Skip to main content
main-content

Zeitschrift

Microsystem Technologies

Microsystem Technologies 6/2020

Ausgabe 6/2020

Inhaltsverzeichnis ( 35 Artikel )

23.01.2020 | Review Paper | Ausgabe 6/2020 Open Access

Microgripper design and evaluation for automated µ-wire assembly: a survey

H. Llewellyn-Evans, C. A. Griffiths, A. Fahmy

19.12.2019 | Technical Paper | Ausgabe 6/2020

Mimicking kidney re-absorption using microfluidics by considering hydrostatic pressure inside kidney tubules: structural and analytical study

Koushik Guha, Jasti Sateesh, Arindam Dutta, Pratim Sengupta, K. Srinivasa Rao, Ajay Agarwal

12.12.2019 | Technical Paper | Ausgabe 6/2020

Design and simulation of P-TFET for improved ION/IOFF ratio and subthreshold slope using strained Si1−xGex channel heterojunction

Sagarika Choudhury, Neeraj Kumar Niranjan, Krishna Lal Baishnab, Koushik Guha

20.12.2019 | Technical Paper | Ausgabe 6/2020

Experimental and numerical analysis of three Y-shaped split and recombination micromixers based on cantor fractal structures

Kyunghwan Kim, Imran Shah, Muhsin Ali, Shahid Aziz, Muhammad Asad Ullah Khalid, Young Su Kim, Kyung Hyun Choi

20.12.2019 | Technical Paper | Ausgabe 6/2020

Comment on “Microsystem Technologies, (2019) 25:1321–1331”

Asterios Pantokratoras

21.12.2019 | Technical Paper | Ausgabe 6/2020

Power quality improvement using microsystem technology for wind power plant

Emiyamrew Minaye Molla, Chien-Hsun Liu, Cheng-Chien Kuo

20.12.2019 | Technical Paper | Ausgabe 6/2020

Impact of stress effect on triple material gate step-FinFET with DC and AC analysis

Rinku Rani Das, Atanu Chowdhury, Apurba Chakraborty, Santanu Maity

21.12.2019 | Technical Paper | Ausgabe 6/2020

Automated manipulation of zebrafish embryos using an electrothermal microgripper

Zhuo Zhang, Yueqing Yu, Peng Song, Yatao Zhang, Dongming Tian, Huipeng Zhang, Hongmiao Wei, Mingyu Cui, Guoning Si, Xuping Zhang

21.12.2019 | Technical Paper | Ausgabe 6/2020

Effects of bonding position on bending behavior of flexible anisotropic conductive film packages considering neutral surface

Chao-Ming Lin, Chia-Chin Wu

05.02.2020 | Technical Paper | Ausgabe 6/2020

A hybrid platform for three-dimensional printing of bone scaffold by combining thermal-extrusion and electrospinning methods

Jianghui Dong, Ru-Jhang Jhu, Liping Wang, Cho-Pei Jiang, Cory J. Xian

13.01.2020 | Technical Paper | Ausgabe 6/2020

Minimal microfabrication required digital microfluidic system toward point-of-care nucleic acid amplification test application for developing countries

Thien Hoang, Bao-Han Ly, Thanh-Xuan Le, Thanh-Thao Huynh, Hoang-Tuan Nguyen, Toi Van Vo, Thi Thu Hien Pham, Khon Huynh

20.01.2020 | Technical Paper | Ausgabe 6/2020

Design and simulation of MEMS based capacitive pressure sensor for harsh environment

K. Srinivasa Rao, B. Mohitha reddy, V. Bala Teja, G. V. S. Krishnateja, P. Ashok Kumar, K. S. Ramesh

02.01.2020 | Technical Paper | Ausgabe 6/2020

A compact broadband GFET based rectenna for RF energy harvesting applications

Neeta Singh, Sachin Kumar, Binod Kumar Kanaujia, Mirza Tariq Beg, Mainuddin, Sandeep Kumar

09.01.2020 | Technical Paper | Ausgabe 6/2020

Novel features for intensive human activity recognition based on wearable and smartphone sensors

Asmita Nandy, Jayita Saha, Chandreyee Chowdhury

04.01.2020 | Technical Paper | Ausgabe 6/2020

Optimization of a synthetic jet based piezoelectric air pump and its application in electronic cooling

Cheng Liu, Yuchuan Zhu, Changwen Wu

09.01.2020 | Technical Paper | Ausgabe 6/2020

Impact-driven broadband piezoelectric energy harvesting using a two-degrees-of-freedom structure

Wei-Jiun Su

06.01.2020 | Technical Paper | Ausgabe 6/2020

Analyzing the piezoelectric rings resonance modes for bandwidth ultrasonic transducers

