Skip to main content

2008 | OriginalPaper | Buchkapitel

18. Micro/Nanorobots

verfasst von : Bradley J. Nelson, Prof, Lixin Dong, Prof, Fumihito Arai, Prof

Erschienen in: Springer Handbook of Robotics

Verlag: Springer Berlin Heidelberg

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The field of microrobotics covers the robotic manipulation of objects with dimensions in the millimeter to micron range as well as the design and fabrication of autonomous robotic agents that fall within this size range. Nanorobotics is defined in the same way only for dimensions smaller than a micron. With the ability to position and orient objects with micron- and nanometer-scale dimensions, manipulation at each of these scales is a promising way to enable the assembly of micro- and nanosystems, including micro- and nanorobots.
This chapter overviews the state of the art of both micro- and nanorobotics, outlines scaling effects, actuation, and sensing and fabrication at these scales, and focuses on micro- and nanorobotic manipulation systems and their application in microassembly, biotechnology, and the construction and characterization of micro and nanoelectromechanical systems (MEMS/NEMS). Material science, biotechnology, and micro- and nanoelectronics will also benefit from advances in these areas of robotics.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literatur
18.1.
Zurück zum Zitat R.P. Feynman: Thereʼs plenty of room at the bottom, Caltech Eng. Sci. 23, 22–36 (1960) R.P. Feynman: Thereʼs plenty of room at the bottom, Caltech Eng. Sci. 23, 22–36 (1960)
18.2.
18.3.
Zurück zum Zitat A.M. Flynn, R.A. Brooks, W.M. Wells, III, D.S. Barrett: The worldʼs largest one cubic inch robot, Proc. of IEEE 2nd Int. Workshop on Micro Electro Mechanical Systems (IEEE, Piscataway 1989) pp. 98–101 A.M. Flynn, R.A. Brooks, W.M. Wells, III, D.S. Barrett: The worldʼs largest one cubic inch robot, Proc. of IEEE 2nd Int. Workshop on Micro Electro Mechanical Systems (IEEE, Piscataway 1989) pp. 98–101
18.4.
Zurück zum Zitat W. Trimmer, R. Jebens: Actuators for micro robots, Proc. of the 1989 IEEE Int. Conf. on Robotics and Automation (IEEE, Piscataway 1989) pp. 1547–1552 W. Trimmer, R. Jebens: Actuators for micro robots, Proc. of the 1989 IEEE Int. Conf. on Robotics and Automation (IEEE, Piscataway 1989) pp. 1547–1552
18.5.
Zurück zum Zitat S. Fatikow, U. Rembold: An automated microrobot-based desktop station for micro assembly and handling of micro-objects, IEEE Conf. on Emerging Technologies and Factory Automation (EFTAʼ96) (IEEE, Piscataway 1996) pp. 586–592 S. Fatikow, U. Rembold: An automated microrobot-based desktop station for micro assembly and handling of micro-objects, IEEE Conf. on Emerging Technologies and Factory Automation (EFTAʼ96) (IEEE, Piscataway 1996) pp. 586–592
18.6.
Zurück zum Zitat B.J. Nelson, Y. Zhou, B. Vikramaditya: Sensor-based microassembly of hybrid MEMS devices, IEEE Contr. Syst. Mag. 18, 35–45 (1998)CrossRef B.J. Nelson, Y. Zhou, B. Vikramaditya: Sensor-based microassembly of hybrid MEMS devices, IEEE Contr. Syst. Mag. 18, 35–45 (1998)CrossRef
18.7.
Zurück zum Zitat K. Suzumori, T. Miyagawa, M. Kimura, Y. Hasegawa: Micro inspection robot for 1-in pipes, IEEE/ASME Trans. Mechatron. 4, 286–292 (1999)CrossRef K. Suzumori, T. Miyagawa, M. Kimura, Y. Hasegawa: Micro inspection robot for 1-in pipes, IEEE/ASME Trans. Mechatron. 4, 286–292 (1999)CrossRef
18.8.
Zurück zum Zitat M. Takeda: Applications of MEMS to industrial inspection, Proc. 14th IEEE Int. Conf. on Micro Electro Mechanical Systems (IEEE, Piscataway 2001) pp. 182–191 M. Takeda: Applications of MEMS to industrial inspection, Proc. 14th IEEE Int. Conf. on Micro Electro Mechanical Systems (IEEE, Piscataway 2001) pp. 182–191
18.9.
Zurück zum Zitat T. Frank: Two-Axis electrodynamic micropositioning devices, J. Micromech. Microeng. 8, 114–118 (1989)CrossRef T. Frank: Two-Axis electrodynamic micropositioning devices, J. Micromech. Microeng. 8, 114–118 (1989)CrossRef
18.10.
Zurück zum Zitat N. Kawahara, N. Kawahara, T. Suto, T. Hirano, Y. Ishikawa, T. Kitahara, N. Ooyama, T. Ataka: Microfactories: New applications of micromachine technology to the manufacture of small products, Res. J. Microsyst. Technol. 3, 37–41 (1997)CrossRef N. Kawahara, N. Kawahara, T. Suto, T. Hirano, Y. Ishikawa, T. Kitahara, N. Ooyama, T. Ataka: Microfactories: New applications of micromachine technology to the manufacture of small products, Res. J. Microsyst. Technol. 3, 37–41 (1997)CrossRef
18.11.
Zurück zum Zitat Y. Sun, B.J. Nelson: Microrobotic cell injection, Proc. of the 2001 IEEE International Conf. on Robotics and Automation (ICRA2001) (IEEE, Piscataway 2001) pp. 620–625 Y. Sun, B.J. Nelson: Microrobotic cell injection, Proc. of the 2001 IEEE International Conf. on Robotics and Automation (ICRA2001) (IEEE, Piscataway 2001) pp. 620–625
18.12.
Zurück zum Zitat P. Dario, M.C. Carrozza, L. Lencioni, B. Magnani, S. Dapos Attanasio: A micro robotic system for colonoscopy, Proc. 1997 Int. Conf. on Robotics and Automation (IEEE, Piscataway 1997) pp. 1567–1572 P. Dario, M.C. Carrozza, L. Lencioni, B. Magnani, S. Dapos Attanasio: A micro robotic system for colonoscopy, Proc. 1997 Int. Conf. on Robotics and Automation (IEEE, Piscataway 1997) pp. 1567–1572
18.13.
Zurück zum Zitat F. Tendick, S.S. Sastry, R.S. Fearing, M. Cohn: Application of micromechatronics in minimally invasive surgery, IEEE/ASME Trans. Mechatron. 3, 34–42 (1998)CrossRef F. Tendick, S.S. Sastry, R.S. Fearing, M. Cohn: Application of micromechatronics in minimally invasive surgery, IEEE/ASME Trans. Mechatron. 3, 34–42 (1998)CrossRef
18.14.
Zurück zum Zitat G. Iddan, G. Meron, A. Glukhovsky, P. Swain: Wireless capsule endoscopy, Nature 405, 417 (2000)CrossRef G. Iddan, G. Meron, A. Glukhovsky, P. Swain: Wireless capsule endoscopy, Nature 405, 417 (2000)CrossRef
18.15.
Zurück zum Zitat K.B. Yesin, K. Vollmers, B.J. Nelson: Analysis and design of wireless magnetically guided microrobots in body fluids, Proc. 2004 IEEE Int. Conf. on Robotics and Automation (IEEE, Piscataway 2004) pp. 1333–1338 K.B. Yesin, K. Vollmers, B.J. Nelson: Analysis and design of wireless magnetically guided microrobots in body fluids, Proc. 2004 IEEE Int. Conf. on Robotics and Automation (IEEE, Piscataway 2004) pp. 1333–1338
18.16.
Zurück zum Zitat M.C. Roco, R.S. Williams, P. Alivisatos: Nanotechnology Research Directions: Interagency Working Group on Nanoscience, Engineering and Technology (IWGN) (Workshop Report) (Kluwer, Dordrecht 2000) M.C. Roco, R.S. Williams, P. Alivisatos: Nanotechnology Research Directions: Interagency Working Group on Nanoscience, Engineering and Technology (IWGN) (Workshop Report) (Kluwer, Dordrecht 2000)
18.17.
Zurück zum Zitat M.L. Downey, D.T. Moore, G.R. Bachula, D.M. Etter, E.F. Carey, L.A. Perine: National Nanotechnology Initiative: Leading to the Next Industrial Revolution, A Report by the Interagency Working Group on Nanoscience, Engineering and Technology (Committee on Technology, National Science and Technology Council, Washington 2000) M.L. Downey, D.T. Moore, G.R. Bachula, D.M. Etter, E.F. Carey, L.A. Perine: National Nanotechnology Initiative: Leading to the Next Industrial Revolution, A Report by the Interagency Working Group on Nanoscience, Engineering and Technology (Committee on Technology, National Science and Technology Council, Washington 2000)
18.18.
Zurück zum Zitat K. Drexler: Nanosystems: Molecular Machinery, Manufacturing and Computation (Wiley, New York 1992) K. Drexler: Nanosystems: Molecular Machinery, Manufacturing and Computation (Wiley, New York 1992)
18.19.
Zurück zum Zitat G. Binnig, H. Rohrer, C. Gerber, E. Weibel: Surface studies by scanning tunneling microscopy, Phys. Rev. Lett. 49, 57–61 (1982)CrossRef G. Binnig, H. Rohrer, C. Gerber, E. Weibel: Surface studies by scanning tunneling microscopy, Phys. Rev. Lett. 49, 57–61 (1982)CrossRef
18.20.
Zurück zum Zitat W.F. Degrado: Design of peptides and proteins, Adv. Protein Chem. 39, 51–124 (1998)CrossRef W.F. Degrado: Design of peptides and proteins, Adv. Protein Chem. 39, 51–124 (1998)CrossRef
18.21.
Zurück zum Zitat G.M. Whitesides, B. Grzybowski: Self-assembly at all scales, Science 295, 2418–2421 (2002)CrossRef G.M. Whitesides, B. Grzybowski: Self-assembly at all scales, Science 295, 2418–2421 (2002)CrossRef
18.22.
Zurück zum Zitat R. Fearing: Survey of sticking effects for micro-parts, Proc. 1995 IEEE/RSJ Int. Conf. Int. Robots and Systems (IEEE, Piscataway 1995) pp. 212–217 R. Fearing: Survey of sticking effects for micro-parts, Proc. 1995 IEEE/RSJ Int. Conf. Int. Robots and Systems (IEEE, Piscataway 1995) pp. 212–217
18.23.
Zurück zum Zitat E.L. Wolf: Nanophysics and Nanotechnology (WILEY-VCH, Weinheim 2004) E.L. Wolf: Nanophysics and Nanotechnology (WILEY-VCH, Weinheim 2004)
18.24.
Zurück zum Zitat C.-J. Kim, A.P. Pisano, R.S. Muller: Silicon-processed overhanging microgripper, IEEE/ASME J. MEMS 1, 31–36 (1992) C.-J. Kim, A.P. Pisano, R.S. Muller: Silicon-processed overhanging microgripper, IEEE/ASME J. MEMS 1, 31–36 (1992)
18.25.
Zurück zum Zitat C. Liu, T. Tsao, Y.-C. Tai, C.-M. Ho: Surface micromachined magnetic actuators, Proc. 7th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1994) pp. 57–62 C. Liu, T. Tsao, Y.-C. Tai, C.-M. Ho: Surface micromachined magnetic actuators, Proc. 7th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1994) pp. 57–62
18.26.
Zurück zum Zitat J. Judy, D.L. Polla, W.P. Robbins: A linear piezoelectric stepper motor with submicron displacement and centimeter travel, IEEE Trans. Ultrason. Ferroelectr. Freq. Contr. 37, 428–437 (1990)CrossRef J. Judy, D.L. Polla, W.P. Robbins: A linear piezoelectric stepper motor with submicron displacement and centimeter travel, IEEE Trans. Ultrason. Ferroelectr. Freq. Contr. 37, 428–437 (1990)CrossRef
18.27.
