Ausgabe 7/2017
Inhalt (70 Artikel)
Flexible piezoelectric micromachined ultrasonic transducer (pMUT) for application in brain stimulation
- Technical Paper
Jin-Hyung Lee, Il-Joo Cho, Kyungmin Ko, Eui-Sung Yoon, Hyung-Ho Park, Tae Song Kim
MEMS design and modelling based on resonant gate transistor for cochlear biomimetical application
- Technical Paper
R. Latif, B. Y. Majlis, R. Cheung
Centrifuge-based micromixer with three-dimensional square-wave microchannel for blood plasma mixing
- Technical Paper
Ju-Nan Kuo, Yi-Siou Li
Ultraviolet irradiation of lubricant and additives thin films to reduce wear to the magnetic head
- Technical Paper
Lawrence Ng Wah, Nimura Kazuo, Yonggang Meng
Design and experimental validation of a linear piezoelectric micromotor for dual-slider positioning
- Technical Paper
Yuxin Peng, Huiying Wang, Shu Wang, Jian Wang, Jie Cao, Haoyong Yu
Optimization of structures of DC RF MEMS series switches for low actuation
- Technical Paper
Lakshmi S, Premila Manohar, Naga Sayanu P
Frequency response of an electrostatically actuated micro resonator in contact with incompressible fluid
- Technical Paper
Ghader Jabbari, Rasoul Shabani, Ghader Rezazadeh
Coupled twist–bending static and dynamic behavior of a curved single-walled carbon nanotube based on nonlocal theory
- Technical Paper
Hasti Hayati, Seyyed Amirhosein Hosseini, Omid Rahmani
Coupled electromechanical analysis of MEMS-based energy harvesters integrated with nonlinear power extraction circuits
- Technical Paper
Abdolreza Pasharavesh, M. T. Ahmadian, H. Zohoor
Experimental study and analysis of unimorph piezoelectric energy harvester with different substrate thickness and different proof mass shapes
- Technical Paper
S. Sunithamani, P. Lakshmi
Application of fractional order theory of magneto-thermoelasticity to an infinite perfect conducting body with a cylindrical cavity
- Technical Paper
Magdy A. Ezzat, Alaa. A. El-Bary
Modeling and verification of a piezoelectric frequency-up-conversion energy harvesting system
- Technical Paper
Shun Chen, Li Ma, Tao Chen, Huicong Liu, Lining Sun, Jianxiang Wang
Fabrication of a silicon based vertical sensitive low-g inertial micro-switch for linear acceleration sensing
- Technical Paper
Fengtian Zhang, Mingquan Yuan, Weifeng Jin, Zhuang Xiong
Microfabricated centrifugal pump driven by an integrated synchronous micromotor
- Technical Paper
M. Matar, A. T. Al-Halhouli, A. Dietzel, S. Büttgenbach
Design, modeling and test of a novel compliant orthogonal displacement amplification mechanism for the compact micro-grasping system
- Technical Paper
Weilin Chen, Xianmin Zhang, Sergej Fatikow
Precision positioning using a novel six axes compliant nano-manipulator
- Technical Paper
Samin Akbari, Tohid Pirbodaghi
Development of a continuous injection direct rolling imprint system for microstructure thin-plate
- Technical Paper
Yan Lou, Guohui Wu, Jibin Li, Haixiong Wang, Chen Bai
Performance and reliability concern scheme for efficient garbage collection and wear leveling on flash memory-based solid state disk
- Technical Paper
Ahmed Izzat Alsalibi, Putra Sumari, Saleh A. Alomari, Mohammed Azmi Al-Betar
Shear effect on dynamic behavior of microcantilever beam with manufacturing process defects
- Technical Paper
Hicham Bourouina, Réda Yahiaoui, Elmar Yusifli, Mohammed El Amine Benamar, Kamal Ghoumid, Guillaume Herlem
Effect of vacuum venting and mold wettability on the replication of micro-structured surfaces
- Technical Paper
Marco Sorgato, Davide Masato, Giovanni Lucchetta
A WR-3 dual-band bandpass filter based on parallel coupling structure
- Technical Paper
Yulin Huang, Xinyi Li, Jingfu Bao, Xinghai Zhao, Yingbin Zheng, Yijia Du, Yiling Wang
The effect of nonlinear elasticity on the large amplitude free vibration behavior of elastic plates at small scale
- Technical Paper
S. Zeng, B. L. Wang
Bistability in a symmetric out-of-plane microstructure
- Technical Paper
T. M. Lucas, D. A. Porter, J. Beharic, T. A. Berfield, C. K. Harnett
Analysis of effective vibration frequency of cable-driven parallel robot using mode tracking and quasi-static method
