Metallurgist 9-10/2009

01.09.2009

Analysis of the behavior of alkalis in a blast furnace

I. F. Kurunov, V. N. Titov, V. L. Emel’yanov, S. A. Lysenko, A. N. Arzamastsev

01.09.2009

Increase in the level of mechanical and other service properties of automobile sheet steels by controlling precipitation of nonmetallic excess phases

E. Kh. Shakhpazov, A. I. Gordienko, A. I. Zaitsev, I. G. Rodionova, V. V. Krylov-Olefirenko, N. G. Shaposhnikov

01.09.2009

Energy- and resource-saving technology for performing hydraulic tests on the pipes of large central heating systems

V. G. Pleshivtsev, I. P. Pulner, Yu. A. Pak, O. V. Livanova, G. A. Filippov, O. N. Chevskaya

01.09.2009

Express evaluation of an index characterizing the contact fatigue strength of railroad rails

A. M. Stepashin, G. N. Yunin

01.09.2009

Thermal stresses in the work rolls of hot-strip mills

L. S. Kokhan, A. V. Aldunin, N. A. Farunda, L. M. Semenova

01.09.2009

Mechanical properties of antifriction iron-manganese alloys on a metastable base

T. F. Volynova, I. K. Buravlev, M. A. Lushkin

01.09.2009

Deformation of the skin of a continuous-cast slab in the mold of the caster

K. N. Vdovin, V. E. Zlov, V. G. Suspitsin

01.09.2009

Effect of carbon and small concentrations of nonferrous metal impurities on continuously-cast billet quality

O. B. Isaev

01.09.2009

Improving chemical homogeneity and the stability of the mechanical characteristics in large products made for machine construction

D. V. Rutskii, N. A. Zyuban, K. E. Titov

01.09.2009

Effect of secondary electrospark treatment with carbon-bearing materials on the properties of titanium alloys

A. V. Strelets, I. A. Kolomiets, E. A. Levashov, A. E. Kudryashov, Zh. V. Eremeeva

01.09.2009

Kinetics of the leaching of gold from tailings from the beneficiation of chrysotile-asbestos ores

A. K. Kobzhasov, D. K. Abdrakhmanova, S. E. Punenkov

01.09.2009

Improving steel deoxidation technology with the use of data on the activity of dissolved oxygen

E. A. Chichkarev

01.09.2009

Developing a theory of the refining of metal in tundishes based on postulates of fluid mechanics

Yu. A. Samoilovich

01.09.2009

Study of transients in metal-shaping

A. P. Karamyshev, I. I. Nekrasov, V. S. Parshin, A. I. Pugin, A. A. Fedulov

01.09.2009

Analysis of the effect of deformation scheme on the quality of axle steel at the nizhniy tagil metallurgical combine

Yu. P. Petrenko, V. F. Myunkh, A. A. Bogatov, D. A. Vit’kin

01.09.2009

Development of coiled steels for electric-welded (HFC) oil and gas line pipe, casing, and pump-compressor tubing with high strength and good resistance to cold and corrosion

Yu. D. Morozov, V. N. Zikeev, N. V. Filatov

01.09.2009

Magnetometric scanning as a method of diagnosing pipe metal during delayed fracture

A. B. Korostelev, D. A. Chumak-Jun, M. I. Alishin, L. Yu. Chuprakova

01.09.2009

Energy parameters of ferrosilicon production with larger-than-normal values for the electrode gap and electrode spacing under factory conditions*

A. P. Shkirmontov

01.09.2009

Principles of controlling crystallization kinetics for a multicomponent coating on steel

A. V. Emel’yanov, S. Yu. Sapunov, O. V. Kudryakov

Springer Professional

Metallurgist

Ausgabe 9-10/2009

Inhaltsverzeichnis (19 Artikel)

Analysis of the behavior of alkalis in a blast furnace

Increase in the level of mechanical and other service properties of automobile sheet steels by controlling precipitation of nonmetallic excess phases

Energy- and resource-saving technology for performing hydraulic tests on the pipes of large central heating systems

Express evaluation of an index characterizing the contact fatigue strength of railroad rails

Thermal stresses in the work rolls of hot-strip mills

Mechanical properties of antifriction iron-manganese alloys on a metastable base

Deformation of the skin of a continuous-cast slab in the mold of the caster

Effect of carbon and small concentrations of nonferrous metal impurities on continuously-cast billet quality

Improving chemical homogeneity and the stability of the mechanical characteristics in large products made for machine construction

Effect of secondary electrospark treatment with carbon-bearing materials on the properties of titanium alloys

Kinetics of the leaching of gold from tailings from the beneficiation of chrysotile-asbestos ores

Improving steel deoxidation technology with the use of data on the activity of dissolved oxygen

Developing a theory of the refining of metal in tundishes based on postulates of fluid mechanics

Study of transients in metal-shaping

Analysis of the effect of deformation scheme on the quality of axle steel at the nizhniy tagil metallurgical combine

Development of coiled steels for electric-welded (HFC) oil and gas line pipe, casing, and pump-compressor tubing with high strength and good resistance to cold and corrosion

Magnetometric scanning as a method of diagnosing pipe metal during delayed fracture

Energy parameters of ferrosilicon production with larger-than-normal values for the electrode gap and electrode spacing under factory conditions*

Principles of controlling crystallization kinetics for a multicomponent coating on steel

Aktuelle Ausgaben

Ausgabe 3-4/2022

Ausgabe 1-2/2022

Ausgabe 11-12/2022

Ausgabe 9-10/2022

Ausgabe 7-8/2021

Ausgabe 5-6/2021

Ausgabe 3-4/2021

Ausgabe 1-2/2021

Ausgabe 11-12/2021

Ausgabe 9-10/2021

Premium Partner

Marktübersichten