Ausgabe 10/2017
Inhalt (70 Artikel)
Dual-phase-lagging thermoelastic damping in-extensional vibration of rotating nano-ring
- Review Paper
Najat A. Alghamdi, Hamdy M. Youssef
Potentials in synthesizing nanostructured silver particles
- Review Paper
Santheraleka Ramanathan, Subash C. B. Gopinath
Design and analytical analysis of a large-range tri-symmetrical 2R1T compliant mechanism
- Review Paper
Guangbo Hao, Fukang Dai, Xiuyun He, Yufei Liu
Role of liquid repellency on fluid slip, fluid drag, and formation of nanobubbles
- Review Article
Bharat Bhushan
A review on pH sensitive materials for sensors and detection methods
- Review Article
Muhammad Imran Khan, Koushik Mukherjee, Rizwan Shoukat, Huang Dong
Micro real-time PCR device using a circulation pump
- Technical Paper
Byung-Phil Mun, Chang-Ju Park, Jae-Kwon Lee, Kyoungsook Park, Jong-Hyun Lee
High performance planar micro-transformer using novel crossover connection
- Technical Paper
Bahram Azizollah Ganji, Mohammad Molanzadeh
Facial fabrication of paper-based flexible electronics with flash foam stamp lithography
- Technical Paper
XinHua Yao, Tian Jia, ChaoQi Xie, JianZhong Fu, Yong He
Vibration protection of laptop hard disk drives in harsh environmental conditions
- Technical Paper
Ashkan Haji Hosseinloo
Modeling microfluidic DNA extraction using superparamagnetic bead particles in COMSOL multiphysics simulation
- Technical Paper
Gauri Samla, Kok Beng Gan, Sue-Mian Then
Alleviation of residual oscillations in electrostatically actuated variable-width microbeams using a feedforward control strategy
- Technical Paper
R. K. Godara, M. M. Joglekar
A novel low-power compact WBS human body channel receiver for wearable vital signal sensing application in wireless body-area network
- Technical Paper
Ke Lin, Bo Wang, Xing Zhang, Xinan Wang, Tingbin Ouyang, Hao Chen
Static bending behaviors of piezoelectric nanoplate considering thermal and mechanical loadings based on the surface elasticity and two variable refined plate theories
- Technical Paper
Farzane Abbasi, Aazam Ghassemi
Development and analysis of electro-optical microresonator with low range natural frequency
- Technical Paper
Giedrius Janušas, Arvydas Palevičius, Elingas Čekas, Alfredas Brunius
Photoelectrocatalytic microreactor for seawater decontamination with negligible chlorine generation
- Technical Paper
Ning Wang, Furui Tan, Chi Chung Tsoi, Xuming Zhang
Design, fabrication and characterization of 1.0 μm Gap Al based interdigitated electrode for biosensors
- Technical Paper
R. D. A. A. Rajapaksha, U. Hashim, C. A. N. Fernando
Design, fabrication, characterization of micromachined capacitive shunt switches with low actuation voltages and low temperature packaging
- Technical Paper
S. Lakshmi, Premila Manohar, K. Natarajan, P. Naga Sayanu
Theoretical consideration of electromigration damage around a right-angled corner in a passivated line composed of dissimilar metals
- Technical Paper
Masumi Saka, Yasuhiro Kimura, Xu Zhao
Design and optimization of a novel structural MEMS piezoresistive pressure sensor
- Technical Paper
Chuang Li, Francisco Cordovilla, R. Jagdheesh, José L. Ocaña
A liquid molding method for the fabrication of microfluidic devices based on a drop-on-demand generation of patterned substrates
- Technical Paper
Lijun Yang, Li Zhu, Zong’an Li, Baochun Lu
Fabrication and investigation of low actuation voltage curved beam bistable MEMS switch
- Technical Paper
C. Joshitha, B. S. Sreeja, S. Sasi Princy, S. Radha
Size-dependent asymmetric buckling of initially curved shallow nano-beam using strain gradient elasticity
- Technical Paper
Kaamran Raahemifar
Design and implementation of a rigid-flex RF front-end system-in-package
- Technical Paper
Peng Wu, Fengman Liu, Jun Li, Cheng Chen, Fengze Hou, Liqiang Cao, Lixi Wan
Toward spirometry-on-chip: design, implementation and experimental results