Zurück zum Zitat K. Nakamura, H. Ogura, S. Maeda, U. Sangawa, S. Aoki, T. Sato: Evaluation of the micro wobbler motor fabricated by concentric build-up process, Proc. 8th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1995) pp. 374–379 K. Nakamura, H. Ogura, S. Maeda, U. Sangawa, S. Aoki, T. Sato: Evaluation of the micro wobbler motor fabricated by concentric build-up process, Proc. 8th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1995) pp. 374–379
18.28.
Zurück zum Zitat A. Teshigahara, M. Watanabe, N. Kawahara, I. Ohtsuka, T. Hattori: Performance of a 7-mm microfabricated car, IEEE/ASME J. MEMS 4, 76–80 (1995) A. Teshigahara, M. Watanabe, N. Kawahara, I. Ohtsuka, T. Hattori: Performance of a 7-mm microfabricated car, IEEE/ASME J. MEMS 4, 76–80 (1995)
18.29.
Zurück zum Zitat K.R. Udayakumar, S.F. Bart, A.M. Flynn, J. Chen, L.S. Tavrow, L.E. Cross, R.A. Brooks, D.J. Ehrlich: Ferroelectric thin film ultrasonic micromotors, Proc. 4th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1991) pp. 109–113 K.R. Udayakumar, S.F. Bart, A.M. Flynn, J. Chen, L.S. Tavrow, L.E. Cross, R.A. Brooks, D.J. Ehrlich: Ferroelectric thin film ultrasonic micromotors, Proc. 4th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1991) pp. 109–113
18.30.
Zurück zum Zitat T. Ebefors, G. Stemme: Microrobotics. In: The MEMS Handbook, ed. by M. Gad-el-Hak (CRC, Boca Raton 2002) T. Ebefors, G. Stemme: Microrobotics. In: The MEMS Handbook, ed. by M. Gad-el-Hak (CRC, Boca Raton 2002)
18.31.
Zurück zum Zitat P. Dario, R. Valleggi, M.C. Carrozza, M.C. Montesi, M. Cocco: Review – Microactuators for microrobots: A critical survey, J. Micromech. Microeng. 2, 141–157 (1992)CrossRef P. Dario, R. Valleggi, M.C. Carrozza, M.C. Montesi, M. Cocco: Review – Microactuators for microrobots: A critical survey, J. Micromech. Microeng. 2, 141–157 (1992)CrossRef
18.32.
Zurück zum Zitat I. Shimoyama: Scaling in microrobots, Proc. IEEE/RSJ Intelligent Robots and Systems (IEEE, Piscataway 1995) pp. 208–211 I. Shimoyama: Scaling in microrobots, Proc. IEEE/RSJ Intelligent Robots and Systems (IEEE, Piscataway 1995) pp. 208–211
18.33.
Zurück zum Zitat R.S. Fearing: Powering 3-dimensional microrobots: power density limitations, tutorial on “Micro Mechatronics and Micro Robotics”, Proc. 1998 IEEE Int. Conf. on Robotics and Automation (IEEE, Piscataway 1998) R.S. Fearing: Powering 3-dimensional microrobots: power density limitations, tutorial on “Micro Mechatronics and Micro Robotics”, Proc. 1998 IEEE Int. Conf. on Robotics and Automation (IEEE, Piscataway 1998)
18.34.
Zurück zum Zitat R.G. Gilbertson, J.D. Busch: A survey of micro-actuator technologies for future spacecraft missions, J. Br. Interplanet. Soc. 49, 129–138 (1996) R.G. Gilbertson, J.D. Busch: A survey of micro-actuator technologies for future spacecraft missions, J. Br. Interplanet. Soc. 49, 129–138 (1996)
18.35.
Zurück zum Zitat M. Mehregany, P. Nagarkar, S.D. Senturia, J.H. Lang: Operation of microfabricated harmonic and ordinary side-drive motors, Proc. 3rd IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1990) pp. 1–8 M. Mehregany, P. Nagarkar, S.D. Senturia, J.H. Lang: Operation of microfabricated harmonic and ordinary side-drive motors, Proc. 3rd IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1990) pp. 1–8
18.36.
Zurück zum Zitat Y.C. Tai, L.S. Fan, R.S. Mulle: IC-processed micro-motors: design, technology, and testing, Proc. 2nd IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1989) pp. 1–6 Y.C. Tai, L.S. Fan, R.S. Mulle: IC-processed micro-motors: design, technology, and testing, Proc. 2nd IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1989) pp. 1–6
18.37.
Zurück zum Zitat T. Ohnstein, T. Fukiura, J. Ridley, U. Bonne: Micromachined silicon microvalve, Proc. 3rd IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1990) pp. 95–99 T. Ohnstein, T. Fukiura, J. Ridley, U. Bonne: Micromachined silicon microvalve, Proc. 3rd IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1990) pp. 95–99
18.38.
Zurück zum Zitat L.Y. Chen, S.L. Zhang, J.J. Yao, D.C. Thomas, N.C. MacDonald: Selective chemical vapor deposition of tungsten for microdynamic structures, Proc. 2nd IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1989) pp. 82–87 L.Y. Chen, S.L. Zhang, J.J. Yao, D.C. Thomas, N.C. MacDonald: Selective chemical vapor deposition of tungsten for microdynamic structures, Proc. 2nd IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1989) pp. 82–87
18.39.
Zurück zum Zitat K. Yanagisawa, H. Kuwano, A. Tago: An electromagnetically driven microvalve, Proc. 7th Int. Conf. on Solid-State Sensors and Actuators (IEEE, Piscataway 1993) pp. 102–105 K. Yanagisawa, H. Kuwano, A. Tago: An electromagnetically driven microvalve, Proc. 7th Int. Conf. on Solid-State Sensors and Actuators (IEEE, Piscataway 1993) pp. 102–105
18.40.
Zurück zum Zitat M. Esashi, S. Shoji, A. Nakano: Normally close microvalve and micropump fabricated on a silicon wafer, Proc. 2nd IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1989) pp. 29–34 M. Esashi, S. Shoji, A. Nakano: Normally close microvalve and micropump fabricated on a silicon wafer, Proc. 2nd IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1989) pp. 29–34
18.41.
Zurück zum Zitat R. Petrucci, K. Simmons: An introduction to piezoelectric crystals. In: Sensors Magazine (Helmers, Peterborough 1994) pp. 26– R. Petrucci, K. Simmons: An introduction to piezoelectric crystals. In: Sensors Magazine (Helmers, Peterborough 1994) pp. 26–
18.42.
Zurück zum Zitat J. Goldstein, D. Newbury, D. Joy, C. Lyman, P. Echlin, E. Lifshin, L. Sawyer, J. Michael: Scanning Electron Microscopy and X-ray Microanalysis (Kluwer Academic/Plenum, New York 2003) J. Goldstein, D. Newbury, D. Joy, C. Lyman, P. Echlin, E. Lifshin, L. Sawyer, J. Michael: Scanning Electron Microscopy and X-ray Microanalysis (Kluwer Academic/Plenum, New York 2003)
18.43.
Zurück zum Zitat G. Binnig, H. Rohrer: In touch with atoms, Rev. Mod. Phys. 71, S324–S330 (1999)CrossRef G. Binnig, H. Rohrer: In touch with atoms, Rev. Mod. Phys. 71, S324–S330 (1999)CrossRef
18.44.
Zurück zum Zitat G. Binnig, C.F. Quate, C. Gerber: Atomic force microscope, Phys. Rev. Lett. 56, 93–96 (1986)CrossRef G. Binnig, C.F. Quate, C. Gerber: Atomic force microscope, Phys. Rev. Lett. 56, 93–96 (1986)CrossRef
18.45.
Zurück zum Zitat M.J. Doktycz, C.J. Sullivan, P.R. Hoyt, D.A. Pelletier, S. Wu, D.P. Allison: AFM imaging of bacteria in liquid media immobilized on gelatin coated mica surfaces, Ultramicroscopy 97, 209–216 (2003)CrossRef M.J. Doktycz, C.J. Sullivan, P.R. Hoyt, D.A. Pelletier, S. Wu, D.P. Allison: AFM imaging of bacteria in liquid media immobilized on gelatin coated mica surfaces, Ultramicroscopy 97, 209–216 (2003)CrossRef
18.46.
Zurück zum Zitat S.A. Campbell: The Science and Engineering of Microelectronic Fabrication (Oxford Univ. Press, New York 2001) S.A. Campbell: The Science and Engineering of Microelectronic Fabrication (Oxford Univ. Press, New York 2001)
18.47.
Zurück zum Zitat C.J. Jaeger: Introduction to Microelectronic Fabrication (Prentice Hall, Upper Saddle River 2002) C.J. Jaeger: Introduction to Microelectronic Fabrication (Prentice Hall, Upper Saddle River 2002)
18.48.
Zurück zum Zitat J.D. Plummer, M.D. Deal, P.B. Griffin: Silicon VLSI Technology (Prentice Hall, Upper Saddle River 2000) J.D. Plummer, M.D. Deal, P.B. Griffin: Silicon VLSI Technology (Prentice Hall, Upper Saddle River 2000)
18.49.
Zurück zum Zitat M. Gad-el-Hak(Ed.): The MEMS Handbook (CRC, Boca Raton 2002)MATH M. Gad-el-Hak(Ed.): The MEMS Handbook (CRC, Boca Raton 2002)MATH
18.50.
Zurück zum Zitat T.-R. Hsu: MEMS and Microsystems Design and Manufacture (McGraw-Hill, New York 2002) T.-R. Hsu: MEMS and Microsystems Design and Manufacture (McGraw-Hill, New York 2002)
18.51.
Zurück zum Zitat G.T.A. Kovacs: Micromachined Transducers Sourcebook (McGraw-Hill, New York 1998) G.T.A. Kovacs: Micromachined Transducers Sourcebook (McGraw-Hill, New York 1998)
18.52.
Zurück zum Zitat G.T.A. Kovacs, N.I. Maluf, K.A. Petersen: Bulk micromachining of silicon, Proc. IEEE Int. Conf. Robot. Autom. 86, 1536–1551 (1998) G.T.A. Kovacs, N.I. Maluf, K.A. Petersen: Bulk micromachining of silicon, Proc. IEEE Int. Conf. Robot. Autom. 86, 1536–1551 (1998)
18.53.
Zurück zum Zitat P. Rai-Choudhury (Ed.): Handbook of Microlithography, Micromachining and Microfabrication (SPIE, Bellingham 1997) P. Rai-Choudhury (Ed.): Handbook of Microlithography, Micromachining and Microfabrication (SPIE, Bellingham 1997)
18.54.
Zurück zum Zitat S.Y. Chou: Nano-imprint lithography and lithographically induced self-assembly, MRS Bull. 26, 512–517 (2001)CrossRef S.Y. Chou: Nano-imprint lithography and lithographically induced self-assembly, MRS Bull. 26, 512–517 (2001)CrossRef
18.55.
Zurück zum Zitat M.A. Herman: Molecular Beam Epitaxy: Fundamentals and Current Status (Springer, New York 1996) M.A. Herman: Molecular Beam Epitaxy: Fundamentals and Current Status (Springer, New York 1996)
18.56.
Zurück zum Zitat J.S. Frood, G.J. Davis, W.T. Tsang: Chemical Beam Epitaxy and Related Techniques (Wiley, New York 1997) J.S. Frood, G.J. Davis, W.T. Tsang: Chemical Beam Epitaxy and Related Techniques (Wiley, New York 1997)
18.57.
Zurück zum Zitat S. Mahajan, K.S.S. Harsha: Principles of Growth and Processing of Semiconductors (McGraw-Hill, New York 1999) S. Mahajan, K.S.S. Harsha: Principles of Growth and Processing of Semiconductors (McGraw-Hill, New York 1999)
18.58.
Zurück zum Zitat C.A. Mirkin: Dip-pen nanolithography: automated fabrication of custom multicomponent, sub-100 nanometer surface architectures, MRS Bull. 26, 535–538 (2001)CrossRef C.A. Mirkin: Dip-pen nanolithography: automated fabrication of custom multicomponent, sub-100 nanometer surface architectures, MRS Bull. 26, 535–538 (2001)CrossRef
18.59.
