Metals and Materials International 6/2018

09.06.2018

A Novel Method to Calculate the Carbides Fraction from Dilatometric Measurements During Cooling in Hot-Work Tool Steel

Xiaoli Zhao, Chuanwei Li, Lizhan Han, Jianfeng Gu

17.05.2018

Effect of Ni Addition on Bainite Transformation and Properties in a 2000 MPa Grade Ultrahigh Strength Bainitic Steel

Junyu Tian, Guang Xu, Zhengyi Jiang, Haijiang Hu, Mingxing Zhou

29.06.2018

Effects of Cr and Fe Addition on Microstructure and Tensile Properties of Ti–6Al–4V Prepared by Direct Energy Deposition

Yool Byun, Sangwon Lee, Seong-Moon Seo, Jong-taek Yeom, Seung Eon Kim, Namhyun Kang, Jaekeun Hong

02.08.2018

Effect of Strain Aging on Tensile Behavior and Properties of API X60, X70, and X80 Pipeline Steels

Sang-In Lee, Seung-Yong Lee, Seok Gyu Lee, Hwan Gyo Jung, Byoungchul Hwang

05.05.2018

Corrosion Properties of Dissimilar Friction Stir Welded 6061 Aluminum and HT590 Steel

Bosung Seo, Kuk Hyun Song, Kwangsuk Park

09.05.2018

Effect of Al and Mg Contents on Wettability and Reactivity of Molten Zn–Al–Mg Alloys on Steel Sheets Covered with MnO and SiO2 Layers

Joo-Youl Huh, Min-Je Hwang, Seung-Woo Shim, Tae-Chul Kim, Jong-Sang Kim

08.06.2018

High Temperature Deformation Behavior of Al–Zn–Mg-Based New Alloy Using a Dynamic Material Model

Bong Jung Jang, Hyun Soon Park, Mok-Soon Kim

04.05.2018

Optimum Combination of Thermoplastic Formability and Electrical Conductivity in Al–Ni–Y Metallic Glass

Min Young Na, Sung Hyun Park, Kang Cheol Kim, Won Tae Kim, Do Hyang Kim

11.05.2018

High-Efficiency Inhibition of Gravity Segregation in Al–Bi Immiscible Alloys by Adding Lanthanum

Peng Jia, Jinyang Zhang, Haoran Geng, Xinying Teng, Degang Zhao, Zhongxi Yang, Yi Wang, Song Hu, Jun Xiang, Xun Hu

10.05.2018

Influences on Distribution of Solute Atoms in Cu-8Fe Alloy Solidification Process Under Rotating Magnetic Field

Jin Zou, Qi-Jie Zhai, Fang-Yu Liu, Ke-Ming Liu, De-Ping Lu

11.06.2018

Microstructural Investigation of CoCrFeMnNi High Entropy Alloy Oxynitride Films Prepared by Sputtering Using an Air Gas

Duc Duy Le, Soon-Ku Hong, Trong Si Ngo, Jeongkuk Lee, Yun Chang Park, Sun Ig Hong, Young-Sang Na

25.05.2018

Temperature-Dependent Thermal and Chemical Stabilities as well as Mechanical Properties of Electrodeposited Nanocrystalline Ni

Liangfu Zheng, Xiao Peng

05.05.2018

Enhanced Densification and Hardness of Titanium Bodies Sintered by Advanced Hydrogen Sintering Process

Jung-Min Oh, Ja-Geon Koo, Jae-Won Lim

08.06.2018

Experimental Verification of the Decomposition of Y2O3 in Fe-Based ODS Alloys During Mechanical Alloying Process

Jong Min Byun, Chun Woong Park, Young Do Kim

05.05.2018

Ultrasonic Vibration and Rheocasting for Refinement of Mg–Zn–Y Alloy Reinforced with LPSO Structure

Shulin Lü, Xiong Yang, Liangyan Hao, Shusen Wu, Xiaogang Fang, Jing Wang

08.05.2018

Synthesis of TiCx Powder via the Underwater Explosion of an Explosive

Shigeru Tanaka, Ivan Bataev, Hideki Hamashima, Akihiko Tsurui, Kazuyuki Hokamoto

08.06.2018

High-Temperature Deformation Behavior of MnS in 1215MS Steel

Fei-Ya Huang, Yen-Hao Frank Su, Jui-Chao Kuo

18.08.2018

Effects of Solution Treatment Temperatures on Microstructure and Mechanical Properties of TIG–MIG Hybrid Arc Additive Manufactured 5356 Aluminum Alloy

Wei Zuo, Le Ma, Yu Lu, Shu-yong Li, Zhiqiang Ji, Min Ding

08.06.2018

Characterization of Microstructure and Mechanical Properties of Mg–8Li–3Al–1Y Alloy Subjected to Different Rolling Processes

Xiao Zhou, Qiang Liu, Ruirui Liu, Haitao Zhou

31.05.2018

Effect of Asymmetric Hot Rolling on the Texture Evolution of Fe–3%Si Steel

Tae-Wook Na, Hyung-Ki Park, Chang-Soo Park, Hyung-Don Joo, Jong-Tae Park, Heung Nam Han, Nong-Moon Hwang

