Skip to main content
main-content

Zeitschrift

Microsystem Technologies

Microsystem Technologies 3/2020

Ausgabe 3/2020

Inhaltsverzeichnis ( 35 Artikel )

20.08.2019 | Technical Paper | Ausgabe 3/2020

RF-MEMS for 5G applications: a reconfigurable 8-bit power attenuator working up to 110 GHz. Part 1: design concept, technology and working principles

J. Iannacci

03.09.2019 | Technical Paper | Ausgabe 3/2020

RF-MEMS for 5G applications: a reconfigurable 8-bit power attenuator working up to 110 GHz. Part 2—Experimental characterisation of the RF behaviour

J. Iannacci

27.07.2019 | Technical Paper | Ausgabe 3/2020

Characterization of SOI technology based MEMS differential capacitive accelerometer and its estimation of resolution by near vertical tilt angle measurements

Yashoda Parmar, Nidhi Gupta, Vinita Gond, S. S. Lamba, Siva Rama Krishna Vanjari, Shankar Dutta, K. K. Jain, D. K. Bhattacharya

10.09.2019 | Technical Paper | Ausgabe 3/2020

Large-amplitude parametric response of fluid-conveying nanotubes due to flow pulsations

Ali Farajpour, Mergen H. Ghayesh, Hamed Farokhi

26.07.2019 | Technical Paper | Ausgabe 3/2020

Design and application of a hybrid alignment platform for a double-sided hot embossing process

Cheng-Hsien Wu, Cheng-Hao Chiu, Yu-Hsuan Chen

13.08.2019 | Technical Paper | Ausgabe 3/2020

Fabrication of coplanar microheater platform for LPG sensing applications

Shobi Bagga, Jamil Akhtar, Sanjeev Mishra, Preeti

11.09.2019 | Technical Paper | Ausgabe 3/2020

Effect of complex turbulator on heat transfer of nanomaterial considering turbulent flow

Lian Chen, M. Jafaryar, Ahmad Shafee, Rebwar Nasir Dara, Iskander Tlili, Zhixiong Li

17.10.2019 | Technical Paper | Ausgabe 3/2020

Dielectrophoresis-based microfluidic platform to sort micro-particles in continuous flow

Mohsen Hajari, Amirali Ebadi, Mohammad Javad Farshchi Heydari, Morteza Fathipour, Madjid Soltani

08.08.2019 | Technical Paper | Ausgabe 3/2020

Fabrication method with high-density, high-height microneedle using microindentation method for drug delivery system

Yoshihiro Hasegawa, Yuka Yasuda, Kazuhiro Taniguchi, Mitsuhiro Shikida

10.09.2019 | Technical Paper | Ausgabe 3/2020

Comparative study of tuning of microfabrication parameters for improving electrochemical performance of platinum and glassy carbon microelectrodes in neural prosthetics

Nha Uyen Huynh, Sam Kassegne, George Youssef

05.09.2019 | Technical Paper | Ausgabe 3/2020

Development of a high throughput micro-heater array with controllable temperature for each heating unit

Yiwei Bai, Jiaojiao Tian, Zude Lin, Minmin You, Jingquan Liu, Xiaolin Wang

17.09.2019 | Technical Paper | Ausgabe 3/2020

Shape memory alloy based controllable multi-port microvalve

Christof Megnin, Bahman Moradi, Jannik Zuern, Hinnerk Ossmer, Marcel Gueltig, Manfred Kohl

06.09.2019 | Technical Paper | Ausgabe 3/2020

A piezoelectric cantilever-beam energy harvester (PCEH) with a rectangular hole in the metal substrate

Yuzhong Xiong, Fang Song, Xinghuan Leng

04.09.2019 | Technical Paper | Ausgabe 3/2020

Depth control of ROV in nuclear power plant based on fuzzy PID and dynamics compensation

Mingjie Dong, Jianfeng Li, Wusheng Chou

18.09.2019 | Technical Paper | Ausgabe 3/2020

Fast response and recovery of nano-porous silicon based gas sensor

V. S. Selvakumar, L. Sujatha

18.09.2019 | Technical Paper | Ausgabe 3/2020

An investigation of free vibrations of a strain gradient Timoshenko beams with the method of initial values

Ceyda Nur, Reha Artan

13.08.2019 | Technical Paper | Ausgabe 3/2020

A new hybrid robust control of MEMS gyroscope

Mehran Rahmani, Mohammad Habibur Rahman, Michael Nosonovsky

30.07.2019 | Technical Paper | Ausgabe 3/2020

Fabrication of SU-8 photoresist micro–nanofluidic chips by thermal imprinting and thermal bonding

