Ausgabe 9-10/2013 Special Issue of ASME-ISPS / JSME-IIP Joint International Conference on Micromechatronics for Information and Precision Equipment, Santa Clara, CA, USA, 18-20, June, 2012
Inhalt (54 Artikel)
The 4th ASME-ISPS/JSME-IIP joint international conference on micromechatronics for information and precision equipment, Santa Clara, California, USA
- Editorial
Eng Hong Ong, Kenji Fukuzawa, Jen-Yuan Chang
A fast battery charging algorithm for an intelligent PV system with capability of on-line temperature compensation
- Technical Paper
Paul C.-P. Chao, Wei-Dar Chen, Chun-Wei Cheng
Position error signal generation in hard disk drives based on a field programmable gate array (FPGA)
- Technical Paper
Shaomin Xiong, David Bogy
Hard-particle-induced physical damage and demagnetization in the head-disk interface
- Technical Paper
Jia Zhao, Shaomin Xiong, David B. Bogy, Kun Sun, Liang Fang
In-plane detection of scattered light from a minute particle using a resin-based light waveguide incorporated with a microfluidic channel
- Technical Paper
Toshifumi Ohkubo, Nobuyuki Terada, Yoshikazu Yoshida
A low-power self-biased rail-to-rail preamplifier as a readout circuit for a capacitor-type microphone
- Technical Paper
Tse-Yi Tu, Paul C. -P. Chao, Yueh-Teng Mai
Design of carriage with two-layer coils for hard disk drive actuator
- Technical Paper
Kenji Suzuki, Mutsuro Ohta
Feedforward stability control of active slider in sub-nanometer spacing regime
- Technical Paper
G. Sheng, L. Huang, J.-Y. Chang
Electromagnetic micro energy harvester for human locomotion
- Technical Paper
Pratik Patel, Mir Behrad Khamesee
Adaptive flying height modulation control of hybrid active slider with thermal and piezoelectric actuators
- Technical Paper
L. Huang, G. Sheng, J. -Y. Chang
Experimental study of slider dynamics induced by contacts with disk asperities
- Technical Paper
Wenping Song, Liane Matthes, Andrey Ovcharenko, Bernhard Knigge, Frank E. Talke
A numerical investigation of different touchdown patterns of thermal-flying-height-control sliders
- Technical Paper
Jinglin Zheng, David B. Bogy
Ultraviolet bonding of perfluoropolyethers to carbon surfaces investigated using quantum chemical methods
- Technical Paper
Md. Khorshed Alam, Hedong Zhang, Nobuaki Koga, Satoru Iuchi
Numerical investigation of slider dynamics induced by contacts with disk asperities
- Technical Paper
Wenping Song, Pablo A. Salas, Andrey Ovcharenko, Hao Zheng, Frank E. Talke
Probabilistic analytic center cutting plane method in robust track following control
- Technical Paper
Mohammadreza Chamanbaz, Venkatakrishnan Venkataramanan, Qing-Guo Wang
Navigation of a robotic capsule endoscope with a novel ultrasound tracking system
- Technical Paper
Jan D. J. Gumprecht, Tim C. Lueth, Mir Behrad Khamesee
A new hybrid fabrication process for a high sensitivity MEMS microphone
- Technical Paper
Paul C.-P. Chao, Chun-Yin Tsai, Chi-Wei Chiu, Che-Hung Tsai, Tse-Yi Tu
A self-alignment crowned pulley design for high speed paper media transport systems
- Technical Paper
Young-Boo Son, Seung Hoon Shin, Sang-Hoon Ji, Yeon-Sun Choi, Ja Choon Koo
Simulation studies of contact sensor for disk defect mapping
- Technical Paper
Jin Liu, Junguo Xu, Jianhua Li
Performance analysis of an integrated piezoelectric ZnO sensor for detection of head–disk contact
- Technical Paper
Yanhui Yuan, Hejun Du, Kun Shyong Chow, Mingsheng Zhang, Shengkai Yu, Bo Liu
Modeling laser heated thin film media for heat assisted magnetic recording
- Technical Paper
Peng Yu, Weidong Zhou, Shengkai Yu, Kyaw Sett Myo
Analysis of the oil injection process in fluid dynamic bearings of the spindle motor of computer hard disk drives
- Technical Paper
Yeonha Jung, Gunhee Jang, Kyungmoon Jung, Hokyung Jang
Behavior analysis of air bubbles in the oil lubricant of FDBs at low speed operating conditions
- Technical Paper
Kyungmoon Jung, Jihoon Lee, Yeonha Jung, Hokyung Jang, Gunhee Jang
Head-positioning control system using thermal actuator in hard disk drives
- Technical Paper
Masaki Odai, Takenori Atsumi, Haruaki Otsuki, Toshihiro Arisaka
Optimal design of fluid dynamic bearings to develop a robust disk-spindle system in a hard disk drive utilizing modal analysis
- Technical Paper
Jihoon Lee, Gunhee Jang, Kyungmoon Jung
