Ausgabe 12/2017
Inhalt (70 Artikel)
All-polymeric planar waveguide devices based on a gas-assisted thermal imprinting technique
- Technical Paper
Lei Wan, Ning Zhu, Rui-ying Zhang, Ting Mei
Analytical modeling, simulation and experimental study for nonlinear hybrid piezoelectric–electromagnetic energy harvesting from stochastic excitation
- Technical Paper
Ping Li, Shiqiao Gao, Xiaoya Zhou, Haipeng Liu, Jitao Shi
Design of VCM actuator with the chamfered edge magnet for cellphone
- Technical Paper
Chang-Lin Hsieh, Hsiao-Yu Wang, Yu-Hao Chang, Chien-Sheng Liu
Nonlinear thermo-mechanical behaviour of MEMS resonators
- Technical Paper
Hamed Farokhi, Mergen H. Ghayesh
Design of a capacitive MEMS double beam switch using dynamic pull-in actuation at very low voltage
- Technical Paper
Hatem Samaali, Fehmi Najar
Deflection of circular diaphragm-type piezoactuators coupling with gas compression in micropumps
- Technical Paper
Yuanlin Hu, Xin Liang, Wen Wang
Si (100) and (110) etching properties in 5, 15, 30 and 48 wt%KOH aqueous solution containing Triton-X-100
- Technical Paper
Hiroshi Tanaka, Masato Takeda, Kazuo Sato
Concentration and extraction chip of fetal nucleated red blood Cells (NRBCs) by micro gap with diaphragm for fetal DNA diagnosis from maternal blood
- Technical Paper
Takeshi Kumo, Yuichi Tomizawa, Mikiko Kita, Haruo Takabayashi, Yuzuru Takamura
Sensitivity improvement of a dual axis thermal accelerometer with modified cavity structure
- Technical Paper
Rahul Mukherjee, Pradip Mandal, Prasanta Kumar Guha
A waveform design method for high DPI piezoelectric inkjet print-head based on numerical simulation
- Technical Paper
Hongfang Wei, Xiaolei Xiao, Zhifu Yin, Maocong Yi, Helin Zou
Analysis and optimization of a micro-displacement sensor for compliant microgripper
- Technical Paper
Thanh-Phong Dao, Nhat Linh Ho, Tan Thang Nguyen, Hieu Giang Le, Pham Toan Thang, Huy-Tuan Pham, Hoang-Thinh Do, Minh-Duc Tran, Trung Thang Nguyen
Characterization of basket-forceps-type micro-flow-sensor for breathing measurements in small airway
- Technical Paper
Naoaki Harada, Yoshihiro Hasegawa, Ryota Ono, Miyoko Matsushima, Tsutomu Kawabe, Mitsuhiro Shikida
A new method to increase MEMS microphone sensitivity using small circular diaphragm with fixed center
- Technical Paper
Nastaran Nademi, Javad karamdel, Bahram Azizollah Ganji
A low-stress and low temperature gradient microgripper for biomedical applications
- Technical Paper
Einas Gaafar, Musaab Zarog
An improved rotation scheme for Tri-axis rotational inertial navigation system
- Technical Paper
Zengjun Liu, Lei Wang, Wei Wang, Pengyu Gao
Thermo-mechanical interactions in a fractional order generalized thermoelastic solid with diffusion
- Technical Paper
Suman Choudhary, Sunil Kumar, Jitander Singh Sikka
Growth of nanotubes using IC-PECVD as benzene carbon carrier
- Technical Paper
Rizwan Shoukat, Muhammad Imran Khan
Study on characteristics of the piezoelectric energy-harvesting from the torsional vibration of thin-walled cantilever beams
- Technical Paper
Shiqiao Gao, Guangyi Zhang, Lei Jin, Ping Li, Haipeng Liu
Experimental study of micro patterns on conductive ink transfer in a plate-to-roll system
- Technical Paper
Sihun Jeong, Cheonghwan Lee, Jaesool Shim, Chulho Bai
Wide bandwidth 2-DoF electromagnetic MEMS energy harvester for low g applications
- Technical Paper
Muhammad Mubasher Saleem, Adnan Murtaza Danish, Javed Iqbal, Shafaat Ahmed Bazaz
A new modulation method to generate all-optical logic gates in an AOTF
- Technical Paper
M. V. N. Oliveira, A. G. Coelho Jr, C. S. Sobrinho, A. C. Ferreira, J. C. Sales, J. R. R. Sousa, G. F. Guimarães, J. W. M. Menezes, M. L. Lyra, A. S. B. Sombra
Ultrasonic fabrication of micro fluidic channels from polyether ether ketone (PEEK)
- Technical Paper
J. Kosloh, J. Sackmann, W. K. Schomburg
A rapid and high-precision initial alignment scheme for dual-axis rotational inertial navigation system
- Technical Paper
Tianxiao Song, Kui Li, Lei Wang, Jie Sui, Lingcao Wang
Development of a multi frequency impedance measurement system for use in MEMS flow cytometers
- Open Access