Zurück zum Zitat C.A. Harper: Electronic Packaging and Interconnection Handbook (McGraw-Hill, New York 2000) C.A. Harper: Electronic Packaging and Interconnection Handbook (McGraw-Hill, New York 2000)
18.60.
Zurück zum Zitat K.F. Bohringer, R.S. Fearing, K.Y. Goldberg: Microassembly. In: Handbook of Industrial Robotics, ed. by S. Nof (Wiley, New York 1999) pp. 1045–1066CrossRef K.F. Bohringer, R.S. Fearing, K.Y. Goldberg: Microassembly. In: Handbook of Industrial Robotics, ed. by S. Nof (Wiley, New York 1999) pp. 1045–1066CrossRef
18.61.
Zurück zum Zitat G. Yang, J.A. Gaines, B.J. Nelson: A supervisory wafer-level 3D microassembly system for hybrid MEMS fabrication, J. Intell. Robot. Syst. 37, 43–68 (2003)CrossRef G. Yang, J.A. Gaines, B.J. Nelson: A supervisory wafer-level 3D microassembly system for hybrid MEMS fabrication, J. Intell. Robot. Syst. 37, 43–68 (2003)CrossRef
18.62.
Zurück zum Zitat P. Dario, M. Carrozza, N. Croce, M. Montesi, M. Cocco: Non-traditional technologies for microfabrication, J. Micromech. Microeng. 5, 64–71 (1995)CrossRef P. Dario, M. Carrozza, N. Croce, M. Montesi, M. Cocco: Non-traditional technologies for microfabrication, J. Micromech. Microeng. 5, 64–71 (1995)CrossRef
18.63.
Zurück zum Zitat W. Benecke: Silicon microactuators: activation mechanisms and scaling problems, Proc. IEEE Int. Conf. Solid-State Sensors and Actuators (IEEE, Piscataway 1991) pp. 46–50 W. Benecke: Silicon microactuators: activation mechanisms and scaling problems, Proc. IEEE Int. Conf. Solid-State Sensors and Actuators (IEEE, Piscataway 1991) pp. 46–50
18.64.
Zurück zum Zitat A. Menciassi, A. Eisinberg, M. Mazzoni, P. Dario: A sensorized electro discharge machined superelastic alloy microgripper for micromanipulation: simulation and characterization, Proc. 2002 IEEE/RSJ Int. Conf. Intelligent Robots and Systems (IEEE, Piscataway 2002) pp. 1591–1595 A. Menciassi, A. Eisinberg, M. Mazzoni, P. Dario: A sensorized electro discharge machined superelastic alloy microgripper for micromanipulation: simulation and characterization, Proc. 2002 IEEE/RSJ Int. Conf. Intelligent Robots and Systems (IEEE, Piscataway 2002) pp. 1591–1595
18.65.
Zurück zum Zitat T.R. Hsu: Packaging design of microsystems and meso-scale devices, IEEE Trans. Adv. Packag. 23, 596–601 (2000)CrossRef T.R. Hsu: Packaging design of microsystems and meso-scale devices, IEEE Trans. Adv. Packag. 23, 596–601 (2000)CrossRef
18.66.
Zurück zum Zitat L. Lin: MEMS post-packaging by localized heating and bonding, IEEE Trans. Adv. Packag. 23, 608–616 (2000)CrossRef L. Lin: MEMS post-packaging by localized heating and bonding, IEEE Trans. Adv. Packag. 23, 608–616 (2000)CrossRef
18.67.
Zurück zum Zitat A. Tixier, Y. Mita, S. Oshima, J.P. Gouy, H. Fujita: 3-D microsystem packaging for interconnecting electrical, optical and mechanical microdevices to the external world, Proc. 13th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 2000) pp. 698–703 A. Tixier, Y. Mita, S. Oshima, J.P. Gouy, H. Fujita: 3-D microsystem packaging for interconnecting electrical, optical and mechanical microdevices to the external world, Proc. 13th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 2000) pp. 698–703
18.68.
Zurück zum Zitat M.J. Madou: Fundamentals of Microfabrication (CRC, Boca Raton 2002) M.J. Madou: Fundamentals of Microfabrication (CRC, Boca Raton 2002)
18.69.
Zurück zum Zitat I. Shimoyama, O. Kano, H. Miura: 3D micro-structures folded by Lorentz force, Proc. 11th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1998) pp. 24–28 I. Shimoyama, O. Kano, H. Miura: 3D micro-structures folded by Lorentz force, Proc. 11th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1998) pp. 24–28
18.70.
Zurück zum Zitat K.F. Bohringer, B.R. Donald, L. Kavraki, F.L. Lamiraux: Part orientation with one or two stable equilibria using programmable vector fields, IEEE Trans. Robot. Autom. 16, 157–170 (2000)CrossRef K.F. Bohringer, B.R. Donald, L. Kavraki, F.L. Lamiraux: Part orientation with one or two stable equilibria using programmable vector fields, IEEE Trans. Robot. Autom. 16, 157–170 (2000)CrossRef
18.71.
Zurück zum Zitat V. Kaajakari, A. Lal: An electrostatic batch assembly of surface MEMS using ultrasonic triboelectricity, Proc. 14th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 2001) pp. 10–13 V. Kaajakari, A. Lal: An electrostatic batch assembly of surface MEMS using ultrasonic triboelectricity, Proc. 14th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 2001) pp. 10–13
18.72.
Zurück zum Zitat G. Yang, B.J. Nelson: Micromanipulation contact transition control by selective focusing and microforce control, Proc. 2003 IEEE Int. Conf. on Robotics and Automation (IEEE, Piscataway 2003) pp. 3200–3206 G. Yang, B.J. Nelson: Micromanipulation contact transition control by selective focusing and microforce control, Proc. 2003 IEEE Int. Conf. on Robotics and Automation (IEEE, Piscataway 2003) pp. 3200–3206
18.73.
Zurück zum Zitat G. Morel, E. Malis, S. Boudet: Impedance based combination of visual and force control, Proc. 1998 IEEE Int. Conf. on Robotics and Automation (IEEE, Piscataway 1998) pp. 1743–1748 G. Morel, E. Malis, S. Boudet: Impedance based combination of visual and force control, Proc. 1998 IEEE Int. Conf. on Robotics and Automation (IEEE, Piscataway 1998) pp. 1743–1748
18.74.
Zurück zum Zitat F. Arai, D. Andou, T. Fukuda: Adhesion forces reduction for micro manipulation based on micro physics, Proc. 9th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1996) pp. 354–359 F. Arai, D. Andou, T. Fukuda: Adhesion forces reduction for micro manipulation based on micro physics, Proc. 9th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1996) pp. 354–359
18.75.
Zurück zum Zitat Y. Zhou, B.J. Nelson: The effect of material properties and gripping force on micrograsping, Proc. 2000 IEEE Int. Conf. Robotics and Automation (IEEE, Piscataway 2000) pp. 1115–1120 Y. Zhou, B.J. Nelson: The effect of material properties and gripping force on micrograsping, Proc. 2000 IEEE Int. Conf. Robotics and Automation (IEEE, Piscataway 2000) pp. 1115–1120
18.76.
Zurück zum Zitat K. Kurata: Mass production techniques for optical modules, Proc. 48th IEEE Electronic Components and Technology Conf. (IEEE, Piscataway 1998) pp. 572–580 K. Kurata: Mass production techniques for optical modules, Proc. 48th IEEE Electronic Components and Technology Conf. (IEEE, Piscataway 1998) pp. 572–580
18.77.
Zurück zum Zitat V.T. Portman, B.-Z. Sandler, E. Zahavi: Rigid 6 × 6 parallel platform for precision 3-D micromanipulation: theory and design application, IEEE Trans. Robot. Autom. 16, 629–643 (2000)CrossRef V.T. Portman, B.-Z. Sandler, E. Zahavi: Rigid 6 × 6 parallel platform for precision 3-D micromanipulation: theory and design application, IEEE Trans. Robot. Autom. 16, 629–643 (2000)CrossRef
18.78.
Zurück zum Zitat R.M. Haralick, L.G. Shapiro: Computer and Robot Vision (Addison-Wesley, Reading 1993) R.M. Haralick, L.G. Shapiro: Computer and Robot Vision (Addison-Wesley, Reading 1993)
18.79.
Zurück zum Zitat A. Khotanzad, H. Banerjee, M.D. Srinath: A vision system for inspection of ball bonds and 2-D profile of bonding wires in integrated circuits, IEEE Trans. Semicond. Manuf. 7, 413–422 (1994)CrossRef A. Khotanzad, H. Banerjee, M.D. Srinath: A vision system for inspection of ball bonds and 2-D profile of bonding wires in integrated circuits, IEEE Trans. Semicond. Manuf. 7, 413–422 (1994)CrossRef
18.80.
Zurück zum Zitat J.T. Feddema, R.W. Simon: CAD-driven microassembly and visual servoing, Proc. 1998 IEEE Int. Conf. Robotics and Automation (IEEE, Piscataway 1998) pp. 1212 -1219 J.T. Feddema, R.W. Simon: CAD-driven microassembly and visual servoing, Proc. 1998 IEEE Int. Conf. Robotics and Automation (IEEE, Piscataway 1998) pp. 1212 -1219
18.81.
Zurück zum Zitat E. Trucco, A. Verri: Introductory Techniques for 3-D Computer Vision (Prentice Hall, Upper Saddle River 1998) E. Trucco, A. Verri: Introductory Techniques for 3-D Computer Vision (Prentice Hall, Upper Saddle River 1998)
18.82.
Zurück zum Zitat S. Hutchinson, G.D. Hager, P.I. Corke: A tutorial on visual servo control, IEEE Trans. Robot. Autom. 12, 651–670 (1996)CrossRef S. Hutchinson, G.D. Hager, P.I. Corke: A tutorial on visual servo control, IEEE Trans. Robot. Autom. 12, 651–670 (1996)CrossRef
18.83.
Zurück zum Zitat B. Siciliano, L. Villani: Robot Force Control (Kluwer, Dordrecht 2000) B. Siciliano, L. Villani: Robot Force Control (Kluwer, Dordrecht 2000)
18.84.
Zurück zum Zitat T. Yoshikawa: Force control of robot manipulators, Proc. 2000 IEEE Int. Conf. Robotics and Automation (IEEE, Piscataway 2000) pp. 220–226 T. Yoshikawa: Force control of robot manipulators, Proc. 2000 IEEE Int. Conf. Robotics and Automation (IEEE, Piscataway 2000) pp. 220–226
18.85.
Zurück zum Zitat J.A. Thompson, R.S. Fearing: Automating microassembly with ortho-tweezers and force sensing, Proc. 2001 IEEE/RSJ Int. Conf. Int. Robots and Systems (IEEE, Piscataway 2001) pp. 1327–1334 J.A. Thompson, R.S. Fearing: Automating microassembly with ortho-tweezers and force sensing, Proc. 2001 IEEE/RSJ Int. Conf. Int. Robots and Systems (IEEE, Piscataway 2001) pp. 1327–1334
18.86.
Zurück zum Zitat B.J. Nelson, P.K. Khosla: Force and vision resolvability for assimilating disparate sensory feedback, IEEE Trans. Robot. Autom. 12, 714–731 (1996)CrossRef B.J. Nelson, P.K. Khosla: Force and vision resolvability for assimilating disparate sensory feedback, IEEE Trans. Robot. Autom. 12, 714–731 (1996)CrossRef
18.87.
Zurück zum Zitat Y. Haddab, N. Chaillet, A. Bourjault: A microgripper using smart piezoelectric actuators, Proc. 2000 IEEE/RSJ Int. Conf. Intelligent Robots and Systems (IEEE, Piscataway 2000) pp. 659–664 Y. Haddab, N. Chaillet, A. Bourjault: A microgripper using smart piezoelectric actuators, Proc. 2000 IEEE/RSJ Int. Conf. Intelligent Robots and Systems (IEEE, Piscataway 2000) pp. 659–664
18.88.
