Metallurgist 9-10/2014

01.01.2014

Pneumothermal Forming of Corrugated Structures from Sheet in the Superplastic Regime

V. V. Mironenko, A. V. Kolesnikov, N. V. Maksimenko, A. S. Stanislavchik, V. V. Kotov

01.01.2014

Evaluating the Carbon Footprint from the Production of Steel in an Electric-Arc Furnace

Yu. N. Chesnokov, V. G. Lisienko, A. V. Lapteva

01.01.2014

Technological Solutions for Saving Energy and Reducing the Capital Intensity of Gas-Removal and Gas-Cleaning Systems at Aluminum Factories

V. V. Kondrat’ev, V. N. Nikolaev, E. P. Rzhechitskii, M. V. Kornyakov, A. D. Afanas’ev

01.01.2014

Effect of Introducing Different Sizes of Nut Coke Into the Ore Layer on the Degree of Reduction of Iron Oxides*

A. V. Kuzin

01.01.2014

Operation of Blast Furnaces at the Azovstal Metallurgical Combine with a Uniform Circumferential Distribution of the Charge and the Gases

R. S. Sidorchuk, A. N. Batishchev, E. O. Tskitishvili, V. P. Tarasov, R. V. Koval’chik, S. V. Krivenko, D. I. Gavriloglu

01.01.2014

Improving the Charging and Blast Regimes on Blast Furnaces at the Azovstal Metallurgical Combine

D. A. Tonkikh, S. A. Karikov, A. K. Tarakanov, R. V. Koval’chik, A. S. Kostomarov

01.01.2014

Improving the Design of the Oxygen Lance and the Blowing Regime for BOF Steelmaking in the BOF Shop at the Azovstal Metallurgical Combine

A. V. Sushchenko, E. O. Tskitishvili, R. S. Sidorchuk, N. N. Ligus, M. P. Orlichenko

01.01.2014

Rational Deoxidation as a Method for Controlling Nonmetallic Phase Formation in High-Carbon Steel

B. S. Ivanov, K. A. Semerikov, I. P. Shabalov, G. A. Filippov

01.01.2014

Reduction in Slab Surface Corner Crack Damage due to Development of Rational Secondary Cooling Regimes

A. Yu. Tsuprun, A. V. Fedosov, D. V. Pashchuk, E. O. Tskitishvili, V. V. Ottsevich

01.01.2014

Evaluating the Adequacy of a Mathematical Model of the Piercing of a Billet Into an Ultra-Thick-Walled Shell on a Two-High Rotary Rolling Mill

V. P. Romanenko, D. V. Sizov

01.01.2014

Accelerated Cooling After Controlled Rolling During Heavy Plate Pipe Steel Manufacture in 3600 Mill at the Azovstal Metallurgical Combine

Yu. I. Matrosov, E. O. Tskitishvili, E. S. Popov, G. N. Konovalov, A. A. Kholodnyi

01.01.2014

Improvement of Railway Rail Manufacturing Technology

A. S. Rudyuk, A. A. Azarkevich, R. S. Sidorchuk, A. V. Karmazin, I. M. Koshulé

01.01.2014

Introduction of Three-Stage Thermal Hardening Technology for Large Diameter Grinding Balls

V. G. Efremenko, E. S. Popov, S. O. Kuz’min, O. I. Trufanova, A. V. Efremenko

01.01.2014

Effect of Microalloying Elements on the Structure and Phase Stability and Properties of Heat-Resistant Deformable Alloy (with Long Operating Times)

B. S. Lomberg, M. M. Bakradze, E. B. Chabina, E. V. Filonova

01.01.2014

Recycling of Burned Dolomite Powder in Steelmaking

Yuanpei Lan, Qingcai Liu, Guofang Wu, Jian Yang, Minren Xu, Wanzhong Ao, Qianxiang Chen

01.01.2014

Study of the High-Temperature Reduction of Ore-Coal Extrusion Briquettes (Brex)

A. M. Bizhanov, I. F. Kurunov, A. V. Pavlov, O. V. Chadaeva, P. S. Chizhov

01.01.2014

Reducing Heat Loss Through the Surface of Blast-Furnace Tuyeres

N. L. Kirillova, A. G. Radyuk, A. E. Titlyanov

01.01.2014

Selection of Coal Gasification Parameters for Injection of Gasification Products Into a Blast Furnace

I. G. Tovarovsky, A. E. Merkulov

01.01.2014

The Design of a Continuous Casting Machine for Production of Quality Billets from Steels With a Wide Range of Grades

S. Yu. Boyko, V. I. Karatsuba, D. N. Shevenionov, A. V. Kuklev, A. M. Longinov, V. V. Tinyakov, V. L. Danilov

01.01.2014

Nonaxial Segregation and the Effect of Thermal Factors on it During the Crystallization of Large Ingots of Cr–Ni–Mo Steels

S. S. Konovalov, N. A. Zyuban, D. V. Rutskii, S. B. Gamanyuk, A. Ya. Puzikov

01.01.2014

Method of Calculating the Speed Regime for Continuous Pipe Rolling

Yu. G. Gulyaev, E. I. Shifrin

01.01.2014

Comparison of Weldability of High-Strength Pipe Steels Microalloyed with Niobium, Niobium and Vanadium