- Technical Paper
Neil J. Cole, Andrew M. Richardson, Alako Abdul-Hafiz
Design and optimization of slit-resonant beam in a MEMS pressure sensor based on uncertainty analysis
- Technical Paper
Huichao Shi, Shangchun Fan, Yuwen Zhang
Fabrication process induced changes in scattering parameters of meander type RFMEMS shunt switch
- Technical Paper
Updesh Sharma, Manoj Kumar, Renu Sharma, Tulana Saha, K. K. Jain, Shankar Dutta, E. K. Sharma
Modelling and characterization of a robust, low-power and wide-range thermal wind sensor
- Technical Paper
Yanqing Zhu, Ming Qin, Yizhou Ye, Zhenxiang Yi, Kewen Long, Qing-an Huang
Effect of initial stress on a semiconductor material with temperature dependent properties under DPL model
- Technical Paper
Mohamed I. A. Othman, Ramadan S. Tantawi, Ebtesam E. M. Eraki
Influence of magnetic field on generalized piezo-thermoelastic rotating medium with two relaxation times
- Technical Paper
Mohamed I. A. Othman, Yassmin D. Elmaklizi, Ethar A. A. Ahmed
A novel SU-8 nanofluidic chip fabrication technique based on traditional UV photolithography
- Technical Paper
Zhifu Yin, Bolin Lu, Helin Zou
An innovative fuzzy backstepping sliding mode controller for a Tri-Rotor Unmanned Aerial Vehicle
- Technical Paper
Shiqian Wang, Jingjuan Zhang, Qian Zhang, Chaoying Pei
4H-SiC electrostatic microactuator with optically controlled actuation
- Technical Paper
Feng Zhao, Marcus Daniel Trimble
Magnetothermoelstic analysis for an infinite solid cylinder with variable thermal conductivity due to harmonically varying heat
- Technical Paper
Mohamed I. A. Othman, Ahmed E. Abouelregal
Microfluidic disk for the determination of human blood types
- Technical Paper
Haiwen Li, Ligang Wu, Wuping Zhou, Keming Jiang, Weiwei Fu, Yuefang Dong, Shi Chen, Cong Liu, Tao Zhang, Shaohua Ding, Shengbao Duan, Yong Li
Low-cost and fast fabrication of the ultrasonic embossing on polyethylene terephthalate (PET) films using laser processed molds
- Technical Paper
Jiajing Zhu, Yanling Tian, Chengjuan Yang, Liangyu Cui, Fujun Wang, Dawei Zhang, Xianping Liu
Development of new electrostatic micro cam system driven by elastic wings
- Technical Paper
Phuc Hong Pham, Lam Bao Dang, Viet Hoang Nguyen, Van Thanh Dau
The design and analysis of a novel structural piezoresistive pressure sensor for low pressure measurement
- Technical Paper
Chuang Li, Francisco Cordovilla, José L. Ocaña
Processing optimization of Fresnel lenses manufacturing in the injection molding considering birefringence effect
- Technical Paper
Chao-Ming Lin, Hsiang-Keng Hsieh
Technological aspects of a new micro-electro-mechanical actuation principle: nano-e-drive
- Technical Paper
S. Langa, H. Conrad, B. Kaiser, M. Stolz, M. Gaudet, S. Uhlig, K. Schimmanz, H. Schenk
Deformation-based micro surface texturing using soft backing self-alignment for polymeric material
- Technical Paper
J. A. S. Oh, A. Danno, Wei Zhai, Xu Song
Fabrication and performance characterization of miniature axial fans
- Technical Paper
Hamed Keramati, Weng-Kong Chan, Jianmin Miao
Nonlinear size-dependent dynamic buckling analysis of embedded micro cylindrical shells reinforced with agglomerated CNTs using strain gradient theory
- Technical Paper
H. Tohidi, S. H. Hosseini-Hashemi, A. Maghsoudpour
SiO2 caped Fe3O4 nanostructures as an active heterogeneous catalyst for 4-nitrophenol reduction
- Technical Paper
Muhammad Tariq Shah, Aamna Balouch, Sirajuddin, Ashfaque Ahmed Pathan, Abdullah, Ali Muhammad Mahar, Saman Sabir, Rozina Khattak, Akrajas Ali Umar
Optimization for output power and band width in out-of-plane vibration energy harvesters employing electrets theoretically, numerically and experimentally
- Technical Paper
Chunhui Gao, Shiqiao Gao, Haipeng Liu, Lei Jin, Junhu Lu, Ping Li
Target ssDNA detection of E.coli O157:H7 through electrical based DNA biosensor
- Technical Paper
R. D. A. A. Rajapaksha, U. Hashim, M. N. Afnan Uda, C. A. N. Fernando, S. N. T. De Silva
Design and modelling of droplet based microfluidic system enabled by electroosmotic micropump
- Technical Paper
Nader Gallah, Nizar Habbachi, Kamel Besbes
