Metallurgist 9-10/2008

01.09.2008

Operating a sheet-rolling complex to minimize energy costs

R. L. Shatalov, A. L. Genkin

01.09.2008

Developing and testing structural steels with superior resistance to cold and to cracking in hydrogen-sulfide-bearing media for use in the production of electric-welded (HFC) oil-field tubing

V. N. Zikeev, V. P. Kharchevnikov, N. V. Filatov, K. V. Anuchin

01.09.2008

Using an AVS radial-forging machine to prepare the ends of tubes for drawing

A. P. Karamyshev, I. I. Nekrasov, V. S. Parshin, V. A. Systerov

01.09.2008

Effective technologies and machines for obtaining cold-worked tubes and other products

V. I. Sokolovskii

01.09.2008

Introduction of flatness gage IP-4 on the continuous Wean-Damiron heat-treatment line at the Samara Metallurgical Plant

S. V. Trusillo, V. A. Agureev, V. Yu. Aryshenskii, A. N. Mironov, V. N. Samonin, A. V. Kuryakin

01.09.2008

Fine microstructure of wire rods manufactured from Sv-08G2S high-plasticity steel

A. M. Nesterenko, A. B. Sychkov, S. Yu. Zhukova, V. I. Sukhomlin

01.09.2008

Modern rolls for the 2000 mills at the Cherepovets and Magnitogorsk metallurgical combines

K. Gostev

01.09.2008

Damping capacity of the roller-type hinges of spindles in the drive rolls of rolling mills

V. I. Bobukh, G. S. Sukov, I. A. Bobukh, A. V. Satonin

01.09.2008

Improving the tribological characteristics of powder steel parts via multicomponent diffusion saturation of working surfaces

A. B. Korostelev, D. A. Chumak-Zhun

01.09.2008

Blast furnace no. 6 at the Novolipetsk Metallurgical Combine – the best Russian design

I. F. Kurunov, S. S. Lyapin, V. L. Emel’yanov, V. N. Titov, D. D. Ivanov

01.09.2008

Use of mathematical models to optimize process parameters in the sintering of Mikhailovskii and Lebedinskii concentrates

A. A. Panychev, A. P. Nikonova

01.09.2008

Monitoring and selection of optimum production parameters for metallurgical-grade lime to be used in ferrous metallurgy

V. O. Golubev, V. E. Nikol’skii, B. S. Abezgauz, Ya. E. Shklyarskii, E. A. Zagrivnyi, I. N. Beloglazov

01.09.2008

Effect of plasma treatment parameters on the structure and properties of type 60G steel

M. V. Il’ichev, A. S. Tyuftyaev, O. V. Livanova, G. A. Filippov

01.09.2008

Procedure for determining the stress state of a work roll by the boundary-elements method

V. I. Kadoshnikov, V. M. Moskvin, E. L. Belevskaya

01.09.2008

Ensuring product quality in hardware-manufacturing technologies

A. G. Korchunov

01.09.2008

Evaluating the maximum draft and safety factor in wire-drawing

G. N. Gur’yanov

01.09.2008

Cables with a steel core for hot-metal charging cranes

V. G. Popov, D. F. Gabtykaev

Springer Professional

Metallurgist

Ausgabe 9-10/2008

Inhaltsverzeichnis (17 Artikel)

Operating a sheet-rolling complex to minimize energy costs

Developing and testing structural steels with superior resistance to cold and to cracking in hydrogen-sulfide-bearing media for use in the production of electric-welded (HFC) oil-field tubing

Using an AVS radial-forging machine to prepare the ends of tubes for drawing

Effective technologies and machines for obtaining cold-worked tubes and other products

Introduction of flatness gage IP-4 on the continuous Wean-Damiron heat-treatment line at the Samara Metallurgical Plant

Fine microstructure of wire rods manufactured from Sv-08G2S high-plasticity steel

Modern rolls for the 2000 mills at the Cherepovets and Magnitogorsk metallurgical combines

Damping capacity of the roller-type hinges of spindles in the drive rolls of rolling mills

Improving the tribological characteristics of powder steel parts via multicomponent diffusion saturation of working surfaces

Blast furnace no. 6 at the Novolipetsk Metallurgical Combine – the best Russian design

Use of mathematical models to optimize process parameters in the sintering of Mikhailovskii and Lebedinskii concentrates

Monitoring and selection of optimum production parameters for metallurgical-grade lime to be used in ferrous metallurgy

Effect of plasma treatment parameters on the structure and properties of type 60G steel

Procedure for determining the stress state of a work roll by the boundary-elements method

Ensuring product quality in hardware-manufacturing technologies

Evaluating the maximum draft and safety factor in wire-drawing

Cables with a steel core for hot-metal charging cranes

Aktuelle Ausgaben

Ausgabe 3-4/2022

Ausgabe 1-2/2022

Ausgabe 11-12/2022

Ausgabe 9-10/2022

Ausgabe 7-8/2021

Ausgabe 5-6/2021

Ausgabe 3-4/2021

Ausgabe 1-2/2021

Ausgabe 11-12/2021

Ausgabe 9-10/2021

Premium Partner

Marktübersichten