Ausgabe 5/2023
Inhalt (22 Artikel)
Focused Review on Cu–Ni–Sn Spinodal Alloys: From Casting to Additive Manufacturing
Bipin Sankar, Chaitanya Vinay, Jithin Vishnu, Karthik V. Shankar, G. P. Gokul Krishna, V. Govind, A. J. Jayakrishna
Duplex and Composite Coatings: A Thematic Review on Thermal Spray Techniques and Applications
M. Sathish, N. Radhika, Bassiouny Saleh
Microstructure and Properties of a Low Carbon Bainitic Steel Produced by Conventional and Inverted Two-Step Austempering Processes
Junyu Tian, Wei Wang, Guang Xu, Xiang Wang, Mingxing Zhou, Hatem Zurob
Effect of a Stress Relief Heat Treatment of AlSi7Mg and AlSi10Mg Alloys on Mechanical and Electrical Properties According to Silicon Precipitation
Woo Jin Hwang, Gyung Bae Bang, Sung-Hoon Choa
Mechanism of Ductility Enhancement of the Mg-8Gd-4Y-1Nd-0.5Si Alloy by Multi-Directional Forging Process before Extrusion
Manfa Yuan, Jin Zhang, Yunlai Deng, Xiaobin Guo, Liqun Guan
Prediction of Creep Life Using an Explainable Artificial Intelligence Technique and Alloy Design Based on the Genetic Algorithm in Creep-Strength-Enhanced Ferritic 9% Cr Steel
Byeong Ook Kong, Min Soo Kim, Byung Hoon Kim, Je Hyun Lee
Comparison of Creep Fracture Behavior Between Selective Laser Melted and Forged Alloy 230 After Testing at 1200 °C
Yijiang Zeng, Yu Pan, Ning Wang, Jian Chen, Xianhui Cai
Effect of Mg12Nd and Mg3Nd On the Corrosion Behavior of Mg‒3 wt%Nd Alloy in Saline Solution
Kaihua Yuan, Jianfeng Wang, Yufeng Sun, Shijie Zhu, Hairong Liu, Shaokang Guan
Characteristics of the Cold-Rolled Multi-Phase Cr30Fe30Ni15Co10Cu10Ti5 High-Entropy Alloy
Ahad Rezaee, Mostafa Ketabchi, Seyed Amir Arsalan Shams, Hamid Reza Jafarian, Chong Soo Lee
Initial Report on the Oriented-precipitation of T1-Phase in Creep-Aged Al-Cu-Li Single Crystal
Wei Hu, Jiqiang Chen, Shuang Han, Jinjun Xu, Jiale Miao, Ting Xing, Renguo Guan
Strengthening CoCrFeNi High Entropy Alloy by In-Situ Phases of Laves and ZrC
Xiugang Chen, Gang Qin, Xuefeng Gao, Ruirun Chen, Qiang Song, Hongzhi Cui
Phenomenological Modeling of Distortions and Residual Stresses in Direct Energy Deposition of AISI M4 High Speed Tool Steel on D2 Substrate
Kyeongsik Ha, Young Hoon Moon, Tae Hwan Kim, Gyeong Yun Baek, Ki Yong Lee, Do-sik Shim, Wookjin Lee
Mechanical and Microstructural Characterization of the Bond Interface Formed in Diffusion Welding of CoCrNi Medium Entropy Alloy (MEA) and AISI 304 Stainless Steel Under Various Processing Parameters
Muhammad Samiuddin, Jinglong Li, Muhammad Muzamil, Sumair Uddin, Jiangtao Xiong
Microstructure, Thermal Behavior and Tensile Properties of Laser Welded Bottom-Locking Joint for TA15 Titanium Alloy
Jiayao Wang, Jianfeng Wang, Yanqiu Zhao, Yue Li, Xiaohong Zhan
Gradient Nanotwinned Structure and Its Formation Mechanism in Inconel 625 Alloy Produced by Surface Mechanical Grinding Treatment
Yuanjun Ma, Yutian Ding, Yubi Gao, Jianjun Chen, Xingmao Wang
Effect of Interface on Mechanical Properties and Stamping Formability of Ti/Al Multilayered Composites
Miao Cao, Hui-Qin Chen, Kun‐Kun Deng, Xing-Wang Duan, Shuang Liu, Xin Che, Fei Li
Microstructural Evolution and Mechanical Properties of Semi-Solid Al15Mg45Li39Ca0.5Si0.5 Light-Weight High Entropy Alloys Fabricated by Isothermal Heat Treatment
Yong Hu, Fei Liu, Longzhi Zhao, Yanchuan Tang, Haitao Jiao
Hydrogen-Free Active Screen Plasma Nitriding of AISI 316 L Stainless Steel
A. S. Grenadyorov, V. O. Oskirko, A. N. Zakharov, I. M. Goncharenko, V. A. Semenov, S. V. Rabotkin, A. A. Solovyev
High-Performance Self-Expanding NiTi Stents Manufactured by Laser Powder Bed Fusion
Xiang Li, Shijie Hao, Baopeng Du, Bo Feng, Haohang Li, Ping Qiu, Bingmin Huang, Lishan Cui, Ying Yang
Preparation and Damage Study of CoCrFeNiMo0.2 High Entropy Alloy Reinforced Titanium Matrix Composites
Zhanwei Yuan, Huan Liu, Zhe Ma, Xinkai Ma, Kai Wang, Xuemin Zhang
CoNi Nanoparticles with Different Compositions Using a Polyol Method for a Microwave Absorber in High-Frequency Bands
Jong-Hwan Park, Drew Ahn, Jae Chul Ro, Su-Jeong Suh
Direct Laser Deposition of Austenitic and Martensitic Steel Gradient Layers
R. V. Mendagaliev, D. D. Evdokimov, A. M. Firsov, A. M. Vildanov, A. D. Evstifeev, V. I. Maksimochkin, R. A. Grachev, O. N. Dubinin, S. A. Evlashin, O. G. Klimova-Korsmik
