Ausgabe 1/2018 Special Issues on Four International Conferences: Applied System Innovation 2016, DTIP 2016, SmaSys 2016, and Wafer Bond 2015
Inhalt (93 Artikel)
Special Issue: International Conference on Applied System Innovation (ICASI 2016)
- Editorial
Sheng-Joue Young, Teen-Hang Meen, Ajit Khosla, B. Michel
Identity authentication by sensed acoustic voices from a speaking person using an efficient GMM-SVM dual modeling framework
- Technical Paper
Ing-Jr Ding, Zih-Jheng Lin
Design of fast logarithmic converters with high accuracy for digital camera application
- Technical Paper
Chao-Tsung Kuo, Tso-Bing Juang
Maximum torque per ampere control of IPMSM drive by fuzzy logic
- Technical Paper
Ming-Shyan Wang, Min-Fu Hsieh, Ying-Shieh Kung, Guan Ting Lin
A novel printhead multiplexer data registration chip system with injection cavity design
- Technical Paper
Jian-Chiun Liou, Te-Jen Su, Wen-Chieh Lin, Wei-Jie Wen
Speed control of brushless DC motor by adaptive network-based fuzzy inference
- Technical Paper
Ming-Shyan Wang, Seng-Chi Chen, Cih-Huei Shih
Particle swarm optimization application on a micro grid for energy savings
- Technical Paper
Tsun-Jen Cheng, Cheng-Ting Hsu, R. Korimara, Yih-Der Lee, Yung-Ruei Chang
Random dispersion effects of conductive particles on anisotropic conductive film’s (ACF’s) bonding yield
- Technical Paper
Chao-Ming Lin, Mao-Chieh Chi, Yen-Chun Liu
Ethanol gas sensors based on multi-wall carbon nanotubes on oxidized Si substrate
- Technical Paper
S. J. Young, Z. D. Lin
Error-tolerability enhancement via bit inversion and median filtering for single-bit errors in image processing circuits
- Technical Paper
Tong-Yu Hsieh, Yi-Han Peng, Kuan-Chih Cheng, Tai-Ang Cheng
Wide-range CMOS reference clock generator with a dynamic duty cycle scaling mechanism at a 0.9-V supply voltage
- Technical Paper
Wei-Bin Yang, Yu-Lung Lo, Kuo-Ning Chang, Yu-Yao Lin
FPGA-realization of a sensorless speed controller for PMSM drives using novel sliding mode observer
- Technical Paper
Ying-Shieh Kung, Risfendra Risfendra, Yi-De Lin, Liang-Chiao Huang
A digital crystal-less clock generator using a phase error corrector
- Technical Paper
Jen-Chieh Liu, Pei-Ying Lee, Cheng-Hsing Hsu, Ching-Fang Tseng, Chao-Jen Huang, Yo-Hao Tu
Synthesis and optoelectronic properties of Ga-doped ZnO nanorods by hydrothermal method
- Technical Paper
Sheng-Joue Young, Chia-Lin Chiou
A current-controlled oscillator with temperature, voltage, and process compensation
- Technical Paper
Wei-Bin Yang, Jen-Shiun Chiang, Ching-Tsan Cheng, Chi-Hsiung Wang, Horng-Yuan Shih, Jia-Liang Syu, Cing-Huan Chen, Yu-Lung Lo
On the asymptotic behaviors of time homogeneous Markov chains in two-inertia systems
- Technical Paper
Feng-Rung Hu, Jia-Sheng Hu
A study of fuzzy control with ant colony algorithm used in mobile robot for shortest path planning and obstacle avoidance
- Technical Paper
Chih-Ta Yen, Ming-Feng Cheng
A fast-lock and low-power DLL-based clock generator applied for DDR4
- Technical Paper
Yu-Lung Lo, Wei-Bin Yang, Han-Hsien Wang, Cing-Huan Chen, Zi-Ang Huang
Mean arterial pressure control system using model predictive control and particle swarm optimization
- Technical Paper
Te-Jen Su, Shih-Ming Wang, Hong-Quan Vu, Jau-Ji Jou, Cheuk-Kwan Sun
A multiple bio-signal measurement analysis and warning system for the long-term health care of severe disabled