- Technical Paper
Hyun-Dong Do, Kyoung-Su Park
Back heating effect of media hot spot at nanoscale head–disk interface
- Technical Paper
Kyaw Sett Myo, Weidong Zhou, Xiaoyang Huang, Peng Yu
A resonant microstructure tunability analysis for an out-of-plane capacitive detection MEMS magnetometer
- Technical Paper
Mohamed Hadj Said, Farès Tounsi, Petros Gkotsis, Brahim Mezghani, Laurent A. Francis
Evaluation of Si liquid cooling structure with microchannel and TSV for 3D application
- Technical Paper
Manseok Park, Sungdong Kim, Sarah Eunkyung Kim
Workspace analysis of a 6-DOF cable-driven parallel robot considering pulley bearing friction under ultra-high acceleration
- Technical Paper
Jun-Mu Heo, Sung-Hyun Choi, Kyoung-Su Park
Thermal behavior modeling and characteristics analysis of electrothermal microactuators
- Technical Paper
Tiqiang Shan, Xinglin Qi, Liang Cui, Xiaodong Zhou
Electro-thermo-mechanical nonlinear free vibration of nanobeam resting on the winkler-pasternak foundations based on nonlocal elasticity using differential transform method
- Technical Paper
Misagh Zarepour, Seyyed Amirhosein Hosseini, Mohammad Reza Kokaba
A novel research on serpentine microchannels of passive micromixers
- Technical Paper
Xueye Chen, Tiechuan Li, Zengliang Hu
A micropipette system based on low driving voltage carbon nanotube actuator
- Technical Paper
Kenji Goya, Yusuke Fuchiwaki, Masato Tanaka, Raphael Addinall, Toshihiko Ooie, Takushi Sugino, Kinji Asaka
Comparative study of conventional and magnetically coupled piezoelectric energy harvester to optimize output voltage and bandwidth
- Technical Paper
Dauda Sh. Ibrahim, Asan G. A. Muthalif, N. H. Diyana Nordin, Tanveer Saleh
Study on solving method for output signal of frequency resonant gyroscope
- Technical Paper
Le Cao, Shangchun Fan, Zhanshe Guo, Cheng Li
Experimental and computational study of gas bubble removal in a microfluidic system using nanofibrous membranes
- Technical Paper
Hamed Gholami Derami, Ravindra Vundavilli, Jeff Darabi
Design and fabrication of micro-nano fusion gas sensor based on two-beam micro-hotplatform
- Technical Paper
Lianfeng Guo, Lei Xu, Zongke Xu, Guotao Duan, Yi Wang, Hong Zhou, Yanxiang Liu, Weiping Cai, Yuelin Wang, Tie Li
Comparative evaluation of detachable mold fixing methods aimed at low energy loss for ultrasonic nanoimprint lithography
- Technical Paper
Harutaka Mekaru, Takayuki Yano
Quantitative analysis of temperature effect on SOI piezoresistive pressure sensors
- Technical Paper
Vinod Belwanshi, Anita Topkar
Fringing capacitance and tolerance of DRIE effect on the performance of bulk silicon comb-drive actuator
- Technical Paper
Chunhua Cai, Ming Qin
Buckling of double functionally-graded nanobeam system under axial load based on nonlocal theory: an analytical approach
- Technical Paper
O. Rahmani, S. A. H. Hosseini, M. Parhizkari
Thermal annealing effects on the stress stability in silicon dioxide films grown by plasma-enhanced chemical vapor deposition
- Technical Paper
Jianyu Fu, Haiping Shang, Zhigang Li, Weibing Wang, Dapeng Chen
Design and simulation of a novel flip-chip structure for THz detector package
- Technical Paper
Haidong Hao, Zhen Tang, Hongda Lu, Lifeng Cheng, Xin Lv
Efficient batch-mode mixing and flow patterns in a microfluidic centrifugal platform: a numerical and experimental study
- Technical Paper
Sayyed Mohammad Ali Mortazavi, Pooyan Tirandazi, Modjtaba Normandie, Mohammad Said Saidi
Research on a micromachined flexible hot-wire sensor array for underwater wall shear stress measurement
- Technical Paper
Jian Tang, Weiping Zhang, Wu Liu, Honghai Chen, Yongming Sun
Electrostatic tuning in linear regime for 25.9-MHz micromechanical resonator with 120-nm capacitive gap
- Technical Paper
Weilong You, Lei Zhang, Xiaofei Wang, Wenshan Wei, Weifeng Xia, Heng Yang, Xinxin Li
Simulation of CNT based mass resonator sensor and investigation on the effect of vacancy defect on sensing performances
- Technical Paper
Hassan Gharaei, Alireza Nikfarjam, Foad Saniei, Ahmad Abbasi
