Zum Inhalt

Microsystem Technologies

Ausgabe 2/2018

Inhalt (51 Artikel)

Influenza viral detection on microfluidic delivery assisted biosensors

  • Review Article

Thangavel Lakshmipriya, Subash C. B. Gopinath, Uda Hashim

2.5/3D dynamically stretchable and permanently shaped electronic circuits

  • Review Article

Imen Chtioui, Frederick Bossuyt, Jan Vanfleteren, Med Hedi Bedoui

Optimal design of high-g MEMS piezoresistive accelerometer based on Timoshenko beam theory

  • Review Article

Feng Liu, Shiqiao Gao, Shaohua Niu, Yan Zhang, Yanwei Guan, Chunhui Gao, Ping Li

Embedded passive components in advanced 3D chips and micro/nano electronic systems

  • Review Article

Muhammad Imran Khan, Huang Dong, Faisal Shabbir, Rizwan Shoukat

Controllable printing droplets on demand by piezoelectric inkjet: applications and methods

  • Review Article

Kai Li, Jun-kao Liu, Wei-shan Chen, Lu Zhang

Thermoelectric spherical shell with fractional order heat transfer

  • Technical Paper

Magdy A. Ezzat, Alla. A. El-Bary

Design and performance analysis of uniform meander structured RF MEMS capacitive shunt switch along with perforations

  • Technical Paper

Akshay Kumar Ravirala, Leela Koteswari Bethapudi, Jeevani Kommareddy, Bhanu Sai Thommandru, Sateesh Jasti, Prakash Raju Gorantla, Ashok Puli, Girija Sravani Karumuri, Srinivasa Rao Karumuri

Design and performance evaluation of a haptic interface based on MR fluids for endovascular tele-surgery

  • Technical Paper

Yu Song, Shuxiang Guo, Xuanchun Yin, Linshuai Zhang, Yu Wang, Hideyuki Hirata, Hidenori Ishihara

A smooth impact drive mechanism actuation method for flapping wing mechanism of bio-inspired micro air vehicles

  • Technical Paper

Yuxin Peng, Li Liu, Yangkun Zhang, Jie Cao, Yang Cheng, Jian Wang

Piezoelectric-driven miniature wheeled robot based on flexible transmission mechanisms

  • Technical Paper

Sui Zhou, Weiping Zhang, Yang Zou, Bin Ou, Zhiyu Xun

Two-temperature theory in Green–Naghdi thermoelasticity with fractional phase-lag heat transfer

  • Technical Paper

Magdy A. Ezzat, Ahmed S. El-Karamany, Alaa A. El-Bary

Design optimization of high performance tapping mode AFM probe

  • Technical Paper

Zhenhua Li, Tielin Shi, Qi Xia

Large deformation of nonlinear elastic nanofilms with surface energy

  • Technical Paper

S. Zeng, K. F. Wang, B. L. Wang, T. T. Guo

Finite element analysis of multi-level interconnection under cyclic thermomechanical loads

  • Technical Paper

Kuo-Tsai Wu, Sheng-Jye Hwang, Huei-Huang Lee, Bing-Yeh Lin

On the performances of a nonlinear hybrid piezoelectric and electromagnetic energy harvester

  • Technical Paper

Ping Li, Shiqiao Gao, Xiaoya Zhou, Haipeng Liu

Design and development of a clip building block system for MEMS

  • Technical Paper

Rizwan Shoukat, Muhammad Imran Khan

Design of VCM actuator with L-shape coil for smartphone cameras

  • Technical Paper

Chang-Lin Hsieh, Yu-Hao Chang, Yu-Ta Chen, Chien-Sheng Liu

Energy management strategy to simplify the hardware structure of wireless sensor nodes

  • Technical Paper

Yiyuan Zhang, Jiahao Zhao, Yajiang Yin, Zheng You

Design and experimental testing of an electro-thermal microgripper for cell manipulation

  • Technical Paper

Aurelio Somà, Sonia Iamoni, Rodica Voicu, Raluca Müller, Muaiyd H. M. Al-Zandi, Changhai Wang

Design and modeling of a frog-shape MEMS capacitive microphone using SOI technology

