melt-processing conditions in a ladle-furnace unit

Effect of chilling of the top part of a steel ingot on the conditions of its crystallization and the quality of forgings obtained from it

Study of the quality of ultrathick high-strength shipbuilding steel plate

Experience of using accelerated cooling in production of steel X70 plate for the Central Asia – China gas pipeline

Study of potential use of combined activators in sintering powder-metallurgical alloy based on iron

Powder particle formation mechanism with dispersion of different molten metals

Formation features of highly resistant carbide and boride coatings prepared by a two-stage method

Status of the organized recycling of cadmium-bearing secondary raw materials

Technology for the hydrometallurgical processing of a complex multicomponent sulfide-based raw material

Analysis of the feasibility of reducing fuel consumption and carbon-dioxide emissions and obtaining carbon credits with the use of sverdlovskaya-oblast factories as an example

Prospects for involvement of low-grade molybdenum and tungsten concentrates in metallurgical processing

Study of hydrogasdynamic processes in a system of "TSL-reactor – settler" units by cold modeling methods

Simulation of the combined effect of production factors on metallurgical sinter mechanical strength

Effect of Pulverized-Coal Fuel on the Emissivity of the Tuyere Zone and the Thermal Regime of the Hearth of a Blast Furnace

Mastering a Technology for Making Stainless Steel on a VOD Unit at the Chelyabinsk Metallurgical Combine

The Use of Thermal-Imaging Inspection at the Chelyabinsk Metallurgical Combine

Study of Steel 08Kh18N10T Centrifugally-Cast Pipe Billet Properties

Effect of Preliminary Deformation of the Cast Semifinished Product on the Service Properties of Wheel Steel

Features of Multi-Electrode Submerged-Arc Welding in the Production of High-Strength Thick-Walled Pipes

Development of a Competitive Technology to Make Wire for Metal Cord

Method of Measuring the Mass Fraction of Selenium in Heat-Resistant Nickel Alloys

Preparation of Rapidly Cooled Fibers by Melt Extraction

High-Energy Forming of Monolithic and Powder Materials by Pressure

Features of Powder Steel Formation with Electric-Contact Compaction

Determination of Aluminum Oxide Concentration in Molten Cryolite-Alumina

Preparation of Copper Electrical Engineering Alloy Strip with High Service Properties

Russian Shelf 2013

Erratum to the article “Evaluation of Possible Mechanical Property Improvement for Alloy of the Al–Fe–Si–Mn System by Equal-Channel Angular Pressing,” by A. B. Naizabekov and V. A. Andreyashchenko, Vol. 57, Nos. 1–2, pp. 159–163, May, 2013.

Aktuelle Ausgaben

Ausgabe 1-2/2022

Ausgabe 11-12/2022

Ausgabe 9-10/2022

Ausgabe 7-8/2021

Ausgabe 5-6/2021

Ausgabe 3-4/2021

Ausgabe 1-2/2021

Ausgabe 11-12/2021

Ausgabe 9-10/2021

Ausgabe 7-8/2020

Premium Partner

Marktübersichten