Layer-dependent characterization of wear behaviour on variothermal injection moulded micro parts using pin on disc measurements
- Technical Paper
Steve Meister, Sebastian Hertle, Dietmar Drummer
12-inch X-ray optics based on MEMS process
- Technical Paper
Kumi Ishikawa, Yuichiro Ezoe, Masaki Numazawa, Tomohiro Ogawa, Mayu Sato, Kasumi Nakamura, Takaya Ohashi, Kazuhisa Mitsuda, Ryutaro Maeda, Hiroshi Hiroshima, Yuichi Kurashima, Daiji Noda
Design of a micro manipulation device for cell microinjection
- Technical Paper
Pin Lv, Xiaolu Zhu, Aimin Ji
Uncertainty analysis for design and optimization of a micro Coriolis mass flow sensor
- Technical Paper
Dan Feng, Shangchun Fan, Dezhi Zheng, Huichao Shi
Sidewall spacer layer engineering for improvement of analog/RF performance of nanoscale double-gate junctionless transistors
- Technical Paper
Debapriya Roy, Abhijit Biswas
Buckling analysis of graphene sheets using nonlocal isogeometric finite element method for NEMS applications
- Technical Paper
Ahmad Soleimani, Mohammad Hasan Naei, Mahmoud Mosavi Mashhadi
Vanadium oxide thermal microsensor integrated in a microfluidic chip for detecting cholesterol and glucose concentrations
- Technical Paper
Naoki Inomata, Libao Pan, Zhuqing Wang, Mitsuteru Kimura, Takahito Ono
Numerical Investigations on Mixing in Microchannels with Transverse Hydrophobic Strips
- Technical Paper
Cletus Jaimon, S. Kumar Ranjith
Polymer bonding of GaN crystal layer on silicon substrate for micro mechanical resonator applications
- Technical Paper
Takashi Sasaki, Yuta Hayakawa, Kazuhiro Hane
Analytical study on effect of piezoelectric patterns on frequency shift and support loss in ring-shaped resonators for biomedical applications
- Technical Paper
Yang Liu, Dingkang Wang, Dong F. Wang
Warpage of embossed thermoplastic substrates and the effects on solvent bonding
- Technical Paper
Pin-Chuan Chen, Ya-Chiao Yen
Investigation of asymmetric high-k underlap spacer (AHUS) hybrid FinFET from temperature perspective
- Technical Paper
K. P. Pradhan, Priyanka, P. K. Sahu
Development of thick film, CMOS compatible planar millimetre-wave antenna for antennas in package applications
- Technical Paper
L. K. Sandoval Granados, R. S. Murphy Arteaga
Modeling the effect of microstructure on the coupled torsion/bending instability of rotational nano-mirror in Casimir regime
- Technical Paper
M. Keivani, A. Koochi, J. Mokhtari, N. Abadian, M. Abadyan
Polyurethane-rubber punching process for micro-hole arrays
- Technical Paper
Jing Sun, Shining Zhou, Xiaolong Yang, Yingjie Xing, Xin Liu
A smartphone-based point-of-care diagnosis of H1N1 with microfluidic convection PCR
- Technical Paper
Xianbo Qiu, Shengxiang Ge, Pengfei Gao, Ke Li, Shuo Yang, Shiyin Zhang, Xiangzhong Ye, Ningshao Xia, Shizhi Qian
Facile fabrication of helical microfluidic channel based on rope coiling effect
- Technical Paper
Wei-min Yang, Tang-kui Zhu, Yu-an Jin, Jian-zhong Fu
Low-noise and small-area integrated amplifier circuit for mems-based implantable hearing aid applications
- Technical Paper
Nazli Zargarpour, Hamid Abdi, Hamid Jangi Bahador
Non-linear static stability of bi-layer carbon nanosheets resting on an elastic matrix under various types of in-plane shearing loads in thermo-elasticity using nonlocal continuum
- Technical Paper
Mohammad Malikan, Mehrdad Jabbarzadeh, Shahriar Dastjerdi
Development of a novel large stroke 2-DOF micromanipulator for micro/nano manipulation
- Technical Paper
Xiao Xiao, Yangmin Li, Shunli Xiao
Reducing electrowetting-on-dielectric actuation voltage using a novel electrode shape and a multi-layer dielectric coating
- Technical Paper
M. F. Samad, Abbas Z. Kouzani, M. F. Hossain, M. I. Mohammed, M. N. H. Alam
Erratum to: Dynamic analysis of a recirculation system of micro functional fluids for ink-jet applications
- Erratum
Ivan Arango, Manuel Cañas
Erratum to: Temperature control and readout circuit interface for Mox based NH3 gas sensor
- Erratum
Dharmendra Kumar Sharma, Rama Sai Vinay Dwara, B. A. Botre, S. A. Akbar, Kaushal Kishore