- Technical Paper
Chung-Min Wu, Shih-Chung Chen, Yeou-Jiunn Chen
Combination of micro and cloud-based system to ambulance
- Technical Paper
Chi-Chieh Chen, Pei-Jarn Chen, Bao-Tein Chen, Chung-Min Hsu
Analytical subthreshold current modeling of nanoscale ultra-thin body ultra-thin box SOI MOSFETs with a vertical gaussian doping profile
- Technical Paper
Sufen Wei, Guohe Zhang, Huixiang Huang, Jing Liu, Zhibiao Shao, Li Geng, Cheng-Fu Yang
Applying fuzzy decision for a single channel SSVEP-based BCI on automatic feeding robot
- Technical Paper
Shih-Chung Chen, Chung-Min Wu, Ilham A. E. Zaeni, Yeou-Jiunn Chen
Bot detection using unsupervised machine learning
- Technical Paper
Wei Wu, Jaime Alvarez, Chengcheng Liu, Hung-Min Sun
Area-efficient and highly accurate antilogarithmic converters with multiple regions of constant compensation schemes
- Technical Paper
Chao-Tsung Kuo, Tso-Bing Juang
Design and simulate the properties of triangular periodic nanoparticle arrays with the structure of bi-layer hexagonal lattice
- Technical Paper
Jing Liu, Zhifeng Zheng, Chaoyang Chen, Guangsong Yang, Cheng-Fu Yang
The performance analysis of photovoltaic generation using the improved incremental conductance method under varying solar irradiance
- Technical Paper
Jeeng-Min Ling, Ping-Hsun Liu
FPGA-realization of a self-tuning PID controller for X–Y table with RBF neural network identification
- Technical Paper
Ying-Shieh Kung, Hoang Than, Tzu-Yao Chuang
Investigating the design parameters on spiral micro-channel by using Fibonacci sequence and Taguchi method
- Technical Paper
Cheng-Hsing Hsu, Jui-Chin Jiang, Hung-Son Dang, Thi-Anh-Tuyet Nguyen, Ching-Chuan Chang
A hybrid session key exchange algorithm for highly-sensitive IP-based institutional communications
- Technical Paper
Zheng-Yun Zhuang, Yi-Chang Hsu, Kimmo Nurmi, Chih-Yung Chen, Hsing-Hua Liu, Tzu-Shan Tseng
Application of ZnO micro rods on the composite photo-electrode of dye sensitized solar cells
- Technical Paper
Tung-Lung Wu, Teen-Hang Meen, Shi-Mian Chao, Liang-Wen Ji, Li-Chi Shih, Chiung-Hsien Huang, Jenn-Kai Tsai, Tien-Chuan Wu
Intelligent molecular orientation transformation in 3D printing system
- Technical Paper
Ying-Tsang Lo, Chin-Jui Liu, Shyh-Kuang Ueng, Tun-Wen Pai
0.35 μm CMOS–MEMS low-mechanical-noise micro accelerometer
- Technical Paper
Ja-Hao Chen, Chih-Wei Huang
Eye to hand calibration using ANFIS for stereo vision-based object manipulation system
- Technical Paper
Taryudi, Ming-Shyan Wang
System satisfaction survey for the App to integrate search and augmented reality with geographical information technology
- Technical Paper
Chen-Chiou Chiu, Lai-Chung Lee
Investigation of the composites of epoxy and micro-scale BaTi4O9 ceramic powder as the substrate of microwave communication circuit
- Technical Paper
Guociang Peng, Chia-Ching Wu, Chien-Chen Diao, Cheng-Fu Yang
Effects of anodization parameters on the corrosion resistance of 6061 Al alloy using the Taguchi method
- Technical Paper
I. C. Chung, C. K. Chung, Y. K. Su
Special issue on Design, Test, Integration and Packaging of MEMS and MOEMS, 2016
- Editorial
Pascal Nouet, Bernd Michel
Micro-cantilevers for optical sensing of biogenic amines
- Technical Paper