- Technical Paper
Ebrahim Ghafar-Zadeh, Bahareh Gholamzadeh, Giancarlo Ayala-Charca, Parastoo Baghaei Raveri, Martin Matynia, Mohamad Sawan, Falah Awwad, Sebastian Magierowski
Temperature-dependent free vibration analysis of functionally graded micro-beams based on the modified couple stress theory
- Technical Paper
Alireza Babaei, Mohammad-Reza Sayyed Noorani, Ahmad Ghanbari
Two-dimensional problem of generalized thermoelastic half-space subjected to moving heat source
- Technical Paper
M. M. Amin, A. A. El-Bary, Hamdy M. Youssef
Experimental performance evaluation of smart bimorph piezoelectric actuator and its application in micro robotics
- Technical Paper
Bhaskar Ghosh, R. K. Jain, S. Majumder, S. S. Roy, S. Mukhopadhyay
Effects of an additional air chamber on the sensitivity of a capacitive pressure sensor
- Technical Paper
Jaehyuk Choi, Bumkyoo Choi
Design and analysis of a small-scale magnetically levitated energy harvester utilizing oblique mechanical springs
- Technical Paper
Abdullah Nammari, Seth Doughty, Dustin Savage, Leland Weiss, Arun Jaganathan, Hamzeh Bardaweel
Modeling and process design optimization of a piezoelectric micromachined ultrasonic transducers (PMUT) using lumped elements parameters
- Technical Paper
Achraf Ben Amar, Hung Cao, Ammar B. Kouki
Numerical and experimental investigation on splitting-and-recombination micromixer with E-shape mixing units
- Technical Paper
Xueye Chen, Jienan Shen
A size-dependent model to study nonlinear static behavior of piezoelectric cantilever microbeams with damage
- Technical Paper
Yufang Zheng, Tao Chen, Changping Chen
Analysis of misaligned journal bearing with herringbone grooves: consideration of anisotropic slips
- Technical Paper
Hsiang-Chin Jao, Wang-Long Li, Tien-Lun Liu
A high-force and high isolation metal-contact RF MEMS switch
- Technical Paper
Peigang Deng, Ning Wang, Feng Cai, Longquan Chen
Residual stress modeling and analysis for micro electroforming layer
- Technical Paper
Chang Song, Liqun Du, Xiaojun Li, Yuanqi Li, Leijie Qi, Yu Li
Size-dependent nonlinear instability of shear deformable cylindrical nanopanels subjected to axial compression in thermal environments
- Technical Paper
S. Sahmani, A. M. Fattahi
Using serrated edges to control fluid front motion in microfluidic devices
- Technical Paper
Jingmin Li, Chao Liang, Shuai Wang, Chong Liu
Vibrations of fluid conveying microbeams under non-ideal boundary conditions
- Technical Paper
Duygu Atcı, Süleyman Murat Bağdatlı
Modeling, design and analysis of a micro flying slider in near-field optical storage system
- Technical Paper
Dapeng Zhao, Yuhe Li, Qingxiang Li
A novel ACS fed multi band antenna loaded with mirrored S and L shaped strips for advanced portable wireless communication applications
- Technical Paper
Praveen V. Naidu, Arvind Kumar
Control method of pull-in voltage on the MEMS inertial switch integrating actuator and sensor
- Technical Paper
Jufeng Deng, Chong Liu, Yongping Hao, Shuangjie Liu, Fanjian Meng, Pengpeng Xu
Analysis and testing of a contraction-and-expansion micromixer for micromilled microfluidics
- Technical Paper
Ender Yıldırım
The effect of different shapes of cantilever beam in piezoelectric energy harvesters on their electrical output
- Technical Paper
Lei Jin, Shiqiao Gao, Xiaoya Zhou, Guangyi Zhang
Optimization of a two degrees of freedom compliant mechanism using Taguchi method-based grey relational analysis
- Technical Paper
Thanh-Phong Dao, Shyh-Chour Huang
Thermal shock problem of two-temperature generalized thermoelasticity without energy dissipation with rotation
- Technical Paper
A. K. Khamis, M. A. H. Ismail, Hamdy M. Youssef, A. A. El-Bary
Dielectrophoretic effect on droplet dynamic behaviors in microchannels
- Technical Paper
Y. Yan, D. Guo, S. Z. Wen