Twyman-Green interferometer using virtual optics for eliminating reference wave
- Technical Paper
Cheol-Ki Min, Sungbin Jeon, Hyungbae Moon, Kyoung-Su Park, No-Cheol Park, Hyunseok Yang, Young-Pil Park
Tribological characteristics of novel branched perfluoropolyether lubricant films in hard disk drives
- Technical Paper
Norio Tagawa, Hiroshi Tani
An experimental study on the flow behavior near the read-and-write arm in a hard disk drive model with a shroud opening
- Technical Paper
Katsuaki Shirai, Lars Büttner, Shinnosuke Obi, Jürgen Czarske
Magnetically induced vibration of a flexible rotating disk-spindle system due to the internal magnetic force arising from the spindle motor of a HDD
- Technical Paper
Kiyong Park, Sangjin Sung, Gunhee Jang
A position measurement system for precision alignment of roll-to-roll printing and sensitivity analysis of thermal deformation
- Technical Paper
Youngwon Seo, Yong-Moo Kim, Dongho Oh
Integrated servo-mechanical design of high-performance mechatronics using generalized KYP Lemma
- Technical Paper
Yan Zhi Tan, Chee Khiang Pang, Fan Hong, Tong Heng Lee
Circuit model for piezoelectric actuator with electrically conductive epoxy
- Technical Paper
Yanning Liu, Xin Wang, Yi Lu
Design principle of micromechanical probe with an electrostatic actuator for friction force microscopy
- Technical Paper
Kenji Fukuzawa, Hiroaki Tsuji, Satoshi Hamaoka, Mitsuhiro Shikida, Shintaro Itoh, Hedong Zhang
A novel universal joint with PZT-driven cyclic symmetric stator
- Technical Paper
Hong-Yi Cheng, Jen-Yuan (James) Chang
Experimental study of lubricant depletion in heat assisted magnetic recording: different lubricants on HAMR media
- Technical Paper
Xiuying Chen, Yansheng Ma, Bo Liu, Huiqing Xie, Rong Ji
Analysis of contact phenomena between a head stack assembly and disk during operational shock
- Technical Paper
Seokhwan Kim, Geonyup Lim, No-Cheol Park, Young-Pil Park, Hyun-Chul Lee, Ju-Ho Kim, Kyoung-Su Park
Study on head instability using Flying-QST tester for HDDs
- Technical Paper
Masaru Furukawa, Junguo Xu, Yukio Kato, Tatsuhiko Wada
Development of a new spindle motor for a hard disk drive
- Technical Paper
Dae-Kyu Jang, Jung-Hwan Chang
Thermal mechanics of a contact sensor used in hard disk drives
- Technical Paper
Jianhua Li, Junguo Xu, Jin Liu, Hidekazu Kohira
Design of modified shock isolators for the optical pickup in an ODD by analytical and experimental methods
- Technical Paper
Wonseok Oh, Seungho Lim, Kyoung-Su Park, No-Cheol Park, Young-Pil Park, Jae-Sung Lee, Han-Baek Lee
Touch-down induced contact and friction forces at the dimple/gimbal interface
- Technical Paper
Zhengqiang Tang, Pablo A. Salas Mendez, John Hogan, Frank E. Talke
Design of an auto-focusing actuator with a flexure-based compliant mechanism for mobile imaging devices
- Technical Paper
Choong Kim, Myeong-Gyu Song, YoungJun Kim, No-Cheol Park, Kyoung-Su Park, Young-Pil Park, Kyung Sik Shin, Jeen Gi Kim, Geum Sik Lee
Vision-assisted profile inspection system of inhomogeneous flex circuits in hard disk drives
- Technical Paper
Ching-Chen Chen, Jen-Yuan Chang
Intelligent diagnosis of structural cracks with optimized sensing network
- Technical Paper
Shudong Liu, Chunling Du, Jingliang Zhang
Theoretical study of van der Waals dispersion force between macroscopic bodies with a periodic material distribution
- Technical Paper
Hiroshige Matsuoka, Niki Kitahama, Shigehisa Fukui
Optimizing angular placements of the LEDs in a LCD backlight module for maximizing optical efficiency
- Technical Paper
Paul C.-P. Chao, Che-Hung Tsai, Jiun-De Li, Wei-Dar Chen
Effect of temperature and helium ratio for performance of thermal flying control in air–helium gas mixture
- Technical Paper
Kyoung-Su Park, Jonghak Choi, No-Cheol Park, Young-Pil Park
Dynamic flying characteristics of an air bearing slider over a disk with grooves and distribution of material properties
- Technical Paper
Shigehisa Fukui, Atsusi Oono, Hiroshige Matsuoka
Attenuation of rotating disk vibrations with sector-shaped plates in disk storage devices
- Technical Paper
Kai-Ming Tsai, Jen-Yuan (James) Chang
Improved design of polymeric composite electrothermal micro-actuator for high track density hard disk drives
- Technical Paper
J. P. Yang, G. K. Lau, C. P. Tan, N. B. Chong, B. Thubthimthong, L. Gonzaga, Z. M. He