Ying Wang, Carlos André Bravo Costa, Elzbieta Karolina Sobolewska, Jacek Fiutowski, Robert Brehm, Jörg Albers, Eric Nebling, Fabian Lofink, Bernhard Wagner, Wolfgang Benecke, Horst-Günter Rubahn, Roana de Oliveira Hansen
Gallium nitride MEMS resonators: how residual stress impacts design and performances
- Technical Paper
Christophe Morelle, Didier Théron, Joff Derluyn, Stefan Degroote, Marianne Germain, Victor Zhang, Lionel Buchaillot, Bertrand Grimbert, Pascal Tilmant, François Vaurette, Isabelle Roch-Jeune, Virginie Brandli, Vanessa Avramovic, Etienne Okada, Marc Faucher
Measurement and characterisation of displacement and temperature of polymer based electrothermal microgrippers
- Technical Paper
Muaiyd H. M. Al-Zandi, Changhai Wang, Rodica Voicu, Raluca Muller
Antireflective polymer films via roll to roll UV nanoimprint lithography using an AAO mold
- Technical Paper
Cheng-Hsin Chuang, Deng-Maw Lu, Po-Hsiang Wang, Wen-Yu Lee, Muhammad Omar Shaikh
Thermo-mechanical analysis of laser peeling of ultrathin glass for removing edge flaws in web processing applications
- Technical Paper
Kuo-Shen Chen, Tian-Shiang Yang, Ron-Can Hong, Tz-Cheng Chiu, Mao-Chi Lin
Development of a 2D array of micromachined electromagnetic digital actuators for micro-conveyance applications
- Technical Paper
Zhichao Shi, Benoît Bélier, Emile Martincic, Laurent Petit, Johan Moulin, Elie Lefeuvre, Jérémy Terrien, Christine Prelle, Frédéric Lamarque
Compact modeling approach for microchannel cooling and its validation
- Technical Paper
Márton Németh, Gábor Takács, Lázár Jani, András Poppe
Thermal modelling of integrated microscale heatsink structures
- Technical Paper
Gy. Bognár, G. Takács, L. Pohl, P. G. Szabó
Theoretical and finite element analysis of dynamic deformation in resonating micromirrors
- Technical Paper
Russell Farrugia, Ivan Grech, Duncan Camilleri, Owen Casha, Edward Gatt, Joseph Micallef
Solid-state pH sensor prototype for real-time monitoring of the rumen pH value of Japanese cows
- Technical Paper
Lan Zhang, Jian Lu, Hirofumi Nogami, Hironao Okada, Toshihiro Itoh, Shozo Arai
Design optimization for an SOI MOEMS accelerometer
- Technical Paper
Adrian J. T. Teo, Holden King-Ho Li, Say Hwa Tan, Yong-Jin Yoon
Design, simulation and analysis of a digital RF MEMS varactor using thick SU-8 polymer
- Open Access
- Technical Paper
Noor Amalina Ramli, Tughrul Arslan, Nakul Haridas, Wei Zhou
Pin-count reduction for continuous flow microfluidic biochips
- Technical Paper
Alexander Schneider, Paul Pop, Jan Madsen
Solar cell efficiency improvement employing down-shifting silicon quantum dots
- Technical Paper
Rosendo Lopez-Delgado, H. J. Higuera-Valenzuela, A. Zazueta-Raynaud, A. Ramos-Carrazco, J. E. Pelayo, D. Berman-Mendoza, M. E. Álvarez-Ramos, Arturo Ayon
Integrated 0–30 V switching driver circuit fabricated by mesa isolation postprocess of standard 5 V CMOS LSI for MEMS actuator applications
- Technical Paper
Yuki Okamoto, Yoshio Mita
Fabrication and test of RF MEMS in LTCC technology
- Technical Paper
Andrea Lucibello, Romolo Marcelli, Ernesto Di Paola, Sergio Di Nardo, Daniele Pochesci, Renato Croci, Chiara Germani
3D force sensors for laparoscopic surgery tool
- Technical Paper
János Radó, Csaba Dücső, Péter Földesy, Gábor Szebényi, Zbigniew Nawrat, Kamil Rohr, Péter Fürjes
Performance of I-shaped piezoelectric-excited millimeter-sized cantilever in sensing applications: modeling, simulation and experiment