Study of adhered particle’s secondary migration on the slider air bearing surface
- Technical Paper
Sen Liu, Hui Li, Shengnan Shen, Xiangyu Dai, Shijing Wu, Hejun Du
Development and reliability study of 3D WLCSP for CMOS image sensor using vertical TSVs with 3:1 aspect ratio
- Technical Paper
Zhiyi Xiao, Mingjun Yao, Daquan Yu, Minghao Zhou, Fengwei Dai, Jun Fan, Min Xiang, Wei Zhang
Application of fractional order theory to a functionally graded perfect conducting thermoelastic half space with variable Lamé’s Modulii
- Technical Paper
Mohamed H. Hendy, Magdy M. Amin, Magdy A. Ezzat
Surface layer and nonlocal parameter effects on the in-phase and out-of-phase natural frequencies of a double-layer piezoelectric nanoplate under thermo-electro-mechanical loadings
- Technical Paper
Morteza Karimi, Ali Reza Shahidi, Saeed Ziaei-Rad
Parametric vibrations of imperfect Timoshenko microbeams
- Technical Paper
Mergen H. Ghayesh, Hamed Farokhi
Two temperature theory of initially stressed electro-microstretch medium without energy dissipation
- Technical Paper
Renu Yadav, Kapil Kumar Kalkal, Sunita Deswal
Magnetic field assisted bonding technology for released micro actuator and mirror surface
- Technical Paper
Yuan Xue, Siyuan He
Numerical study on the shrinkage behavior of SU-8 patterns
- Technical Paper
Zhifu Yin, E. Cheng, Helin Zou
Fabrication and characterization of a high frequency and high coupling coefficient CMUT array
- Technical Paper
R. Manwar, T. Simpson, A. Bakhtazad, S. Chowdhury
Effect of rotation on a micropolar magneto-thermoelastic solid in dual-phase-lag model under the gravitational field
- Technical Paper
Mohamed I. A. Othman, Elsayed M. Abd-Elaziz
On size-dependent thermal buckling and free vibration of circular FG Microplates in thermal environments
- Technical Paper
Majid Ghadiri, Mohammad Mahinzare, Navvab Shafiei, Khashayar Ghorbani
Numerical and experimental analysis of cold gas microthruster geometric parameters by univariate and orthogonal method
- Technical Paper
Xiangming Xu, Xingchen Li, Jian Zhou, Baojun Zhang, Dingbang Xiao, Yiyong Huang, Xuezhong Wu
Freestanding electrostatic scratch drive microstructures using lamination of photosensitive films for microfluidics and microrobotics applications
- Technical Paper
Hui Li, Jing Chen, Jinyong Zhang, Nannan Zhang, Lei Wang, Jiahong Zheng
Design, development and characterization of variable reluctance ferrofluid pump
- Technical Paper
Bharathkumar Hegde, N. S. Dinesh
Performance evaluation of a strain-gauge force sensor for a haptic robot-assisted catheter operating system
- Technical Paper
Linshuai Zhang, Shuxiang Guo, Huadong Yu, Yu Song
Optimal design and experimental performances of an integrated linear actuator with large displacement and high resolution
- Technical Paper
Xiaoqing Sun, Yikun Yang, Wei Hu, Bintang Yang
Rapid prototyping of cyclic olefin copolymer based microfluidic system with CO2 laser ablation
- Technical Paper
Jianchen Cai, Jinyun Jiang, Feng Gao, Guangnan Jia, Jian Zhuang, Gang Tang, Yiqiang Fan
A novel uncooled thermal imaging sensor using MEMS transistor
- Technical Paper
Masoud Pourgholam, Bahram Azizollah Ganji
Buckling analysis of CNT-reinforced beams with arbitrary boundary conditions
- Technical Paper
A. M. Fattahi, Babak Safaei
Cross-section design of multi-lumen extrusion dies: study on the effects of die swell and gas flow rate of the lumen
- Technical Paper
Guobao Jin, Yifei Jin, Danyang Zhao, Guanghui Dai, Qingqing Zhang
Thermo-electro-mechanical size-dependent postbuckling response of axially loaded piezoelectric shear deformable nanoshells via nonlocal elasticity theory
- Technical Paper
S. Sahmani, A. M. Fattahi
Nonlocal temperature-dependent postbuckling behavior of FG-CNT reinforced nanoshells under hydrostatic pressure combined with heat conduction
- Technical Paper
A. M. Fattahi, S. Sahmani
