Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

2020 | OriginalPaper | Buchkapitel

Microstructure and Mechanical Characterization of AA7150/ZrO2 Composites Manufactured by Stir Casting Route

verfasst von: V. Mohanavel, M. Ravichandran, S. Suresh Kumar, A. Praveen Kumar

Erschienen in: Advances in Lightweight Materials and Structures

Verlag: Springer Singapore

share
TEILEN

Abstract

In this manuscript, it exhibits the fabrication of AA7150 aluminium alloy composites (AMC) which have been produced via stir casting route utilizing zirconium oxide (ZrO2) as secondary content. The influence of secondary phase on the tensile strength and hardness of the composites was evaluated. The produced AMC and primary alloy were portrayed via scanning electron microscope (SEM). The examination outcomes reveal that the mechanical performance of the manufactured composites is enhanced via rising of the ZrO2 content. SEM pictures expose the homogeneous spreading of ZrO2 particles throughout the Al alloy.

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literatur
1.
Zurück zum Zitat Sajjadi SA, Ezatpour HR, Parizi MT (2012) Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al 2O 3 composites fabricated by stir casting and compo-casting processes. Mater Des 34:106–111 CrossRef Sajjadi SA, Ezatpour HR, Parizi MT (2012) Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al 2O 3 composites fabricated by stir casting and compo-casting processes. Mater Des 34:106–111 CrossRef
2.
Zurück zum Zitat Mohanavel V, Rajan K, Suresh Kumar S, Vijayan G, Vijayanand MS (2018) Study on mechanical properties of graphite particulates reinforced aluminium matrix composite fabricated by stir casting technique. Mater Today Proc 5(1):2945–2950 CrossRef Mohanavel V, Rajan K, Suresh Kumar S, Vijayan G, Vijayanand MS (2018) Study on mechanical properties of graphite particulates reinforced aluminium matrix composite fabricated by stir casting technique. Mater Today Proc 5(1):2945–2950 CrossRef
3.
Zurück zum Zitat Nas E, Gokkaya H (2016) Mechanical and physical properties of hybrid reinforced (Al/B4C/Ni(K)Gr) composite materials produced by hot pressing. Mater Test 57(6):524–530 CrossRef Nas E, Gokkaya H (2016) Mechanical and physical properties of hybrid reinforced (Al/B4C/Ni(K)Gr) composite materials produced by hot pressing. Mater Test 57(6):524–530 CrossRef
4.
Zurück zum Zitat Ravichandran M, Dineshkumar S (2016) Experimental investigations on Al-TiO 2-Gr hybrid composites fabricated through stir casting route. Mater Test 58(3):211–217 CrossRef Ravichandran M, Dineshkumar S (2016) Experimental investigations on Al-TiO 2-Gr hybrid composites fabricated through stir casting route. Mater Test 58(3):211–217 CrossRef
5.
Zurück zum Zitat Ravichandran M, Sait AN, Anandakrishnan V (2014) Synthesis and forming behavior of aluminium-based hybrid powder metallurgic composites. Int J Miner Metall Mater 21(2):181–189 Ravichandran M, Sait AN, Anandakrishnan V (2014) Synthesis and forming behavior of aluminium-based hybrid powder metallurgic composites. Int J Miner Metall Mater 21(2):181–189
6.
Zurück zum Zitat Mohanavel V, Naveen Kumar M, Magesh Kumar K, Jayasekar C, Dineshbabu N, Udishkumar S (2017) Mechanical behavior of in situ ZrB 2/AA2014 composite produced by the exothermic salt-metal reaction technique. Mater Today Proc 4 (2PA):3215–3221 Mohanavel V, Naveen Kumar M, Magesh Kumar K, Jayasekar C, Dineshbabu N, Udishkumar S (2017) Mechanical behavior of in situ ZrB 2/AA2014 composite produced by the exothermic salt-metal reaction technique. Mater Today Proc 4 (2PA):3215–3221
7.