  • Technical Paper

Sedighe Babaei Sedaghat, Bahram Azizolla Ganji, Reza Ansari

A microfluidic pore model to study the migration of fine particles in single-phase and multi-phase flows in porous media

  • Technical Paper

Jongwon Jung, Shuang Cindy Cao, Young-Ho Shin, Riyadh I. Al-Raoush, Khalid Alshibli, Jin-Woo Choi

Pre-buried mask wet etching for suspended silicon microstructures applied in rocking mass micro-gyroscope

  • Technical Paper

Xiong Wang, Xiao-bin Xu, De-wei Zhang, Xue-zhong Wu

Squeeze film air damping ratio analysis of a silicon capacitive micromechanical accelerometer

  • Technical Paper

Yuming Mo, Lianming Du, BingBing Qu, Bo Peng, Jie Yang

UV-NIL replication of microlens arrays on flexible fluoropolymer substrates

  • Technical Paper

Dalius Jucius, Algirdas Lazauskas, Viktoras Grigaliūnas, Brigita Abakevičienė, Saulius Smetona, Sigitas Tamulevičius

Cylindrical functionally graded shell model based on the first order shear deformation nonlocal strain gradient elasticity theory

  • Technical Paper

Kianoosh Mohammadi, Mohammad Mahinzare, Khashayar Ghorbani, Majid Ghadiri

Modeling and simulation of a suspended microchannel resonator nano-sensor

  • Technical Paper

Manizhe Zakeri, Seyed Mahmoud Seyedi Sahebari

Uncertainty propagation in the buckling behavior of few-layer graphene sheets

  • Technical Paper

A. R. Ghanipour, E. Ghavanloo, S. A. Fazelzadeh, S. Pouresmaeeli

Stress analysis of perforated graphene nano-electro-mechanical (NEM) contact switches by 3D finite element simulation

  • Technical Paper

Mohd Amir Zulkefli, Mohd Ambri Mohamed, Kim S. Siow, Burhanuddin Yeop Majlis, Jothiramalingam Kulothungan, Manoharan Muruganathan, Hiroshi Mizuta

Fabrication of electrochemical carbon-based microelectrodes using electrohydrodynamic jet printing technique

  • Technical Paper

Zheng Xu, Hong-qun Zou, Jing Wang, Meng-qi Zhang, Da-zhi Wang, Jun-shan Liu

Design and analysis of a new three-axis micro-gyroscope

  • Technical Paper

Bo Yang, Chengfu Lu

A method to fabricate high-aspect-ratio microstructures using PMMA photoresist

  • Technical Paper

Tianchong Zhang, Futing Yi, Bo Wang, Jing Liu, Yuting Wang, Yue Zhou

Development of a ceramic injection molding process for liquid jet nozzles to be applied for X-ray free-electron lasers

  • Technical Paper

Volker Piotter, Alexander Klein, Klaus Plewa, Kenneth R. Beyerlein, Henry N. Chapman, Saša Bajt

Analysis of RF MEMS shunt capacitive switch with uniform and non-uniform meanders

  • Technical Paper

K. Girija Sravani, K. Srinivasa Rao

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise
    MKVS GbR/© MKVS GbR, Nordson/© Nordson, ViscoTec/© ViscoTec, BCD Chemie GmbH, Merz+Benteli/© Merz+Benteli, Robatech/© Robatech, Ruderer Klebetechnik GmbH, Xometry Europe GmbH/© Xometry Europe GmbH, Atlas Copco/© Atlas Copco, Sika/© Sika, Medmix/© Medmix, Kisling AG/© Kisling AG, Dosmatix GmbH/© Dosmatix GmbH, Innotech GmbH/© Innotech GmbH, Hilger u. Kern GmbH, VDI Logo/© VDI Wissensforum GmbH, Dr. Fritz Faulhaber GmbH & Co. KG/© Dr. Fritz Faulhaber GmbH & Co. KG, ECHTERHAGE HOLDING GMBH&CO.KG - VSE, mta robotics AG/© mta robotics AG, Bühnen, The MathWorks Deutschland GmbH/© The MathWorks Deutschland GmbH, Spie Rodia/© Spie Rodia, Schenker Hydraulik AG/© Schenker Hydraulik AG