Ausgabe 12/2015 The 24th ASME Annual Conference on Information Storage and Processing Systems, Santa Clara, CA, USA
Inhalt (37 Artikel)
The 24th ASME annual conference on information storage and processing systems, Santa Clara, CA, USA
- Editorial
Kyoung-Su Park, Jen-Yuan (James) Chang
Flying stability of a slider with a damaged diamond like carbon layer induced by confined optical energy in a thermally assisted magnetic recording system
- Technical Paper
Jonghak Choi, Kyoung-Su Park, No-Cheol Park, Young-Pil Park
Simplified precise model of Reynolds equation for simulating ultra-thin gas film lubrication in hard disk drives
- Technical Paper
Bao-Jun Shi, Yu-Jie Feng, Jia-Dong Ji, Longqiu Li, Chuanwei Zhang
Advanced operational shock analysis considering ramp–disk contact for 2.5-inch stamped base HDD
- Technical Paper
Geonyup Lim, Kyoung-Su Park, No-Cheol Park, Young-Pil Park
Fretting wear volume and wear coefficient at the dimple/gimbal interface of a hard disk drive suspension
- Technical Paper
Zhengqiang Tang, Frank E. Talke
Vibration reduction design for image transfer belt system with optimal control configuration
- Technical Paper
Jie Yu, Hiroshi Yamaura
Advanced air-bearing modeling for operational shock analysis of a 2.5-inch HDD with ramp–disk contact
- Technical Paper
Kyoung-Su Park, No-Cheol Park
Force control for position interface industrial manipulator working in unknown environment
- Technical Paper
Mohammad Al Mashagbeh, Mir Behrad Khamesee
Analysis of the influence of soldering parameters on multi-layer ceramic capacitor vibration
- Technical Paper
Yi-Qi Wang, Byung-Han Ko, Sang-Geuk Jeong, Kyoung-Su Park, No-Cheol Park, Young-Pil Park
Operational shock response of ultrathin hard disk drives
- Technical Paper
Shengkai Yu, Jianqiang Mou, Wei Hua, Weidong Zhou, Chye Chin Tan
Characterization of nonlinear, non-stationary, nano-scale surfing contact dynamics of TFC slider utilizing high order spectra detection
- Technical Paper
Gang Chen, Xiandong Liu, Jen-Yuan Chang
Investigation of slider flying characteristics and frequency response in helium-air gas mixtures
- Technical Paper
Zhengqiang Tang, Frank E. Talke
Effect of a void on the heat transfer in the head disk interface
- Technical Paper
Chuanwei Zhang, Alex Phan, Young Woo Seo, Andrey Ovcharenko, Min Yang, Frank E. Talke
Virtual performance evaluation of an industrial SCARA robot prior to real-world task
- Technical Paper
Mohammad Al Mashagbeh, Mir Behrad Khamesee
Fluorescence detection of minute particles using a resin-based optical total analysis system with a high-aspect-ratio light waveguide core
- Technical Paper
Toshifumi Ohkubo, Nobuyuki Terada, Yoshikazu Yoshida
Method for quick prediction of windage power loss
- Technical Paper
Q. D. Zhang, K. Sundaravadivelu, N. Y. Liu, Q. Jiang
Analysis and improvement of shock performance of a container for the cartridge in a Blu-ray type archiving system
- Technical Paper
Wonseok Oh, No-Cheol Park, Young-Pil Park, SeungHon Yoo
Numerical investigation of thermal effects on a HAMR head-disk interface
- Technical Paper
Kyaw Sett Myo, Weidong Zhou, Xiaoyang Huang, Shengkai Yu
Monte Carlo simulation of the manufacturing tolerance in FDBs to identify the sensitive design variables affecting the performance of a disk-spindle system
- Technical Paper
Jihoon Lee, Minho Lee, Kyobong Kim, Chiho Kang, Hokyung Jang, Gunhee Jang
Design and optimization of collocated dual stage suspensions
- Technical Paper
Yangfan Wang, Longqiu Li, Karcher Morris, John Hogan, Frank E. Talke
Parallel micro manipulator for optical spot array alignment of maskless lithography
- Technical Paper
Zheng Yuan Li, Jong Yoon Choi, Yong Seok Ihn, Sang-Hoon Ji, Ja Choon Koo
Effect of additional harmonics of driving current on torque ripple and unbalanced magnetic force in HDD spindle motors with stator and rotor eccentricity
- Technical Paper
Sangjin Sung, Gunhee Jang, Kyungjin Kang, Jeongyong Song
Low SNR signal processing for head/media contact detection in HDD
- Technical Paper
Antanas Daugela, Srinivas Tadepalli
Stability analysis of a whirling rigid rotor supported by stationary grooved FDBs considering the five degrees of freedom of a general rotor-bearing system
- Technical Paper
Minho Lee, Jihoon Lee, Gunhee Jang
Optical head alignment method using serial manipulators for maskless lithography system
- Technical Paper
Jong Yoon Choi, Sae Whan Park, Yong Seok Ihn, Hyouk Ryeol Choi, Hyungpil Moon , Ja Choon Koo
Design parametric study on the influence of anti-shock performance during operational condition for a 2.5 inch HDD
- Technical Paper
Geonyup Lim, Kyoung-Su Park, No-Cheol Park, Young-Pil Park, Younghyun Lee, Young Bae Chang, Cheol-soon Kim
Crosstalk analysis for multiple-image encryption and image-quality equalization technology
- Technical Paper
Do-Hyung Kim, Sungbin Jeon, No-Cheol Park, Young-Pil Park
Optimizing an on-chip boost DC–DC converter with an on-chip or on-board inductor
- Technical Paper
Paul C.-P. Chao, Chun-Kai Cheng, Ching-Huan Kuan
Design and development of a new wireless fall detection module for homecare
- Technical Paper
Trong-Hieu Tran, Paul C.-P. Chao, Li-Chi Hsu, Chun-Wei Chiu, Yung-Hua Kao
Effect of the cross-sectional shape of the recirculation channel on expulsion of air bubbles from FDBs used in HDD spindle motors
- Technical Paper
Yeonha Jung, Gunhee Jang, Chiho Kang, Hyunho Shin, Jongyeop Jeong
Accurate detection of light contact of thermal fly-height control sliders using advanced singular value decomposition
- Technical Paper
Tian He, Gang (Sheng) Chen, Xiandong Liu
A new prediction model on the luminance of OLEDs subjected to different reverse biases for alleviating degradation in AMOLED displays
- Technical Paper
Ming-Hung Yu, Trong-Hieu Tran, Yen-Ping Hsu, Paul C.-P. Chao, Kuei-Yu Lee, Yung-Hua Kao
Intelligence control system compensation by DNA coding method in holographic data storage system
- Technical Paper
Jang Hyun Kim, Hyunseok Yang, Wooyoung Jeong
Analysis of thermal flying-height control slider in a hard disk drive under humid air condition
- Technical Paper
Jonghak Choi, Kyoung-Su Park, No-Cheol Park, Young-Pil Park, Eo-Jin Hong, Yonghyun Lee, Cheol-Soon Kim
Robust hub design to prevent mechanical contact between the hub and sleeve of FDBs in an HDD due to disc clamping force
- Technical Paper
Bumcho Kim, Gunhee Jang
Prediction of vibration in PM synchronous motor based on calculation of stator natural frequency
- Technical Paper
Yinquan Yu, Chao Bi, Quan Jiang, Song Lin, Nay Lin Htun Aung, A. Al Mamun