Zurück zum Zitat D. Popa, B.H. Kang, J. Sin, J. Zou: Reconfigurable micro-assembly system for photonics applications, Proc. 2002 IEEE Int. Conf. Robotics and Automation (IEEE, Piscataway 2002) pp. 1495–1500 D. Popa, B.H. Kang, J. Sin, J. Zou: Reconfigurable micro-assembly system for photonics applications, Proc. 2002 IEEE Int. Conf. Robotics and Automation (IEEE, Piscataway 2002) pp. 1495–1500
18.89.
Zurück zum Zitat A.P. Lee, D.R. Ciarlo, P.A. Krulevitch, S. Lehew, J. Trevin, M.A. Northrup: A practical microgripper by fine alignment, eutectic bonding and SMA actuation, Transducersʼ95 (IEEE, Piscataway 1995) pp. 368–371 A.P. Lee, D.R. Ciarlo, P.A. Krulevitch, S. Lehew, J. Trevin, M.A. Northrup: A practical microgripper by fine alignment, eutectic bonding and SMA actuation, Transducersʼ95 (IEEE, Piscataway 1995) pp. 368–371
18.90.
Zurück zum Zitat H. Seki: Modeling and impedance control of a piezoelectric bimorph microgripper, Proc. 1992 IEEE/RSJ Int. Conf. Intelligent Robots and Systems (IEEE, Piscataway 1992) pp. 958–965 H. Seki: Modeling and impedance control of a piezoelectric bimorph microgripper, Proc. 1992 IEEE/RSJ Int. Conf. Intelligent Robots and Systems (IEEE, Piscataway 1992) pp. 958–965
18.91.
Zurück zum Zitat W. Nogimori, K. Irisa, M. Ando, Y. Naruse: A laser-powered micro-gripper, Proc. 10th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1997) pp. 267–271 W. Nogimori, K. Irisa, M. Ando, Y. Naruse: A laser-powered micro-gripper, Proc. 10th IEEE Int. Conf. Micro Electro Mechanical Systems (IEEE, Piscataway 1997) pp. 267–271
18.92.
Zurück zum Zitat S. Fatikow, U. Rembold: Microsystem Technology and Microrobotics (Springer, Berlin, Heidelberg 1997)MATH S. Fatikow, U. Rembold: Microsystem Technology and Microrobotics (Springer, Berlin, Heidelberg 1997)MATH
18.93.
Zurück zum Zitat T. Hayashi: Micro mechanism, J. Robot. Mechatr. 3, 2–7 (1991) T. Hayashi: Micro mechanism, J. Robot. Mechatr. 3, 2–7 (1991)
18.94.
Zurück zum Zitat S. Johansson: Micromanipulation for micro- and nanomanufacturing, INRIA/IEEE Symp. on Emerging Technologies and Factory Automation (ETFAʼ95), Paris (1995) pp. 3–8 S. Johansson: Micromanipulation for micro- and nanomanufacturing, INRIA/IEEE Symp. on Emerging Technologies and Factory Automation (ETFAʼ95), Paris (1995) pp. 3–8
18.95.
Zurück zum Zitat K.-T. Park, M. Esashi: A multilink active catheter with polyimide-based integrated CMOS interface circuits, J. MEMS 8, 349–357 (1999) K.-T. Park, M. Esashi: A multilink active catheter with polyimide-based integrated CMOS interface circuits, J. MEMS 8, 349–357 (1999)
18.96.
Zurück zum Zitat Y. Haga, Y. Tanahashi, M. Esashi: Small diameter active catheter using shape memory alloy, Proc. IEEE 11th Int. Workshop on Micro Electro Mechanical Systems, Heidelberg (1998) pp. 419–424 Y. Haga, Y. Tanahashi, M. Esashi: Small diameter active catheter using shape memory alloy, Proc. IEEE 11th Int. Workshop on Micro Electro Mechanical Systems, Heidelberg (1998) pp. 419–424
18.97.
Zurück zum Zitat E.W.H. Jager, O. Inganas, I. Lundstrom: Microrobots for micrometer-size objects in aqueous media: Potential tools for single cell manipulation, Science 288, 2335–2338 (2000)CrossRef E.W.H. Jager, O. Inganas, I. Lundstrom: Microrobots for micrometer-size objects in aqueous media: Potential tools for single cell manipulation, Science 288, 2335–2338 (2000)CrossRef
18.98.
Zurück zum Zitat E.W.H. Jager, E. Smela, O. Inganas: Microfabricating conjugated polymer actuators, Science 290, 1540–1545 (2000)CrossRef E.W.H. Jager, E. Smela, O. Inganas: Microfabricating conjugated polymer actuators, Science 290, 1540–1545 (2000)CrossRef
18.99.
Zurück zum Zitat J.W. Suh, S.F. Glander, R.B. Darling, C.W. Storment, G.T.A. Kovacs: Organic thermal and electrostatic ciliary microactuator array for object manipulation, Sens. Actuat. A 58, 51–60 (1997)CrossRef J.W. Suh, S.F. Glander, R.B. Darling, C.W. Storment, G.T.A. Kovacs: Organic thermal and electrostatic ciliary microactuator array for object manipulation, Sens. Actuat. A 58, 51–60 (1997)CrossRef
18.100.
Zurück zum Zitat E. Smela, M. Kallenbach, J. Holdenried: Electrochemically driven polypyrrole bilayers for moving and positioning bulk micromachined silicon plates, J. MEMS 8, 373–383 (1999) E. Smela, M. Kallenbach, J. Holdenried: Electrochemically driven polypyrrole bilayers for moving and positioning bulk micromachined silicon plates, J. MEMS 8, 373–383 (1999)
18.101.
Zurück zum Zitat S. Konishi, H. Fujita: A conveyance system using air flow based on the concept of distributed micro motion systems, IEEE J. MEMS 3, 54–58 (1994) S. Konishi, H. Fujita: A conveyance system using air flow based on the concept of distributed micro motion systems, IEEE J. MEMS 3, 54–58 (1994)
18.102.
Zurück zum Zitat M. Ataka, A. Omodaka, N. Takeshima, H. Fujita: Fabrication and operation of polyimide bimorph actuators for a ciliary motion system, J. MEMS 2, 146–150 (1993) M. Ataka, A. Omodaka, N. Takeshima, H. Fujita: Fabrication and operation of polyimide bimorph actuators for a ciliary motion system, J. MEMS 2, 146–150 (1993)
18.103.
Zurück zum Zitat G.-X. Zhou: Swallowable or implantable body temperature telemeter-body temperature radio pill, Proc. IEEE 15th Annual Northeast Bioengineering Conf. (1989) pp. 165–166 G.-X. Zhou: Swallowable or implantable body temperature telemeter-body temperature radio pill, Proc. IEEE 15th Annual Northeast Bioengineering Conf. (1989) pp. 165–166
18.104.
Zurück zum Zitat A. Uchiyama: Endoradiosonde Needs Micro Machine Technology, Proc. IEEE 6th Int. Symp. on Micro Machine and Human Science (MHS ʼ95) (IEEE, Nagoya 1995) pp. 31–37 A. Uchiyama: Endoradiosonde Needs Micro Machine Technology, Proc. IEEE 6th Int. Symp. on Micro Machine and Human Science (MHS ʼ95) (IEEE, Nagoya 1995) pp. 31–37
18.105.
18.106.
Zurück zum Zitat R. Yeh, E.J.J. Kruglick, K.S.J. Pister: Surface-micromachined components for articulated microrobots, J. MEMS 5, 10–17 (1996) R. Yeh, E.J.J. Kruglick, K.S.J. Pister: Surface-micromachined components for articulated microrobots, J. MEMS 5, 10–17 (1996)
18.107.
Zurück zum Zitat P.E. Kladitis, V.M. Bright, K.F. Harsh, Y.C. Lee: Prototype Microrobots for micro positioning in a manufacturing process and micro unmanned vehicles, Proc. IEEE 12th Int. Conf. on Micro Electro Mechanical Systems (MEMSʼ99), Oralndo (1999) pp. 570–575 P.E. Kladitis, V.M. Bright, K.F. Harsh, Y.C. Lee: Prototype Microrobots for micro positioning in a manufacturing process and micro unmanned vehicles, Proc. IEEE 12th Int. Conf. on Micro Electro Mechanical Systems (MEMSʼ99), Oralndo (1999) pp. 570–575
18.108.
Zurück zum Zitat D. Ruffieux, N.F. d. Rooij: A 3-DoF bimorph actuator array capable of locomotion, 13th European Conf. on Solid-State Transducers (Eurosensors XIII), Hague (1999) pp. 725–728 D. Ruffieux, N.F. d. Rooij: A 3-DoF bimorph actuator array capable of locomotion, 13th European Conf. on Solid-State Transducers (Eurosensors XIII), Hague (1999) pp. 725–728
18.109.
Zurück zum Zitat J.-M. Breguet, P. Renaud: A 4 degrees-of-freedoms microrobot with nanometer resolution, Robotics 14, 199–203 (1996) J.-M. Breguet, P. Renaud: A 4 degrees-of-freedoms microrobot with nanometer resolution, Robotics 14, 199–203 (1996)
18.110.
Zurück zum Zitat A. Flynn, L.S. Tavrow, S.F. Bart, R.A. Brooks, D.J. Ehrlich, K.R. Udayakumar, L.E. Cross: Piezoelectric micromotors for microrobots, IEEE J. MEMS 1, 44–51 (1992) A. Flynn, L.S. Tavrow, S.F. Bart, R.A. Brooks, D.J. Ehrlich, K.R. Udayakumar, L.E. Cross: Piezoelectric micromotors for microrobots, IEEE J. MEMS 1, 44–51 (1992)
18.111.
Zurück zum Zitat A. Teshigahara, M. Watanabe, N. Kawahara, Y. Ohtsuka, T. Hattori: Performance of a 7 mm microfabricated car, IEEE/ASME J. MEMS 4, 76–80 (1995) A. Teshigahara, M. Watanabe, N. Kawahara, Y. Ohtsuka, T. Hattori: Performance of a 7 mm microfabricated car, IEEE/ASME J. MEMS 4, 76–80 (1995)
18.112.
Zurück zum Zitat T. Ebefors, J. Mattson, E. Kalvesten, G. Stemme: A walking silicon micro-robot, 10th Int. Conf. on Solid-State Sensors and Actuators (Transducersʼ99), Sendai (1999) pp. 1202–1205 T. Ebefors, J. Mattson, E. Kalvesten, G. Stemme: A walking silicon micro-robot, 10th Int. Conf. on Solid-State Sensors and Actuators (Transducersʼ99), Sendai (1999) pp. 1202–1205
18.113.
Zurück zum Zitat N. Miki, I. Shimoyama: Flight performance of micro-wings rotating in an alternating magnetic field, Proc. IEEE 12th Int. Conf. on Micro Electro Mechanical Systems (MEMSʼ99), Oralndo (1999) pp. 153–158 N. Miki, I. Shimoyama: Flight performance of micro-wings rotating in an alternating magnetic field, Proc. IEEE 12th Int. Conf. on Micro Electro Mechanical Systems (MEMSʼ99), Oralndo (1999) pp. 153–158
18.115.
Zurück zum Zitat K.I. Arai, W. Sugawara, T. Honda: Magnetic small flying machines, Tech. Digest Transducersʼ95 and Eurosensors IX, Stockholm (1995) pp. 316–319 K.I. Arai, W. Sugawara, T. Honda: Magnetic small flying machines, Tech. Digest Transducersʼ95 and Eurosensors IX, Stockholm (1995) pp. 316–319
18.116.
Zurück zum Zitat T. Fukuda, A. Kawamoto, F. Arai, H. Matsuura: Mechanism and swimming experiment of micro mobile robot in water, Proc. IEEE 7th Int. Workshop on Micro Electro Mechanical Systems (MEMSʼ94), Oiso (1994) pp. 273–278 T. Fukuda, A. Kawamoto, F. Arai, H. Matsuura: Mechanism and swimming experiment of micro mobile robot in water, Proc. IEEE 7th Int. Workshop on Micro Electro Mechanical Systems (MEMSʼ94), Oiso (1994) pp. 273–278
18.117.