Lei Sun, Lingpeng Liu, Liping Qi, Ran Guo, Kehong Li, Zhifu Yin, Dongjiang Wu, Jiangang Zhou, Helin Zou

22.08.2019 | Technical Paper | Ausgabe 3/2020

Meat and fish freshness evaluation by functionalized cantilever-based biosensors

Carlos André Bravo Costa, Dionis Grazhdan, Jacek Fiutowski, Eric Nebling, Lars Blohm, Fabian Lofink, Horst-Günter Rubahn, Roana de Oliveira Hansen

05.09.2019 | Technical Paper | Ausgabe 3/2020

Novel capacitance evaluation model for microelectromechanical switch considering fringe and effect of holes in pull-up and pull-down conditions

Kurmendra, Rajesh Kumar

03.09.2019 | Technical Paper | Ausgabe 3/2020 Open Access

Design process and simulation testing of a shape memory alloy actuated robotic microgripper

H. Llewellyn-Evans, C. A. Griffiths, A. A. Fahmy

20.08.2019 | Technical Paper | Ausgabe 3/2020

Development of a MEMS-based barometric pressure sensor for micro air vehicle (MAV) altitude measurement

S. Santosh Kumar, Amit Tanwar

06.09.2019 | Technical Paper | Ausgabe 3/2020

High-selectivity adjustable dual-band bandpass filter using a quantic-mode resonator

Kai Li, Guo-qin Kang, Han Liu, Zhi-yuan Zhao

18.09.2019 | Technical Paper | Ausgabe 3/2020

A parasitic type piezoelectric actuator with an asymmetrical flexure hinge mechanism

Nen Wan, Jianming Wen, Yili Hu, Junwu Kan, Jianping Li

17.09.2019 | Technical Paper | Ausgabe 3/2020

Dusty flow with different water based nanoparticles along a paraboloid revolution: thermal analysis

M. Gnaneswara Reddy, Asiful H. Seikh, M. V. V. N. L. Sudharani, Mohammad Rahimi-Gorji, Nabeel Alharthi

19.09.2019 | Technical Paper | Ausgabe 3/2020

Study on the stability of gas film in electrochemical discharge machining of ultra-white glass micro array holes

Liang Huang, Yan Cao, Feng Jia, Yan Lei

06.08.2019 | Technical Paper | Ausgabe 3/2020

Hot embossing of microstructure with moving induction heating and gas-assisted pressuring

Ching-Chieh Kao, Kun-Cheng Ke, Wei-Cheng Hung, Sen-Yeu Yang

08.08.2019 | Technical Paper | Ausgabe 3/2020

Plane wave propagation in a piezo-thermoelastic rotating medium within the dual-phase-lag model

Ethar A. A. Ahmed, M. S. Abou-Dina, A. F. Ghaleb

18.09.2019 | Technical Paper | Ausgabe 3/2020

A design method for low-frequency rotational piezoelectric energy harvesting in micro applications

Xiaobo Rui, Zhoumo Zeng, Yu Zhang, Yibo Li, Hao Feng, Zi Yang

06.08.2019 | Technical Paper | Ausgabe 3/2020

Implementation of four-port MIMO diversity microstrip antenna with suppressed mutual coupling and cross-polarized radiations

Sandeep Sharma, Mainuddin, Binod Kumar Kanaujia, Mukesh Kumar Khandelwal

04.09.2019 | Technical Paper | Ausgabe 3/2020

Collapse voltage analysis of central annular ring metallized membrane based MEMS micromachined ultrasonic transducer

Reshmi Maity, Shonkho Shuvro, Santanu Maity, N. P. Maity

14.09.2019 | Technical Paper | Ausgabe 3/2020

Kinematic modelling and emulation of robot for traversing over the pipeline in the refinery

Devesh Mishra, Ram Suchit Yadav, Krishna Kant Agrawal

11.09.2019 | Technical Paper | Ausgabe 3/2020

Energy-efficient micromolding and in-mold compounding using ultrasonic vibration energy with enhanced material flow

Hyun-Joong Lee, Keun Park

23.09.2019 | Technical Paper | Ausgabe 3/2020 Open Access

A study on harvesting of PKL electricity

Lovelu Hassan, K. A. Khan

16.09.2019 | Technical Paper | Ausgabe 3/2020

Development and optimization of the laser-assisted bonding process for a flip chip package

Young Moon Jang, Youngil Kim, Sung-Hoon Choa

Aktuelle Ausgaben