Ausgabe 4/2019
Inhalt (35 Artikel)
High-throughput battery materials testing based on test cell arrays and dispense/jet printed electrodes
- Open Access
- Technical Paper
Robert Hahn, Marc Ferch, Kevin Tribowski, Neil Amponsah Kyeremateng, Katrin Hoeppner, Krystan Marquardt, Klaus-Dieter Lang, Wolfgang Bock
Comment on the paper “Microsystem Technologies: (2018) 24:2919–2928”
- Technical Paper
Asterios Pantokratoras
MHD flow with heat and mass transfer of Williamson nanofluid over stretching sheet through porous medium
- Technical Paper
Hameda M. Shawky, Nabil T. M. Eldabe, Kawther A. Kamel, Esmat A. Abd-Aziz
Design, closed-form modeling and analysis of SU-8 based electrothermal microgripper for biomedical applications
- Technical Paper
Muhammad Umar Masood, Muhammad Mubasher Saleem, Umar Shahbaz Khan, Amir Hamza
Dual-wavelength transmission system using double micro-resonator system for EMI healthcare applications
- Technical Paper
I. S. Amiri, M. Bunruangses, K. Chaiwong, R. Udaiyakumar, R. Maheswar, M. N. Hindia, K. B. Dimyati, P. Yupapin
The device characteristics and fabrication method of 72-element CMUT array for long-range underwater imaging applications
- Technical Paper
Licheng Jia, Changde He, Chenyang Xue, Wendong Zhang
Design optimization of active microfluidic mixer incorporating micropillar on flexible membrane
- Technical Paper
Roer Eka Pawinanto, Jumril Yunas, Abdul Manaf Hashim
Micro-textured stainless steel material towards enhancement for adhesion of red blood cell
- Technical Paper
Sheng Zhang, Yuzhen Feng, Tao Li, Wenjing Huang, Yanping Gong, Yuta Sunami
Peristaltic pumping with double diffusive natural convective nanofluid in a lopsided channel with accounting thermophoresis and Brownian moment
- Technical Paper
Noreen Sher Akbar, Muhammad Bilal Habib
Ferromagnetic nano model study for the peristaltic flow in a plumb duct with permeable walls
- Technical Paper
Noreen Sher Akbar, Adil Wahid Butt
Fabrication of high fill-factor aspheric microlens array by dose-modulated lithography and low temperature thermal reflow
- Technical Paper
Junjie Zhu, Mujun Li, Jinfeng Qiu, Huichun Ye
Analysis of non-linear radiative stagnation point flow of Carreau fluid with homogeneous-heterogeneous reactions
- Technical Paper
T. Hayat, Ikram Ullah, M. Farooq, A. Alsaedi
Experimental study of fabricating a four-layers Cantor fractal microfluidic chip by CO2 laser system
- Technical Paper
Zeyang Wu, Xueye Chen, Zhongli Wu, Qijian Zhang, Qi Gao
Digitally-controlled driving power supply for dual-active-valve piezoelectric pump
- Technical Paper
Sun Yeming, Wang Junyao
Physiological analysis of streamline topologies and their bifurcations for a peristaltic flow of nano fluid
- Technical Paper
Sadia Waheed, Anber Saleem, S. Nadeem
Underwater autonomous motion control of a small-scaled spherical robot with neural networks
- Technical Paper
Yanlin He, Lianqing Zhu, Guangkai Sun, Mingli Dong
Design of flexible textile antenna using FR4, jeans cotton and teflon substrates
- Technical Paper
A. Kavitha, J. N. Swaminathan
Unsteady nonlinear convection on Eyring–Powell radiated flow with suspended graphene and dust particles
- Technical Paper
C. S. K. Raju, S. Saleem, M. M. Al-Qarni, S. Mamatha Upadhya
Detection of vowel-like speech: an efficient hardware architecture and it's FPGA prototype
- Technical Paper
Nagapuri Srinivas, Gayadhar Pradhan, Puli Kishore Kumar
Nanoparticle delivery through single walled carbon nanotube subjected to various boundary conditions
- Technical Paper
B. Rezapour, M. A. Fariborzi Araghi
Two-temperature problem of a fiber-reinforced thermoelastic medium with a Mode-I crack under Green–Naghdi theory
- Technical Paper
Nantu Sarkar, Sarhan Y. Atwa
Design and optimization of fully differential capacitive MEMS accelerometer based on surface micromachining
- Technical Paper
Mansour Keshavarzi, Javad Yavand Hasani
Simulation of DNA extraction and separation from salivary fluid by superparamagnetic beads and electromagnetic field in microfluidic platform
- Technical Paper
Samla Gauri, Kok Beng Gan, Sue-Mian Then
Vibrations of shear deformable FG viscoelastic microbeams
- Technical Paper
Mergen H. Ghayesh, Ali Farajpour
Micro-electroforming high aspect ratio microstructures under magnetic field
- Technical Paper
Xinmin Zhang, Xinchao Li, Pingmei Ming, Yanhua Zhang, Liang Yan, Ge Qin
Molecular dynamic simulation of orientation-dependent effect on silicon crystalline during sputtering process of focused ion beam
- Technical Paper
Pei Wang, Qianhuang Chen, Yan Xing, Yuan Li, Chen Fang, Xiaoli Qiu
Exact analytical solution of a homogeneous anisotropic piezo-thermoelasic half-space of a hexagonal type under different fields with three theories
- Technical Paper
Mohamed I. A. Othman, Ethar A. A. Ahmed
Design and analysis of MEMS based piezoelectric energy harvester for machine monitoring application
- Technical Paper
Dipta Chaudhuri, Sudip Kundu, Neela Chattoraj
Design of a novel lower-noise tunneling magnetoresistance micromachined gyroscope
- Technical Paper
Mengwei Li, Xicong Ding, Shiyang Qin
Study on formation control system for underwater spherical multi-robot
- Technical Paper
Yanlin He, Lianqing Zhu, Guangkai Sun, Mingli Dong
Determining Young’s modulus of MEH-PPV film by fitting the unloading curve
- Technical Paper
Gao-yu Zhong, Wei-Qing Yan, Jie Li, Yi-ming Tian
Effect of various masked patterned tools during micro-electrochemical texturing
- Technical Paper
S. Kunar, B. Bhattacharyya
Intelligent controller modelling for steerable robotic bar using bio-inspired control synthesis
- Technical Paper
Kiwon Yeom
Uncertainty of shape memory alloy micro-actuator using generalized polynomial chaos method
- Technical Paper
Fatma Abid, Tarek Merzouki, Abdelkhalak El Hami, Hassen Trabelsi, Lassaad Walha, Mohamed Haddar