A comparative study on the design and simulation of TFBAR and polyimide-TFBAR based RF bandpass filters
- Technical Paper
Jyotirmoy Dutta, Atul Vir Singh, Sonal Singhal, Madhur Deo Upadhayay
Efficiency enhanced novel 3T heads V-beam microactuator for low power applications
- Technical Paper
C. Joshitha, B. S. Sreeja, S. Sasi Princy, S. Radha
Impact analysis of convected motion on the carrier frequency of a carrier-driven gyroscope signal
- Technical Paper
Ling Wang, Wei Zhang, Yuan-an Liu, Zeng-ping Zhang, Fu-xue Zhang
Size-dependent static stability of magneto-electro-elastic CNT/MT-based composite nanoshells under external electric and magnetic fields
- Technical Paper
A. Farajpour, A. Rastgoo
Double-sided UV roller imprinting of microstructures on transparent plates
- Technical Paper
Nai-Wen Chang, Cheng-Huan Yang, Sen-Yeu Yang
Design and development of triple band ACS fed antenna with M and rectangular shaped radiating branches for 2.45/5 GHz wireless applications
- Technical Paper
Praveen V. Naidu, Arvind Kumar
Design and simulation of small size MEMS bimaterial cantilever solar cell using piezoelectric layer
- Technical Paper
S. Nazi Mehdizadeh, Bahram Azizollah Ganji
Analytical modeling and optimization of electret-based microgenerators under sinusoidal excitations
- Technical Paper
Cuong C. Nguyen, Damith C. Ranasinghe, Said F. Al-Sarawi
Investigation of parasitic capacitances of In2O5Sn gate electrode recessed channel MOSFET for ULSI switching applications
- Technical Paper
Ajay Kumar, M. M. Tripathi, Rishu Chaujar
Thermoelastic damping in microstretch thermoelastic rectangular plate
- Technical Paper
Geeta Partap, Nitika Chugh
Preparation of hollow out-of-plane hafnium oxide microneedle arrays for transdermal drug delivery
- Technical Paper
Yong-hua Zhang, Stephen A. Campbell, Sreejith Karthikeyan
Hydrodynamically efficient micropropulsion through a new artificial cilia beating concept
- Technical Paper
Yu-An Wu, Bivas Panigrahi, Chia-Yuan Chen
Dynamic response of a nanobeam induced by ramp-type heating and subjected to a moving load
- Technical Paper
Ahmed E. Abouelregal, Ashraf M. Zenkour
A biocompatible and flexible polyimide for wireless sensors
- Technical Paper
Etienne Herth, Kamel Guerchouche, Lionel Rousseau, Laurie E. Calvet, Christophe Loyez
Nonlinear analysis of rotating nanocrystalline silicon microbeams for microgyroscope applications
- Technical Paper
M. Ghommem, A. Abdelkefi
Dynamic characterization of fabricated guided two beam and four beam cantilever type MEMS based piezoelectric energy harvester having pyramidal shape seismic mass
- Technical Paper
Shanky Saxena, Ritu Sharma, B. D. Pant
RF-MEMS switches for a full control of the propagating modes in uniplanar microwave circuits and their application to reconfigurable multimodal microwave filters
- Technical Paper
A. Contreras, J. Casals-Terré, L. Pradell, M. Ribó, J. Heredia, F. Giacomozzi, B. Margesin
Numerical and experimental study of passive fluids mixing in micro-channels of different configurations
- Technical Paper
Sankha Shuvra Das, Shivkant D. Tilekar, Sandeep S. Wangikar, Promod K. Patowari
Parametric modeling of a novel longitudinal vibration-based energy harvester using magneto-electro-elastic materials
- Technical Paper
Meisam Moory Shirbani, Mohammad Shishesaz, Hamid Mohammad Sedighi, Ali Hajnayeb
Design, development and implementation of a low power and high speed pipeline A/D converter in submicron CMOS technology
- Technical Paper
Muhammad Imran Khan, Affaq Qamar, Faisal Shabbir, Rizwan Shoukat
Transient behavior and dynamic pull-in instability of electrostatically-actuated fluid-conveying microbeams
- Technical Paper
Maedeh Lotfi, Mahdi Moghimi Zand, Imman Isaac Hosseini, Mostafa Baghani, Roozbeh Dargazany
Erratum to: Transient behavior and dynamic pull-in instability of electrostatically-actuated fluid-conveying microbeams
- Erratum
Maedeh Lotfi, Mahdi Moghimi Zand, Imman Isaac Hosseini, Mostafa Baghani, Roozbeh Dargazany
Erratum to: Micro real-time PCR device using a circulation pump
- Erratum
Byung-Phil Mun, Chang-Ju Park, Jae-Kwon Lee, Kyoungsook Park, Jong-Hyun Lee