Reza Rahnama

08.01.2020 | Technical Paper | Ausgabe 6/2020

Investigation of modal properties and layout of elastomer diaphragm tanks in telecommunication satellite

Hossein Sabaghzadeh, Mazyar Shafaee

13.01.2020 | Technical Paper | Ausgabe 6/2020

A MEMS based Fabry–Pérot accelerometer with high resolution

Minghui Zhao, Kangli Jiang, Hongwu Bai, Hairong Wang, Xueyong Wei

14.01.2020 | Technical Paper | Ausgabe 6/2020

Testing of aluminium and its alloys as structural materials for a MEMS switch

Ilia V. Uvarov, Roman V. Selyukov, Victor V. Naumov

13.01.2020 | Technical Paper | Ausgabe 6/2020 Open Access

Fabrication of high-resolution conductive patterns on a thermally imprinted polyetherimide film by the capillary flow of conductive ink

Takashi Kurose, Hiroto Shishido, Akira Ishigami, Akihiko Nemoto, Hiroshi Ito

23.01.2020 | Technical Paper | Ausgabe 6/2020

Characterisation of the internal resonances of a clamped-clamped beam MEMS resonator

Praveen Kumar, Mandar M. Inamdar, Dnyanesh N. Pawaskar

01.02.2020 | Technical Paper | Ausgabe 6/2020

Design and analysis of MEMS based electrospray thruster

K. Srinivasa Rao, Y. Sundar Sai Kumar, K. Sai Sree Rohini, P. Ravi, K. G. Sravani, P. Ashok Kumar

23.01.2020 | Technical Paper | Ausgabe 6/2020

Nonlinear stability of electro-visco-elastic Walters’ B type in porous media

Galal M. Moatimid, Marwa H. Zekry

31.01.2020 | Technical Paper | Ausgabe 6/2020

Perforated serpentine membrane with AlN as dielectric material shunt capacitive RF MEMS switch fabrication and characterization

Lakshmi Narayana Thalluri, Koushik Guha, K. Srinivasa Rao, G. Venkata Hari Prasad, K. Girija Sravani, K. S. R. Sastry, Appala Raju Kanakala, P. Bose Babu

25.01.2020 | Technical Paper | Ausgabe 6/2020

Tuning and widening the bandwidth of vibration energy harvesters using a ferrofluid embedded mass

Nathan Jackson

07.03.2020 | Technical Paper | Ausgabe 6/2020

A coupled nonlinear nonlocal strain gradient theory for functionally graded Timoshenko nanobeams

Alireza Gholipour, Mergen H. Ghayesh

01.02.2020 | Technical Paper | Ausgabe 6/2020 Open Access

Parametric study of 3D printed microneedle (MN) holders for interstitial fluid (ISF) extraction

Robert M. Taylor, Dilendra Maharjan, Fernando Moreu, Justin T. Baca

03.02.2020 | Technical Paper | Ausgabe 6/2020

Investigation into effect of coupled resonance phenomenon towards sensitivity enhancement of SAW conductivity sensors integrated with ZnO nanorods

Ajay Achath Mohanan, N. Ramakrishnan

04.02.2020 | Technical Paper | Ausgabe 6/2020

Design, manufacturing and experimental validation of a bonded dual-component microstructured system for vertical light emission

Michael Jakubowsky, Jerome Werder, Christian Rytka, Per Magnus Kristiansen, Andreas Neyer

04.02.2020 | Technical Paper | Ausgabe 6/2020

Integrated cutting force measurement system based on MEMS sensor for monitoring milling process

Yafei Qin, Dong Wang, Youpeng Yang

05.02.2020 | Technical Paper | Ausgabe 6/2020

Investigations into surface topography of glass microfeatures formed by pulsed electrochemical discharge milling for microsystem applications

Aman Kumar Verma, Dileep Kumar Mishra, Karan Pawar, Pradeep Dixit

10.02.2020 | Technical Paper | Ausgabe 6/2020

Development of a paper-based pressure sensor fabricated by an inkjet-printed water mask method

Netchanok Jiranusornkul, Sattawat Kraduangdej, Nakannan Niltawach, Alongkorn Pimpin, Werayut Srituravanich

11.02.2020 | Technical Paper | Ausgabe 6/2020

Temporal instability of a confined nano-liquid film with the Marangoni convection effect: viscous potential theory

Galal M. Moatimid, Mohamed A. Hassan, Mona A. A. Mohamed

12.02.2020 | Technical Paper | Ausgabe 6/2020

Nanosecond laser direct micron-scale texturing with breath figure method

Yuan-Jen Chang, Shih-Han Chou, Chao-Ching Ho, Jin-Chen Hsu, Chia-Lung Kuo

Aktuelle Ausgaben