Skip to main content
main-content

Zeitschrift

Metallurgist

Metallurgist 5-6/2014

Ausgabe 5-6/2014

Inhaltsverzeichnis ( 39 Artikel )

01.09.2014 | Ausgabe 5-6/2014

End-to-End Simulation of Casting and Metal-Forming Operations with ProCAST and Qform Software

A. D. Abdullin, A. A. Ershov

01.09.2014 | Ausgabe 5-6/2014

Automated Information System for Metallurgical Plants

T. V. Scherbina

01.09.2014 | Ausgabe 5-6/2014

Nickel Sulfide Concentrate Processing Using Low-Temperature Roasting with Sodium Chloride

V. A. Imideev, P. V. Aleksandrov, A. S. Medvedev, O. V. Bazhenova, A. R. Khanapieva

01.09.2014 | Ausgabe 5-6/2014

Resources-Saving Technology for Recycling Off-Grade Waste Products Cast from Superalloys

V. V. Sidorov, V. E. Rigin, A. V. Goryunov, P. G. Min

01.09.2014 | Ausgabe 5-6/2014

The Use of Bentonite Clays from the Voskresensk Deposit to Make Iron-Ore Pellets

A. N. Shapovalov, A. V. Zavodyanyi

01.09.2014 | Ausgabe 5-6/2014

Evaluating the Efficiency of Blast Furnaces and the Prospects of Blast-Furnace Smelting

I. F. Kurunov, S. V. Filatov

01.09.2014 | Ausgabe 5-6/2014

Evaluation of the Effect of Modifier Composition with Nanostructured Additives on Grey Cast Iron Properties

V. V. Kondrat’ev, A. E. Balanovskii, N. A. Ivanov, V. A. Ershov, M. V. Kornyakov

01.09.2014 | Ausgabe 5-6/2014

Determination of the Integral Emissivity of a Periclase-Carbon Lining

M. V. Krasnyanskii, Ya. L. Kats

01.09.2014 | Ausgabe 5-6/2014

The Formation of Sulfide Inclusions and Their Location Within Grains in Relation to Steel 20 Deoxidation Conditions

O. A. Shevtsova, N. A. Zyuban, S. A. Pegisheva*, D. V. Rutskii, K. E. Titov, N. V. Klyachina

01.09.2014 | Ausgabe 5-6/2014

Applying Coatings to the Narrow Walls of Continuous-Caster Molds to Improve the Quality of the Surface of Slabs

A. A. Gerasimova, A. G. Radyuk, L. M. Glukhov

01.09.2014 | Ausgabe 5-6/2014

NLMK-DanSteel: Production of Plates and Heavy Slabs

Yu. A. Bokachev, I. G. Sarkits, E. A. Goli-Oglu

01.09.2014 | Ausgabe 5-6/2014

Control of Structure Formation During Thermomechanical Treatment of Shipbuilding and Pipe Steels of Unified Chemical Composition

S. V. Korotovskaya, V. V. Orlov, E. I. Khlusova

01.09.2014 | Ausgabe 5-6/2014

Study of the Tractive Forces Applied to Galvanized Strip on a Straightening Machine in a Continuous Hot-Galvanizing Unit

E. A. Maksimov, R. L. Shatalov, N. N. Litvinova

01.09.2014 | Ausgabe 5-6/2014

Heat Treatment as a Method for Excluding IGSCC for Dn300 RBMK-1000 Pipeline Welded Joints

A. N. Romanov, A. G. Derzhavin, K. I. Shut’ko, M. V. Bortnikov, A. B. Korostelev

01.09.2014 | Ausgabe 5-6/2014

Factors That Affect the Quality of Hot-Forged Bimetallic Powder Products

E. N. Bessarabov, M. Q. K. Yasi, Yu. G. Dorofeyev, V. Yu. Dorofeyev

01.09.2014 | Ausgabe 5-6/2014

Material Composition of the Dust from the Electrostatic Precipitators of a Vanyukov Furnace at the Middle Ural Copper Smelter

E. N. Selivanov, G. V. Skopov, R. I. Gulyaeva, A. V. Matveev

01.09.2014 | Ausgabe 5-6/2014

EZRAZ ZSMK – 50 Years of Success

A. B. Yuryev

01.09.2014 | Ausgabe 5-6/2014

Computer Modeling, Volume Prototyping, and Non-contact Optical Scanning in an Integrated Technology for Pre-production Casting. Trial Use

A. K. Shmakov, E. I. Unagaev, I. V. Kolmogortsev, S. A. Osipov, V. V. Kotov

01.09.2014 | Ausgabe 5-6/2014

Introduction of a Level-2 Automated System as Part of the Reconstruction of a Walking-Beam Furnace in the Rail-Beam Shop

