nach oben

Journal of Materials Engineering and Performance

Erschienen in:

24.04.2019

Microstructure and Mechanical Behavior of MnO₂/Pb Nanocomposite

verfasst von: Maryam Karbasi, Eskandar Keshavarz Alamdari, Elahe Amirkhani Dehkordi, Fariborz Tavangarian

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 5/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

MnO₂/Pb nanocomposite was produced by solid-state accumulative roll-bonding (ARB) technique. Composites with different amounts of MnO₂ were synthesized with the highest probable ARB cycles. The mechanical properties of composites were studied by tensile, microhardness and shear punch tests. It was observed that yield stress, tensile stress and elongation were improved by increasing the ARB cycles. On the other hand, increasing the amount of MnO₂ up to 0.5 wt.% improved the mechanical properties of the composites. Tensile tests results revealed that the maximum tensile strength could be achieved in the composite containing 0.5 wt.% MnO₂ after 10 passes (up to 4.35 times higher than control sample, Pb-10 pass). In comparison with Pb-10 pass, the hardness of 0.5 wt.% MnO₂/Pb nanocomposite was enhanced up to 7.5 times after 10 ARB passes. ARB process led to a proper distribution of MnO₂ particles in Pb matrix with the mean size of less than 30 nm.

Vorheriger Artikel Microstructure and Mechanical Properties of Extruded Mg-7Sn-5Zn-xAl (x = 0, 1, 2 and 3 wt.%) Alloy

Nächster Artikel Effect of Through-Thickness Friction Stir Processing Parameters on Weld Repair and Modification of Fusion-Welded AA6061 Aluminum Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Z.S. Msindo, V. Sibanda, and J.H. Potgieter, Electrochemical and Physical Characterisation of Lead-Based Anodes in Comparison to Ti-(70%) IrO₂/(30%) Ta₂O₅ Dimensionally Stable Anodes for use in Copper Electrowinning, J. Appl. Electrochem., 2010, 40(3), p 691–699CrossRef

Y.-C. Zhang, B.-M. Chen, H.-T. Yang, H. Huang, and Z.-C. Guo, Anodic Behavior and Microstructure of Al/Pb-Ag-Co Anode During Zinc Electrowinning, J. Cent South Univ., 2014, 21(1), p 83–88CrossRef

J. Yang, B.-M. Chen, H. Hang, Z.-C. Guo, and S. Wang, Effect of Rolling Technologies on the Properties of Pb-0.06 wt%Ca-1.2 wt%Sn Alloy Anodes During Copper Electrowinning, Int. J. Min. Metall. Mater., 2015, 22(11), p 1205–1211CrossRef

R.A. Shakarji, Y. He, and S. Gregory, Statistical Analysis of the Effect of Operating Parameters on Acid Mist Generation in Copper Electrowinning, Hydrometallurgy, 2011, 106(1), p 113–118CrossRef

Y. Zhang, B. Chen, and Z. Guo, Electrochemical Properties and Microstructure of Al/Pb-Ag and Al/Pb-Ag-Co Anodes for Zinc Electrowinning, Acta Metall. Sin. (Engl. Lett.), 2014, 27(2), p 331–337CrossRef

W. Zhang and G. Houlachi, Electrochemical Studies of the Performance of Different Pb-Ag Anodes During and After Zinc Electrowinning, Hydrometallurgy, 2010, 104(2), p 129–135CrossRef

Y.Q. Lai, Y. Li, L.X. Jiang, X.J. Lv, J. Li, and Y.X. Liu, Electrochemical Performance of a Pb/Pb-MnO₂ Composite Anode in Sulfuric Acid Solution Containing Mn²⁺, Hydrometallurgy, 2012, 115-116(Supplement C), p 64–70CrossRef

X.-C. Zhong, L.-X. Jiang, F.-Y. Liu, J. Li, and Y.-X. Liu, Anodic Passivation of Pb-Ag-Nd Anode in Fluoride-Containing H₂SO₄ Solution, J. Cent. South Univ., 2015, 22(8), p 2894–2901CrossRef

C.-G. Kuo, H. Chang, L.-R. Hwang, S. Hor, J.-S. Chen, G.-Y. Liu, and S.-C. Cheng, Fabrication of a Pb-Sn Nanowire Array Gas Sensor Using a Novel High Vacuum Die Casting Technique, Electron. Mater. Lett., 2013, 9(4), p 481–484CrossRef

10.

Y. Li, L.X. Jiang, X.J. Lv, Y.Q. Lai, H.L. Zhang, J. Li, and Y.X. Liu, Oxygen Evolution and Corrosion Behaviors of Co-Deposited Pb/Pb-MnO₂ Composite Anode for Electrowinning of Nonferrous Metals, Hydrometallurgy, 2011, 109(3), p 252–257CrossRef

11.

X.-C. Zhong, X.-Y. Yu, Z.-W. Liu, L.-X. Jiang, J. Li, and Y.-X. Liu, Comparison of Corrosion and Oxygen Evolution Behaviors Between Cast and Rolled Pb-Ag-Nd Anodes, Int. J. Min. Metall. Mater., 2015, 22(10), p 1067–1075CrossRef

12.

Y. Sun, W. Zhang, D. Li, L. Gao, C. Hou, Y. Zhang, and Y. Liu, Direct Formation of Porous MnO₂/Ni Composite Foam Applied for High-Performance Supercapacitors at Mild Conditions, Electrochim. Acta, 2015, 178(Supplement C), p 823–828CrossRef

13.

P.R. Jadhav, M.P. Suryawanshi, D.S. Dalavi, D.S. Patil, E.A. Jo, S.S. Kolekar, A.A. Wali, M.M. Karanjkar, J.-H. Kim, and P.S. Patil, Design and Electro-Synthesis of 3-D Nanofibers of MnO₂ Thin Films and Their Application in High Performance Supercapacitor, Electrochim. Acta, 2015, 176(Supplement C), p 523–532CrossRef

14.

H. Liu, R. Nie, Y. Yue, Q. Zhang, Q. Chen, J. Zhu, P. Yu, D. Xiao, C. Wang, and X. Wang, Effect of MnO₂ Doping on Piezoelectric, Dielectric and Ferroelectric Properties of PNN-PZT Ceramics, Ceram. Int., 2015, 41(9, Part A), p 11359–11364CrossRef

15.

Y.-L. Kuo, C.-C. Wu, W.-S. Chang, C.-R. Yang, and H.-L. Chou, Study of Poly (3,4-ethylenedioxythiophene)/MnO₂ as Composite Cathode Materials for Aluminum-Air Battery, Electrochim. Acta, 2015, 176(Supplement C), p 1324–1331CrossRef

16.

S. Zhu, L. Li, J. Liu, H. Wang, T. Wang, Y. Zhang, L. Zhang, R.S. Ruoff, and F. Dong, Structural Directed Growth of Ultrathin Parallel Birnessite on β-MnO₂ for High-Performance Asymmetric Supercapacitors, ACS Nano, 2018, 12(2), p 1033–1042CrossRef

17.

Q.J. Le, T. Wang, D.N.H. Tran, F. Dong, Y.X. Zhang, and D. Losic, Morphology-Controlled MnO₂ Modified Silicon Diatoms for High-Performance Asymmetric Supercapacitors, J. Mater. Chem. A, 2017, 5(22), p 10856–10865CrossRef

18.

T. Zhu, Z. He, G. Zhang, Y. Lu, C. Lin, Y. Chen, and H. Guo, Effect of Low Magnetic Fields on the Morphology and Electrochemical Properties of MnO₂ Films on Nickel Foams, J. Alloy. Compd., 2015, 644(Supplement C), p 186–192CrossRef

19.

F. Daneshvar, M. Reihanian, and K. Gheisari, Al-Based Magnetic Composites Produced by Accumulative Roll Bonding (ARB), Mater. Sci. Eng. B, 2016, 206(Supplement C), p 45–54CrossRef

20.

M. Reihanian, F.K. Hadadian, and M.H. Paydar, Fabrication of Al-2vol% Al₂O₃/SiC Hybrid Composite Via Accumulative Roll Bonding (ARB): An Investigation of the Microstructure and Mechanical Properties, Mater. Sci. Eng. A, 2014, 607(Supplement C), p 188–196CrossRef

21.

N.E. Mahallawy, A. Fathy, W. Abdelaziem, and M. Hassan, Microstructure Evolution and Mechanical Properties of Al/Al-12%Si Multilayer Processed by Accumulative Roll Bonding (ARB), Mater. Sci. Eng. A, 2015, 647(Supplement C), p 127–135CrossRef

22.

M. Danaie, C. Mauer, D. Mitlin, and J. Huot, Hydrogen Storage in Bulk Mg-Ti and Mg-Stainless Steel Multilayer Composites Synthesized Via Accumulative Roll-Bonding (ARB), Int. J. Hydrogen Energy, 2011, 36(4), p 3022–3036CrossRef

23.

R. Jamaati, M.R. Toroghinejad, M.A. Mohtadi-Bonab, H. Edris, J.A. Szpunar, and M.R. Salmani, Comparison of Microparticles and Nanoparticles Effects on Deformation Texture of Steel-Based Composite and Nanocomposite Fabricated by the ARB Process, Mater. Sci. Eng. A, 2014, 607(Supplement C), p 173–187CrossRef

24.

R. Jamaati, M.R. Toroghinejad, and H. Edris, Fabrication of Nanoparticle Strengthened IF Steel Via ARB Process, Mater. Sci. Eng. A, 2013, 583(Supplement C), p 20–24CrossRef

25.

R. Monzen, Y. Takagawa, C. Watanabe, D. Terada, and N. Tsuji, Mechanical Properties of Precipitation Strengthening Cu-Base Alloys Highly Deformed by ARB Process, Procedia Eng., 2011, 10(Supplement C), p 2417–2422CrossRef

26.

M. Karbasi and E.K. Alamdari, Investigation of Lead Base Composite Anodes Produced by Accumulative Roll Bonding, Mater. Des., 2015, 67(Supplement C), p 118–129CrossRef

27.

M. Karbasi and E.K. Alamdari, Electrochemical Evaluation of Lead Base Composite Anodes Fabricated by Accumulative Roll Bonding Technique, Metall. Mater. Trans. B, 2015, 46(2), p 688–699CrossRef

Titel: Microstructure and Mechanical Behavior of MnO2/Pb Nanocomposite
verfasst von: Maryam Karbasi
Eskandar Keshavarz Alamdari
Elahe Amirkhani Dehkordi
Fariborz Tavangarian
Publikationsdatum: 24.04.2019
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 5/2019
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-019-04052-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2019

Interfacial Modification Using Matrix Alloying in Mg/CNT Composites for Improved Mechanical Performance

Effect of ECAP Die Angles on Microstructure Mechanical Properties and Corrosion Behavior of AZ80 Mg Alloy

Effects of Laser Fluence on Microstructure and Bonding Characteristics of Wideband Laser-Deposited Nickel Composite Coatings

Investigation on Equal-Channel Angular Pressing-Induced Grain Refinement in an Aluminum Matrix Composite Reinforced with Al-Cu-Ti Metallic Glass Particles

Effects of Temperature and Heat Input on the Wear Mechanisms of Contact Tube for Non-copper-Coated Solid Wires

Experimental Study on the Porosity of Electron Beam Melting-Manufactured Ti6Al4V

Premium Partner

Marktübersichten