Zurück zum Zitat Sajjadi SA, Ezatpour HR, Beygi H (2011) Microstructure and mechanical properties of Al-Al 2O 3 micro and nano composites fabricated by stir casting. Mater Sci Eng A 528:8765–8771 Sajjadi SA, Ezatpour HR, Beygi H (2011) Microstructure and mechanical properties of Al-Al 2O 3 micro and nano composites fabricated by stir casting. Mater Sci Eng A 528:8765–8771
8.
Zurück zum Zitat Doruk E, Pakdil M (2016) Effect of tempering conditions on the fatigue behavior of an AA6082 aluminum alloy. Mater Test 58(6):542–546 Doruk E, Pakdil M (2016) Effect of tempering conditions on the fatigue behavior of an AA6082 aluminum alloy. Mater Test 58(6):542–546
9.
Zurück zum Zitat Mohanavel V, Rajan K, Suresh Kumar S, Chockalingam A, Roy A, Adithiyaa T (2018) Mechanical and tribological characterization of stir-cast Al-SiCp composites. Mater Today Proc 5:1740–1746 Mohanavel V, Rajan K, Suresh Kumar S, Chockalingam A, Roy A, Adithiyaa T (2018) Mechanical and tribological characterization of stir-cast Al-SiCp composites. Mater Today Proc 5:1740–1746
10.
Zurück zum Zitat Mohanavel V, Ravichandran M, Suresh Kumar S (2020) Tribological and mechanical properties of Zirconium Di-boride (ZrB 2) particles reinforced aluminium matrix composites. Mater Today Proc 21:862–864 Mohanavel V, Ravichandran M, Suresh Kumar S (2020) Tribological and mechanical properties of Zirconium Di-boride (ZrB 2) particles reinforced aluminium matrix composites. Mater Today Proc 21:862–864
11.
Zurück zum Zitat Stalin B, Ravichandran M, Mohanavel V, Raj LP (2020) Investigations into microstructure and mechanical properties of Mg-5wt.%Cu-TiB 2 composites produced via powder metallurgy route. J Min Metall Sect B Metall 56(1):99–108 Stalin B, Ravichandran M, Mohanavel V, Raj LP (2020) Investigations into microstructure and mechanical properties of Mg-5wt.%Cu-TiB 2 composites produced via powder metallurgy route. J Min Metall Sect B Metall 56(1):99–108
12.
Zurück zum Zitat Mohanavel V, Rajan K, Ravichandran M (2016) Synthesis, characterization and properties of stir cast AA6351-aluminium nitride (AlN) composites. J Mater Res 31(2):3824–3831 Mohanavel V, Rajan K, Ravichandran M (2016) Synthesis, characterization and properties of stir cast AA6351-aluminium nitride (AlN) composites. J Mater Res 31(2):3824–3831
13.
Zurück zum Zitat Shankar S, Balaji A, Kawin N (2018) Investigations on mechanical and tribological properties of Al-Si10-Mg alloy/sugarcane bagasse ash particulate composites. Particul Sci Technol 36(6):762–770 Shankar S, Balaji A, Kawin N (2018) Investigations on mechanical and tribological properties of Al-Si10-Mg alloy/sugarcane bagasse ash particulate composites. Particul Sci Technol 36(6):762–770
14.
Zurück zum Zitat Kumar A, Kumar S, Mukhopadhyay NK (2018) Introduction to magnesium alloy processing technology and development of low-cost stir casting process for magnesium alloy and its composites. J Mag Alloys 6:245–254 Kumar A, Kumar S, Mukhopadhyay NK (2018) Introduction to magnesium alloy processing technology and development of low-cost stir casting process for magnesium alloy and its composites. J Mag Alloys 6:245–254
15.
Zurück zum Zitat Mohanavel V, Ravichandran M (2019a) Influence of AlN particles on microstructure, mechanical and tribological behavior in AA6351 aluminum alloy. Mater Res Exp 6(10):106557 Mohanavel V, Ravichandran M (2019a) Influence of AlN particles on microstructure, mechanical and tribological behavior in AA6351 aluminum alloy. Mater Res Exp 6(10):106557
16.
Zurück zum Zitat Gao Q, Wu S, Lu S, Duan X, An P (2016) Preparation of in-situ 5 vol% TiB 2 particulate reinforced Al-4.5Cu alloy matrix composites assisted by improved mechanical stirring process. Mater Des 94:79–86 Gao Q, Wu S, Lu S, Duan X, An P (2016) Preparation of in-situ 5 vol% TiB 2 particulate reinforced Al-4.5Cu alloy matrix composites assisted by improved mechanical stirring process. Mater Des 94:79–86