- Technical Paper
Mehrdad Aghamohammadi, Mahnaz Shamshirsaz, Amir Hossein Rezaie
Influence of deposition temperature during LPCVD on surface properties of ultrathin polysilicon films
- Technical Paper
Marcin Michałowski, Rodica Voicu, Cosmin Obreja, Angela Baracu, Raluca Muller, Zygmunt Rymuza
Effect of Au nanoparticles on the performance of hybrid solar cells
- Technical Paper
Manisha Sharma, Rosendo Lopez-Delgado, Arturo A. Ayon
A novel design of a low-voltage low-loss T-match RF-MEMS capacitive switch
- Technical Paper
Li-Ya Ma, Anis Nurashikin Nordin, Norhayati Soin
Wafer-level micropackaging in thin film technology for RF MEMS applications
- Technical Paper
A. Persano, P. Siciliano, F. Quaranta, A. Taurino, A. Lucibello, Romolo Marcelli, G. Capoccia, E. Proietti, A. Bagolini, J. Iannacci
Design and analysis of a boosted pierce oscillator using MEMS SAW resonators
- Technical Paper
Mohd Haidar Hamzah, Jamilah Karim, Aliza Aini Md Ralib, Anis Nurashikin Nordin
Special issue on 4th International Conference on Smart Systems Engineering (SmaSys 2016)
- Editorial
Ajit Khosla, Hidemitsu Furukawa, Bernd Michel
Investigation of polycyanurate/benzoxazine curing system
- Technical Paper
Mao-Chun Fu, Takaaki Uno, Mitsuru Ueda, Tomoya Higashihara
Alignment of Ag nanoparticles with graft copolymer bearing thiocarbonyl moieties
- Technical Paper
Sajjad Husain Mir, Kyohei Ebata, Hiromu Yanagiya, Bungo Ochiai
Fabrication of cell-derived decellularized matrices on three-dimensional (3D)-printed biodegradable polymer scaffolds
- Technical Paper
Takashi Hoshiba, Jin Gong
Size control of CH3NH3PbBr3 perovskite cuboid fine crystals synthesized by ligand-free reprecipitation method
- Technical Paper
Kazuki Umemoto, Yong-Jin Pu, Cigdem Yumusak, Markus Clark Scharber, Matthew Schuette White, Niyazi Serdar Sariciftci, Tsukasa Yoshida, Jun Matsui, Hiroshi Uji-i, Akito Masuhara
Novel methods to apply micro dynamic stimulations on cultured adhesive cells and its application in constructing gel-embedded three-dimensional neuronal structures differentiated from human iPS cells
- Technical Paper
Tadashi Kosawada, Keita Ohnishi, Hiroaki Satoh, Zhong-gang Feng, Kaoru Goto
Electric control of friction on surface of high-strength hydrogels
- Technical Paper
Masato Wada, Kohei Yamada, Toshiki Kameyama, Naoya Yamada, Kazunari Yoshida, Azusa Saito, Masato Makino, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa
ZnO/TiO2 core–shell photoelectrodes for dye-sensitized solar cells by screen printing and room temperature ALD
- Technical Paper
He Sun, Hayato Kurotaki, Kensaku Kanomata, Fumihiko Hirose, Matthew Schuette White, Tsukasa Yoshida
Nanocellular foams confined within PS microfibers obtained by CO2 batch foaming process
- Technical Paper
Paritat Muanchan, Hiroshi Ito
Effect of thermal annealing on crystallinity and mechanical strength of textile glass and carbon fiber reinforced in situ polymerized ϵ-caprolactam parts
- Technical Paper
Kentaro Taki, Hiroto Suenaga, Hiroshi Ito
Fabrication and hemocompatibility of carboxy-chitosan stabilized magnetite nanoparticles
- Technical Paper
Md. Abdur Rahman, Bungo Ochiai
Selective recovery of Au(III), Pd(II), and Ag(I) from printed circuit boards using cellulose filter paper grafted with polymer chains bearing thiocarbamate moieties
- Technical Paper
M. K. Mohammad Ziaul Hyder, Bungo Ochiai
