Ausgabe 9/2020
Inhalt (35 Artikel)
Material selection for optimum design of MEMS pressure sensors
- Open Access
- Technical Paper
Zahid Mehmood, Ibraheem Haneef, Florin Udrea
Directional liquid spreading on laser textured aluminum surface
- Technical Paper
Chengyun Zhang, Lang Cheng, Bo Tan, Zhifeng Chen, Wei Zhang, Zuolian Liu, Jun Peng
Process windows of ultrasonic thermoforming of micro structures
- Open Access
- Technical Paper
Yu-Jiang Peng, Werner Karl Schomburg
MEMS based antenna of energy harvester for wireless sensor node
- Technical Paper
Noor Hidayah Mohd Yunus, Jahariah Sampe, Jumril Yunas, Alipah Pawi, Zeti Akma Rhazali
DC and analog/RF performance analysis of gate extended U-shaped channel tunnel field effect transistor
- Technical Paper
Radhe Gobinda Debnath, Karabi Baruah, Srimanta Baishya
An experimental study on precision positioning characteristics of shape memory alloy actuator
- Technical Paper
Sungwoo Park, Donghyun Hwang
Designing a novel model of 2-DOF large displacement with a stepwise piezoelectric-actuated microgripper
- Technical Paper
Xiaodong Chen, Zilong Deng, Siya Hu, Jinhai Gao, Xingjun Gao
Design and experiment of a focused acoustic sorting chip based on TSAW separation mechanism
- Technical Paper
Guojun Liu, Zhiqiang Li, Xinbo Li, Yan Li, Huajie Tang, Meng Wang, Zhigang Yang
Design, optimization and analysis of reconfigurable antenna using RF MEMS switch
- Technical Paper
Shivam Goel, Navneet Gupta
Monolithic integration of MEMS thermal flow sensor and its driving circuit onto flexible Cu on polyimide film
- Technical Paper
A. Kato, Y. Hasegawa, K. Taniguchi, M. Shikida
Dynamic modeling of syringe-pump-actuated microliquid-dispensing system by a bond-graph approach
- Technical Paper
Yizhou Long, Yupei Zhao, Shizhou Lu, Jun Gao, Pan Qu, Caiyi Zhang
Design, fabrication, and characterization of SU-8/carbon black nanocomposite based polymer MEMS acceleration sensor
- Technical Paper
Aftab Ahmed, Awatef Khlifi, Shardul Pandit, Rajul Patkar, Anjali Joshi, Pradeep Dixit, Brahim Mezghani, Maryam Shojaei Baghini
Modelling and optimization of single drive 3-axis MEMS gyroscope
- Technical Paper
Hussamud Din, Faisal Iqbal, Byeungleul Lee
A micro monolithic integrated force-torque sensor with piezoelectric tuning mechanism
- Technical Paper
Ran Meng, Weiping Zhang, Sui Zhou, Chenyang Wang, Jiaxin Zhao, Wei Ge
A theoretical analysis of large deformation of nanobeams with surface energy
- Technical Paper
Fan Yang, Chengbo Li
Design of flexure-based modular architecture micro-positioning stage
- Technical Paper
Bingxiao Ding, Zhixin Yang, Yangmin Li
Effects of surface roughness on transient squeeze EHL motion of circular contacts with micropolar fluids
- Technical Paper
Li-Ming Chu, Yuh-Ping Chang, Hsiang-Chen Hsu
An alternative of low-cost automation based on a minicomputer for edge computing
- Technical Paper
Felipe J. Torres, Fabrizio López, Diego A. Núñez, Antonio J. Balvantín, Oscar J. Ramos, Fabio A. Aguirre
An investigation of static bending of a bi-directional strain-gradient Euler–Bernoulli nano-beams with the method of initial values
- Technical Paper
Murat Çelik, Reha Artan
3D modeling of graphene oxide based nanoelectromechanical capacitive switch
- Technical Paper
Rekha Chaudhary, Prasantha R. Mudimela
Anchor loss optimization for magnetic flux modulation structure of magnetoresistive sensor
- Technical Paper
Qingfa Du, Kun Sun, Jiafei Hu, Mengchun Pan, Dixiang Chen, Xinmiao Zhang, Peisen Li, Junsheng Zhang, Qi Zhang
Development of stick–slip nanopositioning stage capable of moving in vertical direction
- Technical Paper
Peng Pan, Junhui Zhu, Sen Gu, Changhai Ru
Characterization and analysis of a novel structural SOI piezoresistive pressure sensor with high sensitivity and linearity
- Technical Paper
Chuang Li, Libo Zhao, José L. Ocaña, Francisco Cordovilla, Zhen Yin
Bi-stability behavior in electrostatically actuated non-contact based micro-actuator
- Technical Paper
Hassen M. Ouakad, Issam M. Bahadur
A high sensitive graphene piezoresistive MEMS pressure sensor by integration of rod beams in silicon diaphragm for low pressure measurement application
- Technical Paper
Meetu Nag, Jaideep Singh, Ajay Kumar, Kulwant Singh
A novel capacitive mass sensor using an open-loop controlled microcantilever
- Technical Paper
R K Godara, Atul Kumar Sharma, Nishu Joshi, M M Joglekar
Influence of geometric parameters on the fluidic and mixing characteristics of T-shaped micromixer
- Technical Paper
Xuekuan Zhan, Dalei Jing
Dynