Skip to main content



Metallurgist 3-4/2019

Ausgabe 3-4/2019

Inhaltsverzeichnis ( 27 Artikel )

29.07.2019 | Ausgabe 3-4/2019

Metallurgist Volume 63, Number 3

13.07.2019 | Ausgabe 3-4/2019

Heat Losses in the Cooling System and Consumption of Coke to Compensate for Them in Blast Furnaces of Various Volumes

A. L. Chaika, V. V. Lebed’, K. S. Tsyupa, V. Yu. Shostak, B. V. Kornilov, A. A. Zherebetskii, A. A. Sokhatskii

16.07.2019 | Ausgabe 3-4/2019

Plasma Heating of Periclase-Carbonaceous Refractory for Lining of Steel Ladles

Ya. L. Kats, M. V. Krasnyanskii, D. I. Yusupov, A. S. Tyuftyaev, M. Kh. Gadzhiev, M. A. Khromov

12.07.2019 | Ausgabe 3-4/2019

Influence of “Soft” Reduction on the Structure of Continuous Cast Ingot and the Properties of Rolled Products of Microalloyed Steels

A. N. Zavalishchin, M. I. Rumyantsev, D. N. Chikishev, M. V. Efremova, E. V. Kozhevnikova

18.07.2019 | Ausgabe 3-4/2019

Improvement of Heat-Treatment Conditions for Square-Cross-Section Steel Billets Downstream of a Continuous-Section Billet Casting Machine

S. V. Lukin, K. Yu. Levashev

13.07.2019 | Ausgabe 3-4/2019

Improving the Control of the OEMK Heating Furnaces by Using Parameter-Scheduled Adaptive PI Controllers

A. V. Fomin, A. I. Glushchenko

13.07.2019 | Ausgabe 3-4/2019

Austenitic Structure Evolution During Pipe Steel Coiled Rolled Product Manufacture in Casting and Rolling Complexes of Different Configurations

A. V. Muntin, A. V. Chastukhin, D. A. Ringinen, L. I. Éfron

12.07.2019 | Ausgabe 3-4/2019

Investigation of Production Conditions for Ultra-Low Carbon IF-, IF-HS-Steels from Cold-Rolled Product of Different Strength Classes Annealed in Bell Furnaces

A. I. Zaitsev, A. V. Koldaev, A. B. Stepanov, A. V. Grishin, I. A. Krasnyanskaya

16.07.2019 | Ausgabe 3-4/2019

Damping Steels for Sheet Stacker Components During Sheet Rolling

E. B. Utepov, E. P. Pototskii, V. S. Shevtsova, E. N. Kattabekov, R. Zh. Abuova, A. S. Berkinbaeva

13.07.2019 | Ausgabe 3-4/2019

Electron-Beam Surface Treatment of Titanium Alloy Ingots. Part 2

S. V. Akhonin, A. N. Pikulin, V. V. Klochai, A. D. Ryabtsev

12.07.2019 | Ausgabe 3-4/2019

Rare Earth Metal Extraction from Apatite Ores

O. V. Cheremisina, V. V. Sergeev, A. T. Fedorov, A. P. Il’ina

16.07.2019 | Ausgabe 3-4/2019

Special Titanium-Containing Coating Application Technology

S. I. Mirgorodskii, G. D. Bitsoev, L. Mirgorodskii, S. V. Kaigorodov

12.07.2019 | Ausgabe 3-4/2019

Assimilation of Steel Contemporary Extra-Furnace Treatment Technology with the Aim of Reducing Metal Contamination with Nonmetallic Inclusions

V. V. Emel’yanov, I. S. Murzin, S. V. Tyutyunik, S. S. Belonozhko, E. A. Kolokolov, I. V. Garkushenko

01.07.2019 | Ausgabe 3-4/2019

Metallurgist Volume 63, Number 4

12.07.2019 | Ausgabe 3-4/2019

Charging System Enhancements for a Blast Furnace at Azovstal Iron and Steel Works Private Joint-Stock Corporation

S. V. Sosin, S. A. Karikov, V. B. Semakova, V. P. Russkikh, V. V. Semakov

16.07.2019 | Ausgabe 3-4/2019

Introduction of Energy Efficient Solutions During Cast Iron Smelting at PJSC “NLMK”

S. V. Filatov, I. F. Kurunov, V. N. Titov, S. A. Zagainov

13.07.2019 | Ausgabe 3-4/2019

Calculation and Analysis of the Relationship Between the Efficiency and Position of Electric Arcs and Power Consumption in Electric Arc Furnaces (EAF) of Smaller and Larger Capacity. Part I. Calculation and Analysis of the Relationship Between Arc Efficiency and Power Consumption

A. N. Makarov

13.07.2019 | Ausgabe 3-4/2019

Assessment of the Stress–Strain State of the Strand and Caster Near the Foot Rollers in the Secondary-Cooling Zone

M. V. Androsenko

16.07.2019 | Ausgabe 3-4/2019

Optimization of the Composition and Amount of Nonmetallic Inclusions in a Continuously Cast Billet Based on the Deoxidation of the Melt with Aluminum and Calcium Carbide

D. V. Rutskii, G. V. Babin, S. B. Gamanyuk, V. V. Morozov, Yu. L. Kornev

13.07.2019 | Ausgabe 3-4/2019

Study of Transient and Steady-State Stages During Two-High and Three-High Screw Rolling of a 12Kh18N10T Steel Workpiece

M. M. Skripalenko, B. A. Romantsev, L. M. Kaputkina, S. P. Galkin, M. N. Skripalenko, V. V. Cheverikin

16.07.2019 | Ausgabe 3-4/2019

Improvement of Low-Alloy Pipe Steel Sulfide Stress Cracking Resistance

A. A. Kholodnyi, Ya. S. Kuznechenko, Yu. I. Matrosov, M. V. Il’ichev, D. I. Yusupov

12.07.2019 | Ausgabe 3-4/2019

Improvement of a Set of Steel Properties Due to Forming Phase Precipitates During Hot Deformation Combined with Quenching

A. V. Koldaev, F. V. Arifulov, A. I. Zaitsev

16.07.2019 | Ausgabe 3-4/2019

Production Features of Magnesium-Neodymium Master Alloy Synthesis

S. A. Savchenkov, V. Yu. Bazhin, V. N. Brichkin, Ya. I. Kosov, V. L. Ugolkov

13.07.2019 | Ausgabe 3-4/2019

Development of a Production Scheme for Utilizing Vanadium Pentoxide Hydrometallurgical Production Waste

U. A. Kologrieva, A. I. Volkov, A. S. Kirichenko, V. M. Ermolov, M. G. Mirakova

16.07.2019 | Ausgabe 3-4/2019

Features of VZhL21 Nickel-Base Superalloy Structure Formation During Selective Laser Melting, Vacuum Heat Treatment, and Hot Isostatic Compaction

D. I. Sukhov, N. V. Petrushin, D. V. Zaitsev, M. M. Tikhonov

12.07.2019 | Ausgabe 3-4/2019

Effect of Continuous Extrusion Parameters on Alloy M1 Round Section Bar Microstructure and Mechanical Property Formation

A. V. Zinov’ev, A. N. Koshmin, A. Ya. Chasnikov

20.07.2019 | Correction | Ausgabe 3-4/2019

Correction to: Structure Formation in the Zones of Joints Obtained by Explosion Welding with Subsequent Rolling of a Five-Layer Titanium-Steel Composite

V. N. Arisova, L. M. Gurevich, A. F. Trudov, A. G. Serov, V. O. Kharlamov

Aktuelle Ausgaben

Premium Partner


    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.