Skip to main content

2018 | OriginalPaper | Buchkapitel

Microstructure Development in Track-by-Track Melting of EBM-Manufactured Alloy 718

verfasst von : Paria Karimi, Dunyong Deng, Esmaeil Sadeghimeresht, Jonas Olsson, Joakim Ålgårdh, Joel Andersson

Erschienen in: Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications

Verlag: Springer International Publishing

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Electron beam melting (EBM) is a powder-bed fusion process within the group of additive manufacturing (AM) technology that is used to fabricate high performance metallic parts. Nickel-Iron base superalloys, such as Alloy 718, are subjected to successive heating and cooling at temperatures in excess of 800 °C during the EBM process. Characterization of the dendritic structure, carbides, Laves and δ-phase were of particular interest in this study. These successive thermal cycles influence the microstructure of the material resulting in a heterogeneous structure, especially in the building direction. Hence, the aim of this study was to gain increased fundamental understanding of the relationship between the processing history and the microstructure formed within a single layer. Different numbers of tracks with equal heights were for this purpose produced, varying from one to ten tracks. All tracks used the same process parameters regardless of number and/or position. Microstructure characteristics (sub-grain structure, grain structure and phases) were analyzed by optical microscopy, scanning electron microscopy equipped with energy disperse spectroscopy and electron backscatter diffraction. The direction of dendrites changed in the overlap zones within the tracks due to re-melting of material in the overlap zone. The primary dendrite arm spacings slightly increased along multi-tracks owing to a slight decrease in cooling rate by addition of the next tracks. Epitaxial growth of grains were observed in all samples due to partial re-melting of grains in previous layers and surface nucleation was also found to occur in all tracks.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Dilip JJS, Anam MA, Pal D, Stucker B (2016) A short study on the fabrication of single track deposits in SLM and characterization. In: Solid freeform fabrication symposium. Austin TX, USA Dilip JJS, Anam MA, Pal D, Stucker B (2016) A short study on the fabrication of single track deposits in SLM and characterization. In: Solid freeform fabrication symposium. Austin TX, USA
2.
Zurück zum Zitat Bandyopadhyay A, Bose S (2015) Additive manufacturing Bandyopadhyay A, Bose S (2015) Additive manufacturing
3.
Zurück zum Zitat Gibson I, Rosen D, Stucker B (2015) Additive manufacturing technologies 3D printing, rapid prototyping, and direct digital manufacturingCrossRef Gibson I, Rosen D, Stucker B (2015) Additive manufacturing technologies 3D printing, rapid prototyping, and direct digital manufacturingCrossRef
11.
Zurück zum Zitat Vrancken B (2016) Study of residual stresses in selective laser melting. Université Libre Vrancken B (2016) Study of residual stresses in selective laser melting. Université Libre
19.
Zurück zum Zitat Tien JK (2012) Superalloys, supercomposites and superceramics. Elsevier Tien JK (2012) Superalloys, supercomposites and superceramics. Elsevier
Metadaten
Titel
Microstructure Development in Track-by-Track Melting of EBM-Manufactured Alloy 718
verfasst von
Paria Karimi
Dunyong Deng
Esmaeil Sadeghimeresht
Jonas Olsson
Joakim Ålgårdh
Joel Andersson
Copyright-Jahr
2018
DOI
https://doi.org/10.1007/978-3-319-89480-5_42

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.