Skip to main content
Erschienen in: Metals and Materials International 6/2020

13.02.2020

Microstructure and Charpy Impact Properties of FCAW and SAW Heat Affected Zones of 100 mm Thick Steel Plate for Offshore Platforms

verfasst von: Dongki Choi, Hun Lee, Sung-Kyu Cho, Hyoung Chan Kim, Soong-Keun Hyun, Sang Yong Shin

Erschienen in: Metals and Materials International | Ausgabe 6/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

In this study, heat affected zone (HAZ) specimens were fabricated by applying flux-cored arc welding (FCAW) and submerged arc welding (SAW) processes to steel plate with a thickness of 100 mm and yield strength of 460 MPa for use in offshore platforms. The correlation between microstructure and Charpy absorbed energy was investigated, and fracture mechanisms were analyzed. As distance from the fusion line increases, heat input and cooling rate decrease, making it difficult to form low-temperature transformation microstructures in HAZ specimens and increasing the grain size of quasi-polygonal ferrite. The FCAW process is advantageous for low-temperature transformation microstructures because it has a lower heat input and a faster cooling rate than the SAW process. Plastic deformation and ductile fracture occurred at low temperatures in fine acicular ferrite and quasi-polygonal ferrite regions of HAZ specimens, but brittle fractures occurred in bainitic ferrite, granular bainite, and coarse quasi-polygonal ferrite regions. The unit crack path in the brittle fracture region was similar to the grain size. In other words, as the volume fraction of fine acicular ferrite and quasi-polygonal ferrite increased in HAZ specimens, Charpy absorbed energy at low temperature increased.