A. V. Nazarov, E. V. Yakushev, I. P. Shabalov, Yu. D. Morozov, T. S. Kireeva

01.01.2014

Assimilation of Production of High-Strength Wear-Resistant Weldable Steel with Yield Strength of more than 950 N/mm2 for Supporting Metal Structures

O. P. Talanov, S. Yu. Nastich, V. N. Nikitin, S. V. Denisov, O. P. Shiryaev, E. A. Kudryakov, D. I. Bogach, A. I. Traino, V. S. Kurash

01.01.2014

Hydrogen Emission from Steel 40KhGM at Elevated Temperature

A. D. Shaburov, V. I. Khyakkinen, D. A. Mirzaev

01.01.2014

Comparative Analysis of the Durability of Solid-Forged and Bimetallic Backup Rolls on Rolling Mills

A. M. Pokrovskii

01.01.2014

Powder Compaction Phenomenology for Composite Materials based on Tungsten and Carbon

M. N. Samodurova, L. A. Barkov, S. A. Mymrin, V. A. Ivanov, Yu. A. Kanatnikova

01.01.2014

Developing and Using Alternative Methods of Continuous Casting to Make a Narrow Range of High-Temperature Solders

S. A. Tavolzhanskii, I. N. Pashkov, K. F. Koletvinov

01.01.2014

Isothermal Deformation of Heat-Resistant Alloys

O. G. Ospennikova, B. S. Lomberg, N. V. Moiseev, D. V. Kapitanenko

01.01.2014

Improving the Blast Supply in the Conversion of Copper-Nickel Mattes

G. V. Konovalov, V. Yu. Bazhin, A. K. Nikolaev

Springer Professional

Inhaltsverzeichnis (29 Artikel)

Pneumothermal Forming of Corrugated Structures from Sheet in the Superplastic Regime

Evaluating the Carbon Footprint from the Production of Steel in an Electric-Arc Furnace

Technological Solutions for Saving Energy and Reducing the Capital Intensity of Gas-Removal and Gas-Cleaning Systems at Aluminum Factories

Effect of Introducing Different Sizes of Nut Coke Into the Ore Layer on the Degree of Reduction of Iron Oxides*

Operation of Blast Furnaces at the Azovstal Metallurgical Combine with a Uniform Circumferential Distribution of the Charge and the Gases

Improving the Charging and Blast Regimes on Blast Furnaces at the Azovstal Metallurgical Combine

Improving the Design of the Oxygen Lance and the Blowing Regime for BOF Steelmaking in the BOF Shop at the Azovstal Metallurgical Combine

Rational Deoxidation as a Method for Controlling Nonmetallic Phase Formation in High-Carbon Steel

Reduction in Slab Surface Corner Crack Damage due to Development of Rational Secondary Cooling Regimes

Evaluating the Adequacy of a Mathematical Model of the Piercing of a Billet Into an Ultra-Thick-Walled Shell on a Two-High Rotary Rolling Mill

Accelerated Cooling After Controlled Rolling During Heavy Plate Pipe Steel Manufacture in 3600 Mill at the Azovstal Metallurgical Combine

Improvement of Railway Rail Manufacturing Technology

Introduction of Three-Stage Thermal Hardening Technology for Large Diameter Grinding Balls

Effect of Microalloying Elements on the Structure and Phase Stability and Properties of Heat-Resistant Deformable Alloy (with Long Operating Times)

Recycling of Burned Dolomite Powder in Steelmaking

Study of the High-Temperature Reduction of Ore-Coal Extrusion Briquettes (Brex)

Reducing Heat Loss Through the Surface of Blast-Furnace Tuyeres

Selection of Coal Gasification Parameters for Injection of Gasification Products Into a Blast Furnace

The Design of a Continuous Casting Machine for Production of Quality Billets from Steels With a Wide Range of Grades

Nonaxial Segregation and the Effect of Thermal Factors on it During the Crystallization of Large Ingots of Cr–Ni–Mo Steels

Method of Calculating the Speed Regime for Continuous Pipe Rolling

Comparison of Weldability of High-Strength Pipe Steels Microalloyed with Niobium, Niobium and Vanadium

Assimilation of Production of High-Strength Wear-Resistant Weldable Steel with Yield Strength of more than 950 N/mm2 for Supporting Metal Structures

Hydrogen Emission from Steel 40KhGM at Elevated Temperature

Comparative Analysis of the Durability of Solid-Forged and Bimetallic Backup Rolls on Rolling Mills

Powder Compaction Phenomenology for Composite Materials based on Tungsten and Carbon

Developing and Using Alternative Methods of Continuous Casting to Make a Narrow Range of High-Temperature Solders

Isothermal Deformation of Heat-Resistant Alloys

Improving the Blast Supply in the Conversion of Copper-Nickel Mattes

Aktuelle Ausgaben

Ausgabe 1-2/2022

Ausgabe 11-12/2022

Ausgabe 9-10/2022

Ausgabe 7-8/2021

Ausgabe 5-6/2021

Ausgabe 3-4/2021

Ausgabe 1-2/2021

Ausgabe 11-12/2021

Ausgabe 9-10/2021

Ausgabe 7-8/2020

Premium Partner

Marktübersichten