A simple method for evaluating the balance of the autonomic nervous system using photoplethysmography
- Technical Paper
Minami Tsuchiya, Michio Yokoyama
Microwave-assisted hydrothermal synthesis of ZnO and Zn-terephthalate hybrid nanoparticles employing benzene dicarboxylic acids
- Technical Paper
Yuji Hirai, Koji Furukawa, He Sun, Yuta Matsushima, Keiji Shito, Akito Masuhara, Ryoma Ono, Yuma Shimbori, Hidenobu Shiroishi, Matthew Schuette White, Tsukasa Yoshida
New fabrication method and properties of porous metals produced by ultrasonic control of microbubble size
- Technical Paper
Ayaka Katayose, Ryosuke Yokose, Kento Obata, Toshinori Makuta
Selective hybridization of organic dyes with CuSCN during its electrochemical growth
- Technical Paper
Yuki Tsuda, Kyota Uda, Misaki Chiba, He Sun, Lina Sun, Matthew Schuette White, Akito Masuhara, Tsukasa Yoshida
Evaluation of internal network structure of transparent shape memory gels and application of T-SMG to develop gel devices
- Technical Paper
Hiroaki Kumagai, Kazuyuki Sakai, Masaru Kawakami, Hidemitsu Furukawa, Kyoko Murase, Tsutom Sunada
Fabrication of silica-coated hollow particles by using ultrasonically generated microbubbles
- Technical Paper
Takeyuki Hamada, Hiroyuki Izumi, Tatsuya Makino, Toshinori Makuta
Evaporation of droplets: the effect of interaction between droplets and the existence of obstacles
- Technical Paper
Muhamad Firdaus bin Daud, Kyuuichiro Takamatsu, Masato Makino, Hidemitsu Furukawa
3D printing of police whistles for STEM education
- Technical Paper
Masato Makino, Kodai Suzuki, Kyuichiro Takamatsu, Atsuki Shiratori, Azusa Saito, Kazuyuki Sakai, Hidemitsu Furukawa
Recycled carbon black from waste of tire industry: thermal study
- Technical Paper
Rana Ida Sugatri, Yudo Chandrasa Wirasadewa, Kurniawan Eko Saputro, Ersan Yudhapratama Muslih, Radyum Ikono, Muhamad Nasir
Mechanism of ultra-low friction of multilayer graphene studied by all atom molecular dynamics
- Technical Paper
Tatsuya Maeda, Hitoshi Washizu
Inter node parallelization of multiscale fluid particle simulation towards large-scale polymeric fluid simulation
- Technical Paper
Takahiro Murashima
International conference on wafer bonding for MEMS technologies and wafer level integration
- Editorial
Roy Knechtel
Surface pretreated low-temperature aluminum–aluminum wafer bonding
- Open Access
- Technical Paper
Andreas P. Hinterreiter, Bernhard Rebhan, Christoph Flötgen, Viorel Dragoi, Kurt Hingerl
Defect analysis using scanning acoustic microscopy for bonded microelectronic components with extended resolution and defect sensitivity
- Technical Paper
Sebastian Brand, Günther Vogg, Matthias Petzold
Polymer bonding temperature impact on bonded stack morphology and adherence energy
- Technical Paper
P. Montméat, T. Enot, G. Louro De Oliveira, F. Fournel
Influence of water diffusion in deposited silicon oxides on direct bonding of hydrophilic surfaces
- Technical Paper
J. Desomberg, F. Fournel, H. Moriceau, A. Roule, E. Barthel, F. Rieutord
Enhancement of vertical integration density by engineered BSOI wafers
- Technical Paper
C. Kaden, S. Langa, T. Ludewig, A. Schönberger, A. Herrmann, A. Göbel, V. Kolkovsky, W. Jeroch, W. Pufe
A thermodynamic study of voiding phenomena in Cu–Cu thermo-compression wafer bonding
- Technical Paper
B. Rebhan, J. Svoboda, M. Panholzer