Zurück zum Zitat I. Shimoyama: Hybrid system of mechanical parts and living organisms for microrobots, Proc. IEEE 6th Int. Symp. on Micro Machine and Human Science (MHS ʼ95) (IEEE, Nagoya 1995) p. 55 I. Shimoyama: Hybrid system of mechanical parts and living organisms for microrobots, Proc. IEEE 6th Int. Symp. on Micro Machine and Human Science (MHS ʼ95) (IEEE, Nagoya 1995) p. 55
18.118.
Zurück zum Zitat A. Ashkin: Acceleration and trapping of particles by radiation pressure, Phys. Rev. Lett. 24, 156–159 (1970)CrossRef A. Ashkin: Acceleration and trapping of particles by radiation pressure, Phys. Rev. Lett. 24, 156–159 (1970)CrossRef
18.119.
Zurück zum Zitat T.N. Bruican, M.J. Smyth, H.A. Crissman, G.C. Salzman, C.C. Stewart, J.C. Martin: Automated single-cell manipulation and sorting by light trapping, Appl. Opt. 26, 5311–5316 (1987)CrossRef T.N. Bruican, M.J. Smyth, H.A. Crissman, G.C. Salzman, C.C. Stewart, J.C. Martin: Automated single-cell manipulation and sorting by light trapping, Appl. Opt. 26, 5311–5316 (1987)CrossRef
18.120.
Zurück zum Zitat J. Conia, B.S. Edwards, S. Voelkel: The micro-robotic laboratory: Optical trapping and scissing for the biologist, J. Clin. Lab. Anal. 11, 28–38 (1997)CrossRef J. Conia, B.S. Edwards, S. Voelkel: The micro-robotic laboratory: Optical trapping and scissing for the biologist, J. Clin. Lab. Anal. 11, 28–38 (1997)CrossRef
18.121.
Zurück zum Zitat W.H. Wright, G.J. Sonek, Y. Tadir, M.W. Berns: Laser trapping in cell biology, IEEE J. Quant. Electron. 26, 2148–2157 (1990)CrossRef W.H. Wright, G.J. Sonek, Y. Tadir, M.W. Berns: Laser trapping in cell biology, IEEE J. Quant. Electron. 26, 2148–2157 (1990)CrossRef
18.122.
Zurück zum Zitat F. Arai, K. Morishima, T. Kasugai, T. Fukuda: Bio-micromanipulation (new direction for operation improvement), Proc. of 1997 IEEE/RSJ Int. Conf. on Intelligent Robotics and Systems (IEEE, Piscataway 1997) pp. 1300–1305 F. Arai, K. Morishima, T. Kasugai, T. Fukuda: Bio-micromanipulation (new direction for operation improvement), Proc. of 1997 IEEE/RSJ Int. Conf. on Intelligent Robotics and Systems (IEEE, Piscataway 1997) pp. 1300–1305
18.123.
Zurück zum Zitat M. Nishioka, S. Katsura, K. Hirano, A. Mizuno: Evaluation of cell characteristics by step-wise orientational rotation using optoelectrostatic micromanipulation, IEEE Trans. Ind. Appl. 33, 1381–1388 (1997)CrossRef M. Nishioka, S. Katsura, K. Hirano, A. Mizuno: Evaluation of cell characteristics by step-wise orientational rotation using optoelectrostatic micromanipulation, IEEE Trans. Ind. Appl. 33, 1381–1388 (1997)CrossRef
18.124.
Zurück zum Zitat M. Washizu, Y. Kurahashi, H. Iochi, O. Kurosawa, S. Aizawa, S. Kudo, Y. Magariyama, H. Hotani: Dielectrophoretic measurement of bacterial motor characteristics, IEEE Trans. Ind. Appl. 29, 286–294 (1993)CrossRef M. Washizu, Y. Kurahashi, H. Iochi, O. Kurosawa, S. Aizawa, S. Kudo, Y. Magariyama, H. Hotani: Dielectrophoretic measurement of bacterial motor characteristics, IEEE Trans. Ind. Appl. 29, 286–294 (1993)CrossRef
18.125.
Zurück zum Zitat Y. Kimura, R. Yanagimachi: Intracytoplasmic sperm injection in the mouse, Biol. Reprod. 52, 709–720 (1995)CrossRef Y. Kimura, R. Yanagimachi: Intracytoplasmic sperm injection in the mouse, Biol. Reprod. 52, 709–720 (1995)CrossRef
18.126.
Zurück zum Zitat M. Mischel, A. Voss, H.A. Pohl: Cellular spin resonance in rotating electric fields, J. Biol. Phys. 10, 223–226 (1982)CrossRef M. Mischel, A. Voss, H.A. Pohl: Cellular spin resonance in rotating electric fields, J. Biol. Phys. 10, 223–226 (1982)CrossRef
18.127.
Zurück zum Zitat W.M. Arnold, U. Zimmermann: Electro-Rotation: Development of a technique for dielectric measurements on individual cells and particles, J. Electrost. 21, 151–191 (1988)CrossRef W.M. Arnold, U. Zimmermann: Electro-Rotation: Development of a technique for dielectric measurements on individual cells and particles, J. Electrost. 21, 151–191 (1988)CrossRef
18.128.
Zurück zum Zitat Y. Sun, B.J. Nelson: Autonomous injection of biological cells using visual servoing, Int. Symp. on Experimental Robotics (ISER 2000), Lect. Notes Contr. Inform. Sci. (2000) pp. 175–184 Y. Sun, B.J. Nelson: Autonomous injection of biological cells using visual servoing, Int. Symp. on Experimental Robotics (ISER 2000), Lect. Notes Contr. Inform. Sci. (2000) pp. 175–184
18.129.
Zurück zum Zitat Y. Sun, B.J. Nelson, D.P. Potasek, E. Enikov: A bulk microfabricated multi-axis capacitive cellular force sensor using transverse comb drives, J. Micromech. Microeng. 12, 832–840 (2002)CrossRef Y. Sun, B.J. Nelson, D.P. Potasek, E. Enikov: A bulk microfabricated multi-axis capacitive cellular force sensor using transverse comb drives, J. Micromech. Microeng. 12, 832–840 (2002)CrossRef
18.130.
Zurück zum Zitat Y. Sun, K. Wan, K.P. Roberts, J.C. Bischof, B.J. Nelson: Mechanical property characterization of mouse zona pellucida, IEEE Trans. Nanobiosci. 2, 279–286 (2003)CrossRef Y. Sun, K. Wan, K.P. Roberts, J.C. Bischof, B.J. Nelson: Mechanical property characterization of mouse zona pellucida, IEEE Trans. Nanobiosci. 2, 279–286 (2003)CrossRef
18.131.
Zurück zum Zitat A. Ashkin, J.M. Dziedzic: Optical trapping and manipulation of viruses and bacteria, Science 235, 1517–1520 (1987)CrossRef A. Ashkin, J.M. Dziedzic: Optical trapping and manipulation of viruses and bacteria, Science 235, 1517–1520 (1987)CrossRef
18.132.
Zurück zum Zitat F.H.C. Crick, A.F.W. Hughes: The physical properties of cytoplasm: A study by means of the magnetic particle method, Part I. Experimental Exp. Cell Res. 1, 37–80 (1950)CrossRef F.H.C. Crick, A.F.W. Hughes: The physical properties of cytoplasm: A study by means of the magnetic particle method, Part I. Experimental Exp. Cell Res. 1, 37–80 (1950)CrossRef
18.133.
Zurück zum Zitat M.F. Yu, M.J. Dyer, G.D. Skidmore, H.W. Rohrs, X.K. Lu, K.D. Ausman, J.R.V. Ehr, R.S. Ruoff: Three-dimensional manipulation of carbon nanotubes under a scanning electron microscope, Nanotechnology 10, 244–252 (1999)CrossRef M.F. Yu, M.J. Dyer, G.D. Skidmore, H.W. Rohrs, X.K. Lu, K.D. Ausman, J.R.V. Ehr, R.S. Ruoff: Three-dimensional manipulation of carbon nanotubes under a scanning electron microscope, Nanotechnology 10, 244–252 (1999)CrossRef
18.134.
Zurück zum Zitat L.X. Dong, F. Arai, T. Fukuda: 3D nanorobotic manipulation of nano-order objects inside SEM, Proc. of 2000 Int. Symp. on Micromechatronics and Human Science (MHS2000) (IEEE, Piscataway 2000) pp. 151–156 L.X. Dong, F. Arai, T. Fukuda: 3D nanorobotic manipulation of nano-order objects inside SEM, Proc. of 2000 Int. Symp. on Micromechatronics and Human Science (MHS2000) (IEEE, Piscataway 2000) pp. 151–156
18.135.
Zurück zum Zitat D.M. Eigler, E.K. Schweizer: Positioning single atoms with a scanning tunneling microscope, Nature 344, 524–526 (1990)CrossRef D.M. Eigler, E.K. Schweizer: Positioning single atoms with a scanning tunneling microscope, Nature 344, 524–526 (1990)CrossRef
18.136.
Zurück zum Zitat P. Avouris: Manipulation of matter at the atomic and molecular levels, Acc. Chem. Res. 28, 95–102 (1995)CrossRef P. Avouris: Manipulation of matter at the atomic and molecular levels, Acc. Chem. Res. 28, 95–102 (1995)CrossRef
18.137.
Zurück zum Zitat M.F. Crommie, C.P. Lutz, D.M. Eigler: Confinement of electrons to quantum corrals on a metal surface, Science 262, 218–220 (1993)CrossRef M.F. Crommie, C.P. Lutz, D.M. Eigler: Confinement of electrons to quantum corrals on a metal surface, Science 262, 218–220 (1993)CrossRef
18.138.
Zurück zum Zitat L.J. Whitman, J.A. Stroscio, R.A. Dragoset, R.J. Cellota: Manipulation of adsorbed atoms and creation of new structures on room-temperature surfaces with a scanning tunneling microscope, Science 251, 1206–1210 (1991)CrossRef L.J. Whitman, J.A. Stroscio, R.A. Dragoset, R.J. Cellota: Manipulation of adsorbed atoms and creation of new structures on room-temperature surfaces with a scanning tunneling microscope, Science 251, 1206–1210 (1991)CrossRef
18.139.
Zurück zum Zitat I.-W. Lyo, P. Avouris: Field-induced nanometer-scale to atomic-scale manipulation of silicon surfaces with the STM, Science 253, 173–176 (1991)CrossRef I.-W. Lyo, P. Avouris: Field-induced nanometer-scale to atomic-scale manipulation of silicon surfaces with the STM, Science 253, 173–176 (1991)CrossRef
18.140.
Zurück zum Zitat G. Dujardin, R.E. Walkup, P. Avouris: Dissociation of individual molecules with electrons from the tip of a scanning tunneling microscope, Science 255, 1232–1235 (1992)CrossRef G. Dujardin, R.E. Walkup, P. Avouris: Dissociation of individual molecules with electrons from the tip of a scanning tunneling microscope, Science 255, 1232–1235 (1992)CrossRef
18.141.
Zurück zum Zitat T.-C. Shen, C. Wang, G.C. Abeln, J.R. Tucker, J.W. Lyding, P. Avouris, R.E. Walkup: Atomic-scale desorption through electronic and vibrational-excitation mechanisms, Science 268, 1590–1592 (1995)CrossRef T.-C. Shen, C. Wang, G.C. Abeln, J.R. Tucker, J.W. Lyding, P. Avouris, R.E. Walkup: Atomic-scale desorption through electronic and vibrational-excitation mechanisms, Science 268, 1590–1592 (1995)CrossRef
18.142.
Zurück zum Zitat M.T. Cuberes, R.R. Schittler, J.K. Gimzewsk: Room-temperature repositioning of individual C60 molecules at Cu steps: operation of a molecular counting device, Appl. Phys. Lett. 69, 3016–3018 (1996)CrossRef M.T. Cuberes, R.R. Schittler, J.K. Gimzewsk: Room-temperature repositioning of individual C60 molecules at Cu steps: operation of a molecular counting device, Appl. Phys. Lett. 69, 3016–3018 (1996)CrossRef
18.143.