15.06.2018

Microstructure-Strengthening Interrelationship of an Ultrasonically Treated Hypereutectic Al–Si (A390) Alloy

Soo-Bae Kim, Young-Hee Cho, Jae-Gil Jung, Woon-Ha Yoon, Young-Kook Lee, Jung-Moo Lee

27.06.2018

Solubility of TiO2 in NaF-CaF2-BaF2 Melts

Jeong-Hyun Yoo, Sung-Wook Cho

21.05.2018

Mechanism of MnS Precipitation on Al2O3–SiO2 Inclusions in Non-oriented Silicon Steel

Fangjie Li, Huigai Li, Di Huang, Shaobo Zheng, Jinglin You

11.06.2018

Development of an Mg-Based Alloy with a Hydrogen-Storage Capacity over 6 wt% by Adding Graphene

Eunho Choi, Young Jun Kwak, Myoung Youp Song

09.05.2018

Effects of Grain Size on the Fatigue Properties in Cold-Expanded Austenitic HNSs

Jong-Ho Shin, Young-Deak Kim, Jong-Wook Lee

08.06.2018

Influence of Cooling Condition of Casted Strips on Magnetic Properties of Nd–Fe–B Sintered Magnets

Hwaebong Jung, Sumin Kim, Hongjae Moon, Yoon S. Oh, Young-Joo Lee, Hyun-Sook Lee, Wooyoung Lee

04.05.2018

Edge-Cracking Behavior of CoCrFeMnNi High-Entropy Alloy During Hot Rolling

Jong Woo Won, Minju Kang, Heoun-Jun Kwon, Ka Ram Lim, Seong Moon Seo, Young Sang Na

Springer Professional

Inhaltsverzeichnis (27 Artikel)

A Novel Method to Calculate the Carbides Fraction from Dilatometric Measurements During Cooling in Hot-Work Tool Steel

Effect of Ni Addition on Bainite Transformation and Properties in a 2000 MPa Grade Ultrahigh Strength Bainitic Steel

Effects of Cr and Fe Addition on Microstructure and Tensile Properties of Ti–6Al–4V Prepared by Direct Energy Deposition

Effect of Strain Aging on Tensile Behavior and Properties of API X60, X70, and X80 Pipeline Steels

Corrosion Properties of Dissimilar Friction Stir Welded 6061 Aluminum and HT590 Steel

Effect of Al and Mg Contents on Wettability and Reactivity of Molten Zn–Al–Mg Alloys on Steel Sheets Covered with MnO and SiO2 Layers

High Temperature Deformation Behavior of Al–Zn–Mg-Based New Alloy Using a Dynamic Material Model

Optimum Combination of Thermoplastic Formability and Electrical Conductivity in Al–Ni–Y Metallic Glass

High-Efficiency Inhibition of Gravity Segregation in Al–Bi Immiscible Alloys by Adding Lanthanum

Influences on Distribution of Solute Atoms in Cu-8Fe Alloy Solidification Process Under Rotating Magnetic Field

Microstructural Investigation of CoCrFeMnNi High Entropy Alloy Oxynitride Films Prepared by Sputtering Using an Air Gas

Temperature-Dependent Thermal and Chemical Stabilities as well as Mechanical Properties of Electrodeposited Nanocrystalline Ni

Enhanced Densification and Hardness of Titanium Bodies Sintered by Advanced Hydrogen Sintering Process

Experimental Verification of the Decomposition of Y2O3 in Fe-Based ODS Alloys During Mechanical Alloying Process

Ultrasonic Vibration and Rheocasting for Refinement of Mg–Zn–Y Alloy Reinforced with LPSO Structure

Synthesis of TiCx Powder via the Underwater Explosion of an Explosive

High-Temperature Deformation Behavior of MnS in 1215MS Steel

Effects of Solution Treatment Temperatures on Microstructure and Mechanical Properties of TIG–MIG Hybrid Arc Additive Manufactured 5356 Aluminum Alloy

Characterization of Microstructure and Mechanical Properties of Mg–8Li–3Al–1Y Alloy Subjected to Different Rolling Processes

Effect of Asymmetric Hot Rolling on the Texture Evolution of Fe–3%Si Steel

Microstructure-Strengthening Interrelationship of an Ultrasonically Treated Hypereutectic Al–Si (A390) Alloy

Solubility of TiO2 in NaF-CaF2-BaF2 Melts

Mechanism of MnS Precipitation on Al2O3–SiO2 Inclusions in Non-oriented Silicon Steel

Development of an Mg-Based Alloy with a Hydrogen-Storage Capacity over 6 wt% by Adding Graphene

Effects of Grain Size on the Fatigue Properties in Cold-Expanded Austenitic HNSs

Influence of Cooling Condition of Casted Strips on Magnetic Properties of Nd–Fe–B Sintered Magnets

Edge-Cracking Behavior of CoCrFeMnNi High-Entropy Alloy During Hot Rolling

Aktuelle Ausgaben

Ausgabe 3/2023

Ausgabe 2/2023

Ausgabe 1/2023

Ausgabe 12/2022

Ausgabe 11/2022

Ausgabe 10/2022

Ausgabe 9/2022

Ausgabe 8/2022

Ausgabe 7/2022

Ausgabe 6/2022

Premium Partner

Marktübersichten