Graphic Abstract

  • 100 mm thick steel plate with yield strength of 460 MPa for offshore platforms is fabricated by TMCP.
  • The SAW and FCAW HAZ specimens are consisted of AF, QPF, and small amounts of GB, BF, and secondary phases. Secondary phases are evenly distributed of the HAZ specimens. So the average Charpy absorbed energy at − 20 °C of the SAW and FCAWHAZ are very high at 100 and 230 J, respectively.
  • Plastic deformation occurred around the AF grain, leading to ductile fracture, while brittle fracture occurred without plastic deformation around the BF and GB grains, resulting in long unit crack paths.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat T. Araki, Atlas for Bainitic Microstructures (ISIJ, Tokyo, 1992), pp. 1−100 T. Araki, Atlas for Bainitic Microstructures (ISIJ, Tokyo, 1992), pp. 1−100
4.
Zurück zum Zitat C. Yu, T.C. Yang, C.Y. Huang, R.K. Shiue, Metall. Mater. Trans. A 47A, 4777 (2016)CrossRef C. Yu, T.C. Yang, C.Y. Huang, R.K. Shiue, Metall. Mater. Trans. A 47A, 4777 (2016)CrossRef
5.
Zurück zum Zitat Offshore Standard, Metallic materials, DNV-GL-OS-B101. (DNVGL, Norway, 2015), pp. 1–69 Offshore Standard, Metallic materials, DNV-GL-OS-B101. (DNVGL, Norway, 2015), pp. 1–69
6.
Zurück zum Zitat X. Di, M. Tong, C. Li, C. Zhao, D. Wang, Mater. Sci. Eng. A 743, 67 (2019)CrossRef X. Di, M. Tong, C. Li, C. Zhao, D. Wang, Mater. Sci. Eng. A 743, 67 (2019)CrossRef
7.
Zurück zum Zitat B. Hwang, C.G. Lee, S.J. Kim, Metall. Mater. Trans. A 42A, 717 (2011)CrossRef B. Hwang, C.G. Lee, S.J. Kim, Metall. Mater. Trans. A 42A, 717 (2011)CrossRef
9.
Zurück zum Zitat J.S. Lee, S.H. Jeong, D.Y. Lim, J.O. Yun, M.H. Kim, Met. Mater Int. 16, 827 (2012)CrossRef J.S. Lee, S.H. Jeong, D.Y. Lim, J.O. Yun, M.H. Kim, Met. Mater Int. 16, 827 (2012)CrossRef
10.
Zurück zum Zitat C. Pandey, M.M. Mahapatra, P. Kumar, A. Giri, Met. Mater Int. 23, 900 (2017)CrossRef C. Pandey, M.M. Mahapatra, P. Kumar, A. Giri, Met. Mater Int. 23, 900 (2017)CrossRef
11.
Zurück zum Zitat Z. Yao, G. Xu, Z. Jiang, J. Tian, Q. Yuan, H. Ma, Met. Mater Int. 25, 1151 (2019)CrossRef Z. Yao, G. Xu, Z. Jiang, J. Tian, Q. Yuan, H. Ma, Met. Mater Int. 25, 1151 (2019)CrossRef
12.
Zurück zum Zitat Design of Offshore Steel Structures, General-LRFD method, DNVGL-OS-C101 (DNVGL, Norway, 2011), pp. 1–85 Design of Offshore Steel Structures, General-LRFD method, DNVGL-OS-C101 (DNVGL, Norway, 2011), pp. 1–85
13.
14.
Zurück zum Zitat X. Li, Y. Fan, X. Ma, S.V. Subramanian, C. Shang, Mater. Des. 67, 457 (2015)CrossRef X. Li, Y. Fan, X. Ma, S.V. Subramanian, C. Shang, Mater. Des. 67, 457 (2015)CrossRef
15.
Zurück zum Zitat Y. You, C. Shang, L. Chen, S. Subramanian, Mater. Des. 43, 485 (2013)CrossRef Y. You, C. Shang, L. Chen, S. Subramanian, Mater. Des. 43, 485 (2013)CrossRef
16.
Zurück zum Zitat V.G. Haugen, B.R.S. Rogne, O.M. Akselsen, C. Thaulow, Mater. Des. 59, 135 (2014)CrossRef V.G. Haugen, B.R.S. Rogne, O.M. Akselsen, C. Thaulow, Mater. Des. 59, 135 (2014)CrossRef
18.
Zurück zum Zitat X.J. Di, X. An, F.J. Cheng, D.P. Wang, X.J. Guo, Sci. Technol. Weld. Join. 21, 366 (2016)CrossRef X.J. Di, X. An, F.J. Cheng, D.P. Wang, X.J. Guo, Sci. Technol. Weld. Join. 21, 366 (2016)CrossRef
19.
Zurück zum Zitat AWS Welding Handbook, Welding process part 1. (American Welding Society, Miami, 1997), pp. 1–680 AWS Welding Handbook, Welding process part 1. (American Welding Society, Miami, 1997), pp. 1–680
20.
Zurück zum Zitat O.M. Akselsen, J.K. Solberg, O. Grong, Scand. J. Metall. 17, 194 (1988) O.M. Akselsen, J.K. Solberg, O. Grong, Scand. J. Metall. 17, 194 (1988)
22.
Zurück zum Zitat I. Hwang, H. Yun, D. Kim, M. Kang, Y.-M. Kim, Met. Mater Int. 24, 149 (2018)CrossRef I. Hwang, H. Yun, D. Kim, M. Kang, Y.-M. Kim, Met. Mater Int. 24, 149 (2018)CrossRef
23.
Zurück zum Zitat I. Tamura, H. Sekine, T. Tanaka, C. Ouchi, Thermomechanical Processing of High-Strength Low-Alloy Steels (Butterworth-Heinemann, Oxford, 1988), pp. 80–100CrossRef I. Tamura, H. Sekine, T. Tanaka, C. Ouchi, Thermomechanical Processing of High-Strength Low-Alloy Steels (Butterworth-Heinemann, Oxford, 1988), pp. 80–100CrossRef
24.
Zurück zum Zitat S.W. Thompson, D.J. Colvin, G. Krauss, Metall. Mater. Trans. A 21A, 1493 (1990)CrossRef S.W. Thompson, D.J. Colvin, G. Krauss, Metall. Mater. Trans. A 21A, 1493 (1990)CrossRef
27.
Zurück zum Zitat C. Capdevila, F.G. Caballero, C. Garcia de Andres, ISIJ Int. 42, 894 (2003)CrossRef C. Capdevila, F.G. Caballero, C. Garcia de Andres, ISIJ Int. 42, 894 (2003)CrossRef
28.
Zurück zum Zitat K.W. Andrew, J. Iron Steel Inst. 203, 721 (1965) K.W. Andrew, J. Iron Steel Inst. 203, 721 (1965)
30.
Zurück zum Zitat H. Ohtani, S. Okaguchi, Y. Fujishiro, Y. Ohmori, Metall. Trans. A 21A, 877 (1990)CrossRef H. Ohtani, S. Okaguchi, Y. Fujishiro, Y. Ohmori, Metall. Trans. A 21A, 877 (1990)CrossRef
31.
Zurück zum Zitat M. Diaz-Fuentes, A. Iza-Mendia, I. Gutierrez, Metall. Mater. Trans. A 34A, 2505 (2003)CrossRef M. Diaz-Fuentes, A. Iza-Mendia, I. Gutierrez, Metall. Mater. Trans. A 34A, 2505 (2003)CrossRef
32.
Zurück zum Zitat Y.M. Kim, S.Y. Shin, H. Lee, B. Hwang, S. Lee, N.J. Kim, Metall. Mater. Trans. 38A, 1731 (2007)CrossRef Y.M. Kim, S.Y. Shin, H. Lee, B. Hwang, S. Lee, N.J. Kim, Metall. Mater. Trans. 38A, 1731 (2007)CrossRef
34.
Metadaten
Titel
Microstructure and Charpy Impact Properties of FCAW and SAW Heat Affected Zones of 100 mm Thick Steel Plate for Offshore Platforms
verfasst von
Dongki Choi
Hun Lee
Sung-Kyu Cho
Hyoung Chan Kim
Soong-Keun Hyun
Sang Yong Shin
Publikationsdatum
13.02.2020
Verlag
The Korean Institute of Metals and Materials
Erschienen in
Metals and Materials International / Ausgabe 6/2020
Print ISSN: 1598-9623
Elektronische ISSN: 2005-4149
DOI
https://doi.org/10.1007/s12540-020-00626-8

Weitere Artikel der Ausgabe 6/2020

Metals and Materials International 6/2020 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.