Zurück zum Zitat H.J. Lee, W. Ho: Single-bond formation and characterization with a scanning tunneling microscope, Science 286, 1719–1722 (1999)CrossRef H.J. Lee, W. Ho: Single-bond formation and characterization with a scanning tunneling microscope, Science 286, 1719–1722 (1999)CrossRef
18.144.
Zurück zum Zitat T. Yamamoto, O. Kurosawa, H. Kabata, N. Shimamoto, M. Washizu: Molecular surgery of DNA based on electrostatic micromanipulation, IEEE Trans. IA 36, 1010–1017 (2000) T. Yamamoto, O. Kurosawa, H. Kabata, N. Shimamoto, M. Washizu: Molecular surgery of DNA based on electrostatic micromanipulation, IEEE Trans. IA 36, 1010–1017 (2000)
18.145.
Zurück zum Zitat C. Haber, D. Wirtz: Magnetic tweezers for DNA micromanipulation,, Rev. Sci. Instrum. 71, 4561–4570 (2000)CrossRef C. Haber, D. Wirtz: Magnetic tweezers for DNA micromanipulation,, Rev. Sci. Instrum. 71, 4561–4570 (2000)CrossRef
18.146.
Zurück zum Zitat D.M. Schaefer, R. Reifenberger, A. Patil, R.P. Andres: Fabrication of two-dimensional arrays of nanometer-size clusters with the atomic force microscope, Appl. Phys. Lett. 66, 1012–1014 (1995)CrossRef D.M. Schaefer, R. Reifenberger, A. Patil, R.P. Andres: Fabrication of two-dimensional arrays of nanometer-size clusters with the atomic force microscope, Appl. Phys. Lett. 66, 1012–1014 (1995)CrossRef
18.147.
Zurück zum Zitat T. Junno, K. Deppert, L. Montelius, L. Samuelson: Controlled manipulation of nanoparticles with an atomic force microscope, Appl. Phys. Lett. 66, 3627–3629 (1995)CrossRef T. Junno, K. Deppert, L. Montelius, L. Samuelson: Controlled manipulation of nanoparticles with an atomic force microscope, Appl. Phys. Lett. 66, 3627–3629 (1995)CrossRef
18.148.
Zurück zum Zitat P.E. Sheehan, C.M. Lieber: Nanomachining, manipulation and fabrication by force microscopy, Nanotechnology 7, 236–240 (1996)CrossRef P.E. Sheehan, C.M. Lieber: Nanomachining, manipulation and fabrication by force microscopy, Nanotechnology 7, 236–240 (1996)CrossRef
18.149.
Zurück zum Zitat C. Baur, B.C. Gazen, B. Koel, T.R. Ramachandran, A.A.G. Requicha, L. Zini: Robotic nanomanipulation with a scanning probe microscope in a networked computing environment, J. Vac. Sci. Tech. B 15, 1577–1580 (1997)CrossRef C. Baur, B.C. Gazen, B. Koel, T.R. Ramachandran, A.A.G. Requicha, L. Zini: Robotic nanomanipulation with a scanning probe microscope in a networked computing environment, J. Vac. Sci. Tech. B 15, 1577–1580 (1997)CrossRef
18.150.
Zurück zum Zitat A.A.G. Requicha: Nanorobots, NEMS, and nanoassembly, Proc. IEEE 91, 1922–1933 (2003)CrossRef A.A.G. Requicha: Nanorobots, NEMS, and nanoassembly, Proc. IEEE 91, 1922–1933 (2003)CrossRef
18.151.
Zurück zum Zitat R. Resch, C. Baur, A. Bugacov, B.E. Koel, A. Madhukar, A.A.G. Requicha, P. Will: Building and manipulating 3-D and linked 2-D structures of nanoparticles using scanning force microscopy, Langmuir 14, 6613–6616 (1998)CrossRef R. Resch, C. Baur, A. Bugacov, B.E. Koel, A. Madhukar, A.A.G. Requicha, P. Will: Building and manipulating 3-D and linked 2-D structures of nanoparticles using scanning force microscopy, Langmuir 14, 6613–6616 (1998)CrossRef
18.152.
Zurück zum Zitat J. Hu, Z.-H. Zhang, Z.-Q. Ouyang, S.-F. Chen, M.-Q. Li, F.-J. Yang: Stretch and align virus in nanometer scale on an atomically flat surface, J. Vac. Sci. Tech. B 16, 2841–2843 (1998)CrossRef J. Hu, Z.-H. Zhang, Z.-Q. Ouyang, S.-F. Chen, M.-Q. Li, F.-J. Yang: Stretch and align virus in nanometer scale on an atomically flat surface, J. Vac. Sci. Tech. B 16, 2841–2843 (1998)CrossRef
18.153.
Zurück zum Zitat M. Sitti, S. Horiguchi, H. Hashimoto: Controlled pushing of nanoparticles: modeling and experiments, IEEE/ASME Trans. Mechatron. 5, 199–211 (2000)CrossRef M. Sitti, S. Horiguchi, H. Hashimoto: Controlled pushing of nanoparticles: modeling and experiments, IEEE/ASME Trans. Mechatron. 5, 199–211 (2000)CrossRef
18.154.
Zurück zum Zitat M. Guthold, M.R. Falvo, W.G. Matthews, S. Paulson, S. Washburn, D.A. Erie, R. Superfine, J.F.P. Brooks, I.R.M. Taylor: Controlled manipulation of molecular samples with the nanoManipulator, IEEE/ASME Trans. Mechatron. 5, 189–198 (2000)CrossRef M. Guthold, M.R. Falvo, W.G. Matthews, S. Paulson, S. Washburn, D.A. Erie, R. Superfine, J.F.P. Brooks, I.R.M. Taylor: Controlled manipulation of molecular samples with the nanoManipulator, IEEE/ASME Trans. Mechatron. 5, 189–198 (2000)CrossRef
18.155.
Zurück zum Zitat G.Y. Li, N. Xi, M.M. Yu, W.K. Fung: Development of augmented reality system for AFM-based nanomanipulation, IEEE/ASME Trans. Mechatron. 9, 358–365 (2004)CrossRef G.Y. Li, N. Xi, M.M. Yu, W.K. Fung: Development of augmented reality system for AFM-based nanomanipulation, IEEE/ASME Trans. Mechatron. 9, 358–365 (2004)CrossRef
18.156.
Zurück zum Zitat F. Arai, D. Andou, T. Fukuda: Micro manipulation based on micro physics–strategy based on attractive force reduction and stress measurement, Proc. of IEEE/RSJ Int. Conf. on Intelligent Robotics and Systems (IEEE, Piscataway 1995) pp. 236–241 F. Arai, D. Andou, T. Fukuda: Micro manipulation based on micro physics–strategy based on attractive force reduction and stress measurement, Proc. of IEEE/RSJ Int. Conf. on Intelligent Robotics and Systems (IEEE, Piscataway 1995) pp. 236–241
18.157.
Zurück zum Zitat H.W.P. Koops, J. Kretz, M. Rudolph, M. Weber, G. Dahm, K.L. Lee: Characterization and application of materials grown by electron-beam-induced deposition, Jpn. J. Appl. Phys. 33, 7099–7107 (1994), Part 1CrossRef H.W.P. Koops, J. Kretz, M. Rudolph, M. Weber, G. Dahm, K.L. Lee: Characterization and application of materials grown by electron-beam-induced deposition, Jpn. J. Appl. Phys. 33, 7099–7107 (1994), Part 1CrossRef
18.158.
Zurück zum Zitat S. Iijima: Helical microtubules of graphitic carbon, Nature 354, 56–58 (1991)CrossRef S. Iijima: Helical microtubules of graphitic carbon, Nature 354, 56–58 (1991)CrossRef
18.159.
Zurück zum Zitat S.J. Tans, A.R.M. Verchueren, C. Dekker: Room-temperature transistor based on a single carbon nanotube, Nature 393, 49–52 (1998)CrossRef S.J. Tans, A.R.M. Verchueren, C. Dekker: Room-temperature transistor based on a single carbon nanotube, Nature 393, 49–52 (1998)CrossRef
18.160.
Zurück zum Zitat R.H. Baughman, A.A. Zakhidov, W.A. de Heer: Carbon nanotubes-the route toward applications, Science 297, 787–792 (2002)CrossRef R.H. Baughman, A.A. Zakhidov, W.A. de Heer: Carbon nanotubes-the route toward applications, Science 297, 787–792 (2002)CrossRef
18.161.
Zurück zum Zitat M.J. Treacy, T.W. Ebbesen, J.M. Gibson: Exceptionally high Youngʼs modulus observed for individual carbon nanotubes, Nature 381, 678–680 (1996)CrossRef M.J. Treacy, T.W. Ebbesen, J.M. Gibson: Exceptionally high Youngʼs modulus observed for individual carbon nanotubes, Nature 381, 678–680 (1996)CrossRef
18.162.
Zurück zum Zitat P. Poncharal, Z.L. Wang, D. Ugarte, W.A. de Heer: Electrostatic deflections and electromechanical resonances of carbon nanotubes, Science 283, 1513–1516 (1999)CrossRef P. Poncharal, Z.L. Wang, D. Ugarte, W.A. de Heer: Electrostatic deflections and electromechanical resonances of carbon nanotubes, Science 283, 1513–1516 (1999)CrossRef
18.163.
Zurück zum Zitat M.F. Yu, O. Lourie, M.J. Dyer, K. Moloni, T.F. Kelley, R.S. Ruoff: Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load, Science 287, 637–640 (2000)CrossRef M.F. Yu, O. Lourie, M.J. Dyer, K. Moloni, T.F. Kelley, R.S. Ruoff: Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load, Science 287, 637–640 (2000)CrossRef
18.164.
Zurück zum Zitat T.W. Ebbesen, H.J. Lezec, H. Hiura, J.W. Bennett, H.F. Ghaemi, T. Thio: Electrical conductivity of individual carbon nanotubes, Nature 382, 54–56 (1996)CrossRef T.W. Ebbesen, H.J. Lezec, H. Hiura, J.W. Bennett, H.F. Ghaemi, T. Thio: Electrical conductivity of individual carbon nanotubes, Nature 382, 54–56 (1996)CrossRef
18.165.
Zurück zum Zitat P. Kim, L. Shi, A. Majumdar, P.L. McEuen: Thermal transport measurements of individual multiwalled nanotubes, Phys. Rev. Lett. 87, 215502 (2001)CrossRef P. Kim, L. Shi, A. Majumdar, P.L. McEuen: Thermal transport measurements of individual multiwalled nanotubes, Phys. Rev. Lett. 87, 215502 (2001)CrossRef
18.166.
Zurück zum Zitat W.J. Liang, M. Bockrath, D. Bozovic, J.H. Hafner, M. Tinkham, H. Park: Fabry-Perot interference in a nanotube electron waveguide, Nature 411, 665–669 (2001)CrossRef W.J. Liang, M. Bockrath, D. Bozovic, J.H. Hafner, M. Tinkham, H. Park: Fabry-Perot interference in a nanotube electron waveguide, Nature 411, 665–669 (2001)CrossRef
18.167.
Zurück zum Zitat X.B. Zhang, D. Bernaerts, G.V. Tendeloo, S. Amelincks, J.V. Landuyt, V. Ivanov, J.B. Nagy, P. Lambin, A.A. Lucas: The texture of catalytically grown coil-shaped carbon nanotubules, Europhys. Lett. 27, 141–146 (1994)CrossRef X.B. Zhang, D. Bernaerts, G.V. Tendeloo, S. Amelincks, J.V. Landuyt, V. Ivanov, J.B. Nagy, P. Lambin, A.A. Lucas: The texture of catalytically grown coil-shaped carbon nanotubules, Europhys. Lett. 27, 141–146 (1994)CrossRef
18.168.