17.
Zurück zum Zitat Praveen Kumar A, Dhilepan GE (2016) Influence of nano reinforced particles on the mechanical properties of aluminium hybrid metal matrix composite fabricated by ultrasonic assisted stir casting. ARPN J Eng Appl Sci 11(2):1204–1210 Praveen Kumar A, Dhilepan GE (2016) Influence of nano reinforced particles on the mechanical properties of aluminium hybrid metal matrix composite fabricated by ultrasonic assisted stir casting. ARPN J Eng Appl Sci 11(2):1204–1210
18.
Zurück zum Zitat Jasper J, Praveen Kumar A, Bharanidaran R (2015) Synthesis, characterization and evaluation of properties of aluminium alloy based hybrid composite reinforced with nano SiC and nano grapheme. Int J Appl Eng Res 10(50):735–739 Jasper J, Praveen Kumar A, Bharanidaran R (2015) Synthesis, characterization and evaluation of properties of aluminium alloy based hybrid composite reinforced with nano SiC and nano grapheme. Int J Appl Eng Res 10(50):735–739
19.
Zurück zum Zitat Suganuma K, Fujita T, Niihara K, Okamoto T, Koizumi M, Suzuki N (1989) Hot extrusion of AA7178 reinforced with alumina short fibre. Mater Sci Technol 5:249–254 Suganuma K, Fujita T, Niihara K, Okamoto T, Koizumi M, Suzuki N (1989) Hot extrusion of AA7178 reinforced with alumina short fibre. Mater Sci Technol 5:249–254
20.
Zurück zum Zitat Mohanavel V, Ravichandran M (2019b) Experimental investigation on mechanical properties of AA7075-AlN composites. Mater Test 61(6):554–558 Mohanavel V, Ravichandran M (2019b) Experimental investigation on mechanical properties of AA7075-AlN composites. Mater Test 61(6):554–558
21.
Zurück zum Zitat Nallusamy M, Sundaram S, Kalaiselvan K (2019) Fabrication, characterization and analysis of improvements in mechanical properties of AA7075/ZrB 2 in-situ composites. Measurement 136:356–366 Nallusamy M, Sundaram S, Kalaiselvan K (2019) Fabrication, characterization and analysis of improvements in mechanical properties of AA7075/ZrB 2 in-situ composites. Measurement 136:356–366
22.
Zurück zum Zitat Madhukar P, Selvaraj N, Punugupati G, Veeresh Kumar GB, Rao CSP, Mishra SK (2019) Microstructure studies of AA7150-HBN nano composites fabricated by ultrasonic assisted stir casting, Mater Res Exp 6:116545 Madhukar P, Selvaraj N, Punugupati G, Veeresh Kumar GB, Rao CSP, Mishra SK (2019) Microstructure studies of AA7150-HBN nano composites fabricated by ultrasonic assisted stir casting, Mater Res Exp 6:116545
23.
Zurück zum Zitat Mohanavel V, Suresh Kumar S, Sathish T, Adithiyaa T, Mariyappan K (2018) Microstructure and mechanical properties of hard ceramic particulate reinforced AA7075 alloy composites via liquid metallurgy route. Mater Today Proc 5:26860–26865 Mohanavel V, Suresh Kumar S, Sathish T, Adithiyaa T, Mariyappan K (2018) Microstructure and mechanical properties of hard ceramic particulate reinforced AA7075 alloy composites via liquid metallurgy route. Mater Today Proc 5:26860–26865
24.
Zurück zum Zitat Rajan HBM, Ramabalan S, Dinaharan I, Vijay SJ (2013) Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites. Mater Des 44:438–445 Rajan HBM, Ramabalan S, Dinaharan I, Vijay SJ (2013) Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites. Mater Des 44:438–445
Metadaten
Titel
Microstructure and Mechanical Characterization of AA7150/ZrO2 Composites Manufactured by Stir Casting Route
verfasst von
V. Mohanavel
M. Ravichandran
S. Suresh Kumar
A. Praveen Kumar
Copyright-Jahr
2020
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-15-7827-4_34

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.