Ausgabe 6/2010
Inhalt (25 Artikel)
High temperature gas nitriding and tempering in 17Cr-1Ni-0.5C-0.4V steel
J. H. Kong, D. J. Lee, H. Y. On, S. J. Park, S. K. Kim, C. Y. Kang, J. H. Sung, H. W. Lee
Growth behavior of ferrite allotriomorphs nucleated on grain boundary faces in a low carbon steel
X. L. Wan, L. Cheng, K. M. Wu
Effect of silicon on the spheroidization of cementite in hypereutectoid high carbon chromium bearing steels
Kwan-Ho Kim, Jae-Seung Lee, Duk-Lak Lee
Icosahedral medium-range orders and backbone formation in an amorphous alloy
Mirim Lee, Hong-Kyu Kim, Jae-Chul Lee
Development of Cu-bearing bake-hardenable steel sheets for automotive exposed panels
Moon-Hi Hong, Noi-Ha Cho, Sung-Il Kim, Ohjoon Kwon, Sung-Hwan Lim, Won-Jin Moon
Effect of hot-forging on mechanical properties of silicon carbide sintered with Al2O3-Y2O3-MgO
Myong-Hoon Roh, Wonjoong Kim, Young-Wook Kim, Min-Hyung Choi
Hot-air forming of Al-Mg-Cr alloy and prediction of failure based on Zener-Holloman parameter
W. J. Kim, W. Y. Kim, H. K. Kim
Effects of deformation-induced martensite and grain size on ductile-to-brittle transition behavior of austenitic 18Cr-10Mn-N stainless steels
Byoungchul Hwang, Tae-Ho Lee, Sung-Joon Kim
Effect of mold flux melting and crystal fraction dissolution on radiative heat transfer in continuous casting
Wanlin Wang, Lejun Zhou, Gu Kezhuan
Temperature-dependent structural and transport properties of liquid transition metals
Sui Yang, Xuping Su, Jianhua Wang, Nai-Yong Tang
Microstructural analyses of two high noble gold-platinum alloys before and after conditioning in a cell culture medium
R. Rudolf, I. Anzel, L. Gusel, D. Stamenkovi, A. Todorovi, M. Colic
Characteristics of Fe powders prepared by spray pyrolysis from various types of Fe precursors as a heat pellet material
H. Y. Koo, J. H. Kim, S. K. Hong, J. M. Han, Y. N. Ko, Y. C. Kang, S. H. Kang, S. B. Cho
Effects of bending fatigue on the electrical resistance in metallic films on flexible substrates
Ho-Young Lee, Seol-Min Yi, Ji-Hoon Lee, Hwan-Soo Lee, Seungmin Hyun, Young-Chang Joo
Effects of atomic layer deposition temperatures on structural and electrical properties of ZnO films and its thin film transistors
Su Cheol Gong, Seokhwan Bang, Hyeongtag Jeon, Hyung-Ho Park, Young Chul Chang, Ho Jung Chang
Effects of thermal stress induced by cyclic heat treatment on sintered (Nd, Dy)-Fe-B magnets
Se Hoon Kim, Hoon-sup Kim, Young Jung Lee, Dae-Gun Kim, Young Do Kim
Effects of welding parameters and surface pretreatments on resistance spot welding of AZ31B Mg alloy
Shiquan Zhou, Lei Liu, Jae Pil Jung, Mok-Young Lee, Y. Norman Zhou
Selection of optimal welding condition for GTA pulse welding in root-pass of V-groove butt joint
Seok-Chul Yun, Jae-Woong Kim
Intergranular cracking susceptibility of 2.25Cr1.3W and 9Cr1MoVNb weld metals at elevated temperatures
J. C. Chang, N. H. Heo, C. H. Lee
Synthesis and electrochemical characteristics of Fe-P alloy prepared by electrothermal reduction method
Meng Zhao, Gui-Xin Wang, Xiu-Li Li, Rui Liu, Fei Wang, Kang-Ping Yan
The optimization of hot press bending for improving dimensional accuracy and mechanical strength of bent product
Hong-seok Choi, Ki-ju Nam, Woo-seung Lim, Dae-Cheol Ko, Byung-Min Kim
The analysis of variance on process parameters affecting the microstructures of semi-solid Al-Zn-Mg alloy billet by cooling plate method
Sung-Yong Shim, Dae-Hwan Kim, Seung-Hwa Chio, Yeong-Hwa Kim, He Bai, Su-Gun Lim
Characteristics of 3D microstructures fabricated using a modified LIFT process
Bong-Gu Lee, Jun Hee Moon
Improvement of the critical current density and upper critical field in C-doped MgB2 wire using cellulose acetate
Soo Min Hwang, Chang Min Lee, Won Kim, Geun Chul Park, Jinho Joo, Jun Hyung Lim, Won Nam Kang, Yeung Soon Park, Dong Ho Kim