Zurück zum Zitat X.Y. Kong, Z.L. Wang: Spontaneous polarization-induced nanohelixes, nanosprings, and nanorings of piezoelectric nanobelts, Nano. Lett. 3, 1625–1631 (2003)CrossRef X.Y. Kong, Z.L. Wang: Spontaneous polarization-induced nanohelixes, nanosprings, and nanorings of piezoelectric nanobelts, Nano. Lett. 3, 1625–1631 (2003)CrossRef
18.169.
Zurück zum Zitat S.V. Golod, V.Y. Prinz, V.I. Mashanov, A.K. Gutakovsky: Fabrication of conducting GeSi/Si micro- and nanotubes and helical microcoils, Semicond. Sci. Technol. 16, 181–185 (2001)CrossRef S.V. Golod, V.Y. Prinz, V.I. Mashanov, A.K. Gutakovsky: Fabrication of conducting GeSi/Si micro- and nanotubes and helical microcoils, Semicond. Sci. Technol. 16, 181–185 (2001)CrossRef
18.170.
Zurück zum Zitat L. Zhang, E. Deckhardt, A. Weber, C. Schönenberger, D. Grützmacher: Controllable fabrication of SiGe/Si and SiGe/Si/Cr helical nanobelts, Nanotechnology 16, 655–663 (2005)CrossRef L. Zhang, E. Deckhardt, A. Weber, C. Schönenberger, D. Grützmacher: Controllable fabrication of SiGe/Si and SiGe/Si/Cr helical nanobelts, Nanotechnology 16, 655–663 (2005)CrossRef
18.171.
Zurück zum Zitat L. Zhang, E. Ruh, D. Grützmacher, L.X. Dong, D.J. Bell, B.J. Nelson, C. Schönenberger: Anomalous coiling of SiGe/Si and SiGe/Si/Cr helical nanobelts, Nano Lett. 6, 1311–1317 (2006)CrossRef L. Zhang, E. Ruh, D. Grützmacher, L.X. Dong, D.J. Bell, B.J. Nelson, C. Schönenberger: Anomalous coiling of SiGe/Si and SiGe/Si/Cr helical nanobelts, Nano Lett. 6, 1311–1317 (2006)CrossRef
18.172.
Zurück zum Zitat D.J. Bell, L.X. Dong, B.J. Nelson, M. Golling, L. Zhang, D. Grützmacher: Fabrication and characterization of three-dimensional InGaAs/GaAs nanosprings, Nano Lett. 6, 725–729 (2006)CrossRef D.J. Bell, L.X. Dong, B.J. Nelson, M. Golling, L. Zhang, D. Grützmacher: Fabrication and characterization of three-dimensional InGaAs/GaAs nanosprings, Nano Lett. 6, 725–729 (2006)CrossRef
18.173.
Zurück zum Zitat D.J. Bell, Y. Sun, L. Zhang, L.X. Dong, B.J. Nelson, D. Grutzmacher: Three-dimensional nanosprings for electromechanical sensors, Sens. Actuat. A-Physical 130, 54–61 (2006)CrossRef D.J. Bell, Y. Sun, L. Zhang, L.X. Dong, B.J. Nelson, D. Grutzmacher: Three-dimensional nanosprings for electromechanical sensors, Sens. Actuat. A-Physical 130, 54–61 (2006)CrossRef
18.174.
Zurück zum Zitat R. Martel, T. Schmidt, H.R. Shea, T. Herte, P. Avouris: Single- and multi-wall carbon nanotube field-effect transistors, Appl. Phys. Lett. 73, 2447–2449 (1998)CrossRef R. Martel, T. Schmidt, H.R. Shea, T. Herte, P. Avouris: Single- and multi-wall carbon nanotube field-effect transistors, Appl. Phys. Lett. 73, 2447–2449 (1998)CrossRef
18.175.
Zurück zum Zitat N.R. Franklin, Y.M. Li, R.J. Chen, A. Javey, H.J. Dai: Patterned growth of single-walled carbon nanotubes on full 4-inch wafers, Appl. Phys. Lett. 79, 4571–4573 (2001)CrossRef N.R. Franklin, Y.M. Li, R.J. Chen, A. Javey, H.J. Dai: Patterned growth of single-walled carbon nanotubes on full 4-inch wafers, Appl. Phys. Lett. 79, 4571–4573 (2001)CrossRef
18.176.
Zurück zum Zitat T. Rueckes, K. Kim, E. Joselevich, G.Y. Tseng, C.-L. Cheung, C.M. Lieber: Carbon nanotube-based non-volatile random access memory for molecular computing science, Science 289, 94–97 (2000)CrossRef T. Rueckes, K. Kim, E. Joselevich, G.Y. Tseng, C.-L. Cheung, C.M. Lieber: Carbon nanotube-based non-volatile random access memory for molecular computing science, Science 289, 94–97 (2000)CrossRef
18.177.
Zurück zum Zitat A. Subramanian, B. Vikramaditya, L.X. Dong, D.J. Bell, B.J. Nelson: Micro and Nanorobotic Assembly Using Dielectrophoresis. In: Robotics: Science and Systems I, ed. by S. Thrun, G.S. Sukhatme, S. Schaal, O. Brock (MIT Press, Cambridge 2005) pp. 327–334 A. Subramanian, B. Vikramaditya, L.X. Dong, D.J. Bell, B.J. Nelson: Micro and Nanorobotic Assembly Using Dielectrophoresis. In: Robotics: Science and Systems I, ed. by S. Thrun, G.S. Sukhatme, S. Schaal, O. Brock (MIT Press, Cambridge 2005) pp. 327–334
18.178.
Zurück zum Zitat C.K.M. Fung, V.T.S. Wong, R.H.M. Chan, W.J. Li: Dielectrophoretic batch fabrication of bundled carbon nanotube thermal sensors, IEEE Trans. Nanotech. 3, 395–403 (2004)CrossRef C.K.M. Fung, V.T.S. Wong, R.H.M. Chan, W.J. Li: Dielectrophoretic batch fabrication of bundled carbon nanotube thermal sensors, IEEE Trans. Nanotech. 3, 395–403 (2004)CrossRef
18.179.
Zurück zum Zitat T. Fukuda, F. Arai, L.X. Dong: Assembly of nanodevices with carbon nanotubes through nanorobotic manipulations, Proc. IEEE 91, 1803–1818 (2003)CrossRef T. Fukuda, F. Arai, L.X. Dong: Assembly of nanodevices with carbon nanotubes through nanorobotic manipulations, Proc. IEEE 91, 1803–1818 (2003)CrossRef
18.180.
Zurück zum Zitat E.W. Wong, P.E. Sheehan, C.M. Lieber: Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes, Science 277, 1971–1975 (1997)CrossRef E.W. Wong, P.E. Sheehan, C.M. Lieber: Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes, Science 277, 1971–1975 (1997)CrossRef
18.181.
Zurück zum Zitat M.R. Falvo, G.J. Clary, R.M. Taylor, V. Chi, F.P. Brooks, S. Washburn, R. Superfine: Bending and buckling of carbon nanotubes under large strain, Nature 389, 582–584 (1997)CrossRef M.R. Falvo, G.J. Clary, R.M. Taylor, V. Chi, F.P. Brooks, S. Washburn, R. Superfine: Bending and buckling of carbon nanotubes under large strain, Nature 389, 582–584 (1997)CrossRef
18.182.
Zurück zum Zitat H.W.C. Postma, A. Sellmeijer, C. Dekker: Manipulation and imaging of individual single-walled carbon nanotubes with an atomic force microscope, Adv. Mater. 12, 1299–1302 (2000)CrossRef H.W.C. Postma, A. Sellmeijer, C. Dekker: Manipulation and imaging of individual single-walled carbon nanotubes with an atomic force microscope, Adv. Mater. 12, 1299–1302 (2000)CrossRef
18.183.
Zurück zum Zitat T. Hertel, R. Martel, P. Avouris: Manipulation of individual carbon nanotubes and their interaction with surfaces, J. Phys. Chem. B 102, 910–915 (1998)CrossRef T. Hertel, R. Martel, P. Avouris: Manipulation of individual carbon nanotubes and their interaction with surfaces, J. Phys. Chem. B 102, 910–915 (1998)CrossRef
18.184.
Zurück zum Zitat P. Avouris, T. Hertel, R. Martel, T. Schmidt, H.R. Shea, R.E. Walkup: Carbon nanotubes: nanomechanics, manipulation, and electronic devices, Appl. Surf. Sci. 141, 201–209 (1999)CrossRef P. Avouris, T. Hertel, R. Martel, T. Schmidt, H.R. Shea, R.E. Walkup: Carbon nanotubes: nanomechanics, manipulation, and electronic devices, Appl. Surf. Sci. 141, 201–209 (1999)CrossRef
18.185.
Zurück zum Zitat M. Ahlskog, R. Tarkiainen, L. Roschier, P. Hakonen: Single-electron transistor made of two crossing multiwalled carbon nanotubes and its noise properties, Appl. Phys. Lett. 77, 4037–4039 (2000)CrossRef M. Ahlskog, R. Tarkiainen, L. Roschier, P. Hakonen: Single-electron transistor made of two crossing multiwalled carbon nanotubes and its noise properties, Appl. Phys. Lett. 77, 4037–4039 (2000)CrossRef
18.186.
Zurück zum Zitat M.R. Falvo, R.M.I. Taylor, A. Helser, V. Chi, F.P.J. Brooks, S. Washburn, R. Superfine: Nanometre-scale rolling and sliding of carbon nanotubes, Nature 397, 236–238 (1999)CrossRef M.R. Falvo, R.M.I. Taylor, A. Helser, V. Chi, F.P.J. Brooks, S. Washburn, R. Superfine: Nanometre-scale rolling and sliding of carbon nanotubes, Nature 397, 236–238 (1999)CrossRef
18.187.
Zurück zum Zitat B. Bhushan, V.N. Koinkar: Nanoindentation Hardness Measurements Using Atomic-Force Microscopy, Appl. Phys. Lett. 64, 1653–1655 (1994)CrossRef B. Bhushan, V.N. Koinkar: Nanoindentation Hardness Measurements Using Atomic-Force Microscopy, Appl. Phys. Lett. 64, 1653–1655 (1994)CrossRef
18.188.
Zurück zum Zitat P. Vettiger, G. Cross, M. Despont, U. Drechsler, U. Durig, B. Gotsmann, W. Haberle, M.A. Lantz, H.E. Rothuizen, R. Stutz, G.K. Binnig: The “millipede” - Nanotechnology entering data storage, IEEE Trans. Nanotechnol. 1, 39–55 (2002)CrossRef P. Vettiger, G. Cross, M. Despont, U. Drechsler, U. Durig, B. Gotsmann, W. Haberle, M.A. Lantz, H.E. Rothuizen, R. Stutz, G.K. Binnig: The “millipede” - Nanotechnology entering data storage, IEEE Trans. Nanotechnol. 1, 39–55 (2002)CrossRef
18.189.
Zurück zum Zitat L.X. Dong: Nanorobotic manipulations of carbon nanotubes. Ph.D. Thesis (Nagoya University, Nagoya 2003) L.X. Dong: Nanorobotic manipulations of carbon nanotubes. Ph.D. Thesis (Nagoya University, Nagoya 2003)
18.190.
Zurück zum Zitat J.H. Hafner, C.-L. Cheung, T.H. Oosterkamp, C.M. Lieber: High-yield assembly of individual single-walled carbon nanotube tips for scanning probe microscopies, J. Phys. Chem. B 105, 743–746 (2001)CrossRef J.H. Hafner, C.-L. Cheung, T.H. Oosterkamp, C.M. Lieber: High-yield assembly of individual single-walled carbon nanotube tips for scanning probe microscopies, J. Phys. Chem. B 105, 743–746 (2001)CrossRef
18.191.
Zurück zum Zitat L.X. Dong, F. Arai, T. Fukuda: Electron-beam-induced deposition with carbon nanotube emitters, Appl. Phys. Lett. 81, 1919–1921 (2002)CrossRef L.X. Dong, F. Arai, T. Fukuda: Electron-beam-induced deposition with carbon nanotube emitters, Appl. Phys. Lett. 81, 1919–1921 (2002)CrossRef
18.192.
Zurück zum Zitat L.X. Dong, F. Arai, T. Fukuda: 3D nanorobotic manipulations of multi-walled carbon nanotubes, Proc. of 2001 IEEE Int. Conf. on Robotics and Automation (ICRA2001) (IEEE, Piscataway 2001) pp. 632–637 L.X. Dong, F. Arai, T. Fukuda: 3D nanorobotic manipulations of multi-walled carbon nanotubes, Proc. of 2001 IEEE Int. Conf. on Robotics and Automation (ICRA2001) (IEEE, Piscataway 2001) pp. 632–637
18.193.
Zurück zum Zitat L.X. Dong, F. Arai, T. Fukuda: Destructive constructions of nanostructures with carbon nanotubes through nanorobotic manipulation, IEEE/ASME Trans. Mechatron. 9, 350–357 (2004)CrossRef L.X. Dong, F. Arai, T. Fukuda: Destructive constructions of nanostructures with carbon nanotubes through nanorobotic manipulation, IEEE/ASME Trans. Mechatron. 9, 350–357 (2004)CrossRef
18.194.
Zurück zum Zitat J. Cumings, P.G. Collins, A. Zettl: Peeling and sharpening multiwall nanotubes, Nature 406, 58 (2000) J. Cumings, P.G. Collins, A. Zettl: Peeling and sharpening multiwall nanotubes, Nature 406, 58 (2000)
18.195.
Zurück zum Zitat J. Cumings, A. Zettl: Low-friction nanoscale linear bearing realized from multiwall carbon nanotubes, Science 289, 602–604 (2000)CrossRef J. Cumings, A. Zettl: Low-friction nanoscale linear bearing realized from multiwall carbon nanotubes, Science 289, 602–604 (2000)CrossRef
18.196.
Zurück zum Zitat A. Kis, K. Jensen, S. Aloni, W. Mickelson, A. Zettl: Interlayer forces and ultralow sliding friction in multiwalled carbon nanotubes, Phys. Rev. Lett. 97, 025501 (2006)CrossRef A. Kis, K. Jensen, S. Aloni, W. Mickelson, A. Zettl: Interlayer forces and ultralow sliding friction in multiwalled carbon nanotubes, Phys. Rev. Lett. 97, 025501 (2006)CrossRef
18.197.
Zurück zum Zitat L.X. Dong, F. Arai, T. Fukuda: Nanoassembly of carbon nanotubes through mechanochemical nanorobotic manipulations, Jpn. J. Appl. Phys. 42, 295–298 (2003), Part 1CrossRef L.X. Dong, F. Arai, T. Fukuda: Nanoassembly of carbon nanotubes through mechanochemical nanorobotic manipulations, Jpn. J. Appl. Phys. 42, 295–298 (2003), Part 1CrossRef
18.198.
Zurück zum Zitat L. Chico, V.H. Crespi, L.X. Benedict, S.G. Louie, M.L. Cohen: Pure carbon nanoscale devices: Nanotube heterojunctions, Phys. Rev. Lett. 76, 971–974 (1996)CrossRef L. Chico, V.H. Crespi, L.X. Benedict, S.G. Louie, M.L. Cohen: Pure carbon nanoscale devices: Nanotube heterojunctions, Phys. Rev. Lett. 76, 971–974 (1996)CrossRef
18.199.
Zurück zum Zitat Z. Yao, H.W.C. Postma, L. Balents, C. Dekker: Carbon nanotube intramolecular junctions, Nature 402, 273–276 (1999)CrossRef Z. Yao, H.W.C. Postma, L. Balents, C. Dekker: Carbon nanotube intramolecular junctions, Nature 402, 273–276 (1999)CrossRef
18.200.
Zurück zum Zitat H.W.C. Postma, T. Teepen, Z. Yao, M. Grifoni, C. Dekker: Carbon nanotube single-electron transistors at room temperature, Science 293, 76–79 (2001)CrossRef H.W.C. Postma, T. Teepen, Z. Yao, M. Grifoni, C. Dekker: Carbon nanotube single-electron transistors at room temperature, Science 293, 76–79 (2001)CrossRef
18.201.
Zurück zum Zitat M.S. Fuhrer, J. Nygård, L. Shih, M. Forero, Y.-G. Yoon, M.S.C. Mazzoni, H.J. Choi, J. Ihm, S.G. Louie, A. Zettl, P.L. McEuen: Crossed nanotube junctions, Science 288, 494–497 (2000)CrossRef M.S. Fuhrer, J. Nygård, L. Shih, M. Forero, Y.-G. Yoon, M.S.C. Mazzoni, H.J. Choi, J. Ihm, S.G. Louie, A. Zettl, P.L. McEuen: Crossed nanotube junctions, Science 288, 494–497 (2000)CrossRef
18.202.
Zurück zum Zitat T. Rueckes, K. Kim, E. Joselevich, G.Y. Tseng, C.-L. Cheung, C.M. Lieber: Carbon nanotube-based nonvolatile random access memory for molecular computing science, Science 289, 94–97 (2000)CrossRef T. Rueckes, K. Kim, E. Joselevich, G.Y. Tseng, C.-L. Cheung, C.M. Lieber: Carbon nanotube-based nonvolatile random access memory for molecular computing science, Science 289, 94–97 (2000)CrossRef
18.203.
Zurück zum Zitat A.G. Rinzler, J.H. Hafner, P. Nikolaev, L. Lou, S.G. Kim, D. Tománek, P. Nordlander, D.T. Colbert, R.E. Smalley: Unraveling nanotubes: field emission from an atomic wire, Science 269, 1550–1553 (1995)CrossRef A.G. Rinzler, J.H. Hafner, P. Nikolaev, L. Lou, S.G. Kim, D. Tománek, P. Nordlander, D.T. Colbert, R.E. Smalley: Unraveling nanotubes: field emission from an atomic wire, Science 269, 1550–1553 (1995)CrossRef
18.204.
Zurück zum Zitat S.C. Minne, G. Yaralioglu, S.R. Manalis, J.D. Adams, J. Zesch, A. Atalar, C.F. Quate: Automated parallel high-speed atomic force microscopy, Appl. Phys. Lett. 72, 2340–2342 (1998)CrossRef S.C. Minne, G. Yaralioglu, S.R. Manalis, J.D. Adams, J. Zesch, A. Atalar, C.F. Quate: Automated parallel high-speed atomic force microscopy, Appl. Phys. Lett. 72, 2340–2342 (1998)CrossRef
18.205.
Zurück zum Zitat G.D. Skidmore, E. Parker, M. Ellis, N. Sarkar, R. Merkle: Exponential assembly, Nanotechnology 11, 316–321 (2001)CrossRef G.D. Skidmore, E. Parker, M. Ellis, N. Sarkar, R. Merkle: Exponential assembly, Nanotechnology 11, 316–321 (2001)CrossRef
18.206.
Zurück zum Zitat H.J. Dai, J.H. Hafner, A.G. Rinzler, D.T. Colbert, R.E. Smalley: Nanotubes as nanoprobes in scanning probe microscopy, Nature 384, 147–150 (1996)CrossRef H.J. Dai, J.H. Hafner, A.G. Rinzler, D.T. Colbert, R.E. Smalley: Nanotubes as nanoprobes in scanning probe microscopy, Nature 384, 147–150 (1996)CrossRef
18.207.
Zurück zum Zitat J.H. Hafner, C.L. Cheung, C.M. Lieber: Growth of nanotubes for probe microscopy tips, Nature 398, 761–762 (1999)CrossRef J.H. Hafner, C.L. Cheung, C.M. Lieber: Growth of nanotubes for probe microscopy tips, Nature 398, 761–762 (1999)CrossRef
18.208.
Zurück zum Zitat L.X. Dong, B.J. Nelson, T. Fukuda, F. Arai: Towards Nanotube Linear Servomotors, IEEE Trans. Autom. Sci. Eng. 3, 228–235 (2006)CrossRef L.X. Dong, B.J. Nelson, T. Fukuda, F. Arai: Towards Nanotube Linear Servomotors, IEEE Trans. Autom. Sci. Eng. 3, 228–235 (2006)CrossRef
18.209.
Zurück zum Zitat Y.H. Gao, Y. Bando: Carbon nanothermometer containing gallium, Nature 415, 599 (2002)CrossRef Y.H. Gao, Y. Bando: Carbon nanothermometer containing gallium, Nature 415, 599 (2002)CrossRef
18.210.
Zurück zum Zitat L.X. Dong, X.Y. Tao, L. Zhang, B.J. Nelson, X.B. Zhang: Nanorobotic spot welding: Controlled metal deposition with attogram precision from Copper-filled carbon nanotubes, Nano Lett. 7, 58–63 (2007)CrossRef L.X. Dong, X.Y. Tao, L. Zhang, B.J. Nelson, X.B. Zhang: Nanorobotic spot welding: Controlled metal deposition with attogram precision from Copper-filled carbon nanotubes, Nano Lett. 7, 58–63 (2007)CrossRef
18.211.
Zurück zum Zitat S.W. Lee, D.S. Lee, R.E. Morjan, S.H. Jhang, M. Sveningsson, O.A. Nerushev, Y.W. Park, E.E.B. Campbell: A three-terminal carbon nano-relay, Nano Lett. 4, 2027–2030 (2004)CrossRef S.W. Lee, D.S. Lee, R.E. Morjan, S.H. Jhang, M. Sveningsson, O.A. Nerushev, Y.W. Park, E.E.B. Campbell: A three-terminal carbon nano-relay, Nano Lett. 4, 2027–2030 (2004)CrossRef
18.212.
Zurück zum Zitat A.M. Fennimore, T.D. Yuzvinsky, W.-Q. Han, M.S. Fuhrer, J. Cumings, A. Zettl: Rotational actuators based on carbon nanotubes, Nature 424, 408–410 (2003)CrossRef A.M. Fennimore, T.D. Yuzvinsky, W.-Q. Han, M.S. Fuhrer, J. Cumings, A. Zettl: Rotational actuators based on carbon nanotubes, Nature 424, 408–410 (2003)CrossRef
18.213.
Zurück zum Zitat A. Subramanian, L.X. Dong, J. Tharian, U. Sennhauser, B.J. Nelson: Batch fabrication of carbon nanotube bearings, Nanotechnology 18, 075703 (2007)CrossRef A. Subramanian, L.X. Dong, J. Tharian, U. Sennhauser, B.J. Nelson: Batch fabrication of carbon nanotube bearings, Nanotechnology 18, 075703 (2007)CrossRef
18.214.
Zurück zum Zitat P. Kim, C.M. Lieber: Nanotube nanotweezers, Science 286, 2148–2150 (1999)CrossRef P. Kim, C.M. Lieber: Nanotube nanotweezers, Science 286, 2148–2150 (1999)CrossRef
18.215.
Zurück zum Zitat L.X. Dong, A. Subramanian, D. Hugentobler, B.J. Nelson, Y. Sun: Nano Encoders based on Vertical Arrays of Individual Carbon Nanotubes, Adv. Robot. 20, 1281–1301 (2006)CrossRef L.X. Dong, A. Subramanian, D. Hugentobler, B.J. Nelson, Y. Sun: Nano Encoders based on Vertical Arrays of Individual Carbon Nanotubes, Adv. Robot. 20, 1281–1301 (2006)CrossRef
18.216.
Zurück zum Zitat I. Asimov: Fantastic Voyage (Bantam Books, New York 1966) I. Asimov: Fantastic Voyage (Bantam Books, New York 1966)
18.217.
Zurück zum Zitat R.A. Freitas: Nanomedicine, Volume I: Basic Capabilities (Landes Bioscience, Austin 1999) R.A. Freitas: Nanomedicine, Volume I: Basic Capabilities (Landes Bioscience, Austin 1999)
Metadaten
Titel
Micro/Nanorobots
verfasst von
Bradley J. Nelson, Prof
Lixin Dong, Prof
Fumihito Arai, Prof
Copyright-Jahr
2008
DOI
https://doi.org/10.1007/978-3-540-30301-5_19

Neuer Inhalt