K. V. Volkov, E. A. Kolotov, A. Yu. Syusyukin

01.09.2014 | Ausgabe 5-6/2014

Improving the Effectiveness of Industrial Lighting

V. V. Bogatishchev

01.09.2014 | Ausgabe 5-6/2014

Development of Methods and Technologies at the Sinter Plant

A. I. Shentsov, A. A. Odintsov, E. B. Svirin

01.09.2014 | Ausgabe 5-6/2014

Introduction of a Unit for Dust-Free Coke Discharge

S. N. Golubtsov, K. P. Karakash

01.09.2014 | Ausgabe 5-6/2014

Making more Efficient Use of Solid Fuel in Two-Layer Sintering

A. V. Feoktistov, A. A. Odintsov

01.09.2014 | Ausgabe 5-6/2014

Improving Blast-Furnace Smelting Indices Through More Efficient Screening of Sinter Fines

L. V. Portnov, A. M. Koverzin, V. I. Kutran’, L. D. Nikitin

01.09.2014 | Ausgabe 5-6/2014

Technology Development and Efficiency Assessment for Waste Utilization in Pig-Iron Production

A. M. Koverzin, L. D. Nikitin, L. V. Portnov, A. A. Drozhzhin

01.09.2014 | Ausgabe 5-6/2014

Improving the Durability of Blast-Furnace Tuyeres

L. V. Portnov, L. D. Nikitin, S. F. Bugaev, V. G. Shchipitsyn

01.09.2014 | Ausgabe 5-6/2014

Development of Extra-Furnace Treatment Technology for Blast-Furnace Iron in Order to Manufacture Replacement Metallurgical Equipment with Improved Operating Life

V. V. Andreev, D. A. Lubyanoi, Yu. N. Samsonov, I. A. Kaminskaya, S. V. Lubyanaya

01.09.2014 | Ausgabe 5-6/2014

Development of Steelmaking

A. V. Amelin, A. M. Koverzin, M. V. Utrobin, A. N. Ivanov, D. B. Foygt

01.09.2014 | Ausgabe 5-6/2014

Changing the Technical-Economic Indices of Rail-Steel Production by Sorting Scrap Based on its Content of Residual Elements

P. A. Shabanov, K. V. Volkov, E. P. Kuznetsov, I. V. Aleksandrov, A. Yu. Batalov

01.09.2014 | Ausgabe 5-6/2014

Development of Technology for the Secondary Treatment of Metal for Continuous Billet Casters

A. V. Amelin, A. M. Koverzin, Yu. N. Nosov, M. V. Utrobin, N. G. Matveev, V. V. Musokhranov

01.09.2014 | Ausgabe 5-6/2014

Modeling the Laws that Determine the Quality of Rolled Rounds During the Rolling Operation

V. V. Brinza, I. S. Kuznetsov

01.09.2014 | Ausgabe 5-6/2014

Optimizing the Rolling Conditions on a 250-2 Light-Section Mill

A. A. Umanskii, Yu. A. Mart’yanov

01.09.2014 | Ausgabe 5-6/2014

Assimilation of Advanced Roll Materials in Rolling Production

Yu. O. V’yuntsov, A. M. Koverzin, A. Yu. Romadin, V. V. Salomykin, E. V. Saprykin

01.09.2014 | Ausgabe 5-6/2014

Analysis of Experimental Dependence of Rail Steel E78KhSF Deformation Resistance on Deformation Temperature, Rate, and Degree

A. V. Golovatenko, V. V. Dorofeev, V. A. Trusov, K. V. Volkov, A. V. Dobryanskii

01.09.2014 | Ausgabe 5-6/2014

Cold-Resistant Steel Rebar

E. A. Ivanov, O. V. Dikan’, Yu. O. V’yuntsov, E. V. Chinokalov, S. A. Dyubina

01.09.2014 | Ausgabe 5-6/2014

Cold-Drawn Reinforcing Wire with Screw Profile

A. R. Fastykovskii, E. V. Chinokalov, A. G. Milovanov, N. V. Myskova, A. A. Shumkin

01.09.2014 | Ausgabe 5-6/2014

The Repairs Project as a Tool for Improving the Productivity of Equipment

M. Yu. Mezentsev, A. G. Shabis

01.09.2014 | Ausgabe 5-6/2014

Zsmk Reinforcement Steel – Challenge Accepted

O. O. Tsyba, V. V. Kovalenko

01.09.2014 | Erratum | Ausgabe 5-6/2014

Erratum to: Analysis of Pore Formation and Impeded Shrinkage of an Alloy in the System ProCast

I. N. Erdakov, A. V. Karpinskii, V. V. Novokreshchenov

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise