Skip to main content
Erschienen in: The International Journal of Advanced Manufacturing Technology 9-12/2019

19.05.2019 | ORIGINAL ARTICLE

Micro-drilling of AISI 1045 steel using a centering micro-drill

verfasst von: Haoqiang Zhang, Song Zhao, Lina Wang, Chao Li, Suoxia Hou

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 9-12/2019

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Micro-hole drilling is experiencing a very rapid growth in precision production industries. The micro-drills play a critical role in manufacturing industry. There are many factors which influence the micro-drill performance including the drill point geometry, the drill material, and the workpiece material, among which the most fundamental factor is the drill point geometry. In this paper, a new micro-drill point geometry, termed the centering micro-drill point, is developed. A mathematical model for this new micro-drill point has been established. Micro-drilling tests in AISI 1045 steel are performed with different cutting conditions. By contrasting centering micro-drill and planar drill point micro-drill, the cutting performance of the centering micro-drill has been investigated. The results showed that, when the cutting speed is 35 m/min and the feed rate is 44 mm/min, the thrust force of the centering micro-drill reduces by 21.7% than that of planar micro-drill and the drilling hole amounts increase by 13.5%. The roundness of the thirtieth hole drilled by centering micro-drill is 1.02, and it is 1.08 by planar micro-drill; the centering micro-drill has better position accuracy than planar micro-drill, and further gets good size and shape accuracy.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Schmidt J, Spath D, Elsner J (2002) Requirements of an industrially applicable microcutting process for steel micro-structures. Microsyst Technol 8(6):402–408CrossRef Schmidt J, Spath D, Elsner J (2002) Requirements of an industrially applicable microcutting process for steel micro-structures. Microsyst Technol 8(6):402–408CrossRef
2.
Zurück zum Zitat Alting L, Kimura F, Hansen HN, Bissacco G (2003) Micro Engineering. CIRP Ann-Manuf Techn 52(2):635–657CrossRef Alting L, Kimura F, Hansen HN, Bissacco G (2003) Micro Engineering. CIRP Ann-Manuf Techn 52(2):635–657CrossRef
3.
Zurück zum Zitat Sambhav K, Tandon P, Kapoor SG, Dhande SG (2013) Mathematical modeling of cutting forces in micro-drilling. J Manuf Sci E-T ASME 135(1):014501–1-014501-8CrossRef Sambhav K, Tandon P, Kapoor SG, Dhande SG (2013) Mathematical modeling of cutting forces in micro-drilling. J Manuf Sci E-T ASME 135(1):014501–1-014501-8CrossRef
4.
Zurück zum Zitat Fu LY, Guo Q (2010) Development of an ultra-small micro-drill bit for packaging substrates. Circuit World 36(3):23–27CrossRef Fu LY, Guo Q (2010) Development of an ultra-small micro-drill bit for packaging substrates. Circuit World 36(3):23–27CrossRef
5.
Zurück zum Zitat Routio M, Saynatjoki M (1995) Tool wear and failure in the drilling of stainless steel. J Mater Process Tech 52(1):35–43CrossRef Routio M, Saynatjoki M (1995) Tool wear and failure in the drilling of stainless steel. J Mater Process Tech 52(1):35–43CrossRef
6.
Zurück zum Zitat Kalidas S, Devor RE, Kapoor SG (2001) Experimental investigation of the effect of drilling coatings on hole quality under dry and wet drilling conditions. Surf Coat Tech 148(2–3):117–128CrossRef Kalidas S, Devor RE, Kapoor SG (2001) Experimental investigation of the effect of drilling coatings on hole quality under dry and wet drilling conditions. Surf Coat Tech 148(2–3):117–128CrossRef
7.
Zurück zum Zitat Lin C, Kang SK, Ehmann KF (1992) Planar micro-drill point design and grinding methods. Transactions of NAMRI/SME XX:173–179 Lin C, Kang SK, Ehmann KF (1992) Planar micro-drill point design and grinding methods. Transactions of NAMRI/SME XX:173–179
8.
Zurück zum Zitat Kang SK, Lin C, Ehmann KF (1993) Comparative analysis planar and helical micro-drill points. Transactions of NAMRI/SME XXI:189–196 Kang SK, Lin C, Ehmann KF (1993) Comparative analysis planar and helical micro-drill points. Transactions of NAMRI/SME XXI:189–196
9.
Zurück zum Zitat Lin C, Kang SK, Ehmann KF (1997) Helical micro-drill point design and grinding. J Eng Ind Trans ASME 117(8):277–287 Lin C, Kang SK, Ehmann KF (1997) Helical micro-drill point design and grinding. J Eng Ind Trans ASME 117(8):277–287
10.
Zurück zum Zitat Onikura H, Ohnishi O, Take Y (2000) Fabrication of micro carbide tools by ultrasonic vibration grinding. CIRP Ann-Manuf Techn 49(1):257–260CrossRef Onikura H, Ohnishi O, Take Y (2000) Fabrication of micro carbide tools by ultrasonic vibration grinding. CIRP Ann-Manuf Techn 49(1):257–260CrossRef
11.
Zurück zum Zitat Egashira K, Mizutani K (2002) Micro-drilling of monocrystalline silicon using a cutting tool. Precis Eng 26(3):263–268CrossRef Egashira K, Mizutani K (2002) Micro-drilling of monocrystalline silicon using a cutting tool. Precis Eng 26(3):263–268CrossRef
12.
Zurück zum Zitat Ohnishi O, Onikura H, Hata A, Yamamoto K (2004) Fabrication of micro flat drills by precision grinding and drilling into duralumin and stainless steel with ultrasonic vibration. JSME Int J C-Mech Sy 47(1):117–122CrossRef Ohnishi O, Onikura H, Hata A, Yamamoto K (2004) Fabrication of micro flat drills by precision grinding and drilling into duralumin and stainless steel with ultrasonic vibration. JSME Int J C-Mech Sy 47(1):117–122CrossRef
13.
Zurück zum Zitat Paul A, Kapoor SG, DeVor RE (2005) Chisel edge and cutting lip shape optimization for improved twist drill point design. Int J Mach Tool Manuf 45:421–431CrossRef Paul A, Kapoor SG, DeVor RE (2005) Chisel edge and cutting lip shape optimization for improved twist drill point design. Int J Mach Tool Manuf 45:421–431CrossRef
14.
Zurück zum Zitat Fu LY, Yang F (2008) A solution for PCB drilling with strict requirement on hole wall quality. Circuit World 34(2):8–11CrossRef Fu LY, Yang F (2008) A solution for PCB drilling with strict requirement on hole wall quality. Circuit World 34(2):8–11CrossRef
15.
Zurück zum Zitat Fu LY, Li XG, Guo Q (2010) Development of a micro-drill bit with a high aspect ratio. Circuit World 36(4):30–34CrossRef Fu LY, Li XG, Guo Q (2010) Development of a micro-drill bit with a high aspect ratio. Circuit World 36(4):30–34CrossRef
16.
Zurück zum Zitat Egashira K, Hosono S, Takemoto S, Masao Y (2011) Fabrication and cutting performance of cemented tungsten carbide micro-cutting tools. Precis Eng 35(4):547–553CrossRef Egashira K, Hosono S, Takemoto S, Masao Y (2011) Fabrication and cutting performance of cemented tungsten carbide micro-cutting tools. Precis Eng 35(4):547–553CrossRef
17.
Zurück zum Zitat Biermann D, Heilmann M, Kirschner M (2011) Analysis of the influence of tool geometry on surface integrity in single-lip deep hole drilling with small diameters. Procedia Engineering 19(1):16–21CrossRef Biermann D, Heilmann M, Kirschner M (2011) Analysis of the influence of tool geometry on surface integrity in single-lip deep hole drilling with small diameters. Procedia Engineering 19(1):16–21CrossRef
18.
Zurück zum Zitat Aziz M, Ohnishi O, Onikura H (2012) Novel micro deep drilling using micro long flat drill with ultrasonic vibration. Precis Eng 36(1):168–174CrossRef Aziz M, Ohnishi O, Onikura H (2012) Novel micro deep drilling using micro long flat drill with ultrasonic vibration. Precis Eng 36(1):168–174CrossRef
19.
Zurück zum Zitat Lee AC, Nguyen DT, Wu GT (2014) Analyses of a new four-facet drill. Int J Adv Manuf Tech 75(1–4):411–424CrossRef Lee AC, Nguyen DT, Wu GT (2014) Analyses of a new four-facet drill. Int J Adv Manuf Tech 75(1–4):411–424CrossRef
20.
Zurück zum Zitat Heisel U, Pfeifroth T (2012) Influence of point angle on drill hole quality and machining forces when drilling CFRP. Procedia CIRP 1(1):471–476CrossRef Heisel U, Pfeifroth T (2012) Influence of point angle on drill hole quality and machining forces when drilling CFRP. Procedia CIRP 1(1):471–476CrossRef
21.
Zurück zum Zitat Chyan HC, Ehmann KF (1998) Development of curved helical micro-drill point technology for micro-hole drilling. Mechatronics 8:337–358CrossRef Chyan HC, Ehmann KF (1998) Development of curved helical micro-drill point technology for micro-hole drilling. Mechatronics 8:337–358CrossRef
22.
Zurück zum Zitat Hoshi T, Zhao H (1989) Study of a high performance drill geometry. CIRP Ann-Manuf Techn 38:87–90CrossRef Hoshi T, Zhao H (1989) Study of a high performance drill geometry. CIRP Ann-Manuf Techn 38:87–90CrossRef
23.
Zurück zum Zitat Chang DY, Lin SY (2012) Tool wear, hole characteristics, and manufacturing tolerance in alumina ceramic microdrilling process. Mater Manuf Process 27(3):306–313CrossRef Chang DY, Lin SY (2012) Tool wear, hole characteristics, and manufacturing tolerance in alumina ceramic microdrilling process. Mater Manuf Process 27(3):306–313CrossRef
24.
Zurück zum Zitat Kondo E, Shimana K (2012) Monitoring of prefailure phase and detection of tool breakage in micro-drilling operations. Procedia CIRP 1:581–586CrossRef Kondo E, Shimana K (2012) Monitoring of prefailure phase and detection of tool breakage in micro-drilling operations. Procedia CIRP 1:581–586CrossRef
Metadaten
Titel
Micro-drilling of AISI 1045 steel using a centering micro-drill
verfasst von
Haoqiang Zhang
Song Zhao
Lina Wang
Chao Li
Suoxia Hou
Publikationsdatum
19.05.2019
Verlag
Springer London
Erschienen in
The International Journal of Advanced Manufacturing Technology / Ausgabe 9-12/2019
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-019-03758-3

Weitere Artikel der Ausgabe 9-12/2019

The International Journal of Advanced Manufacturing Technology 9-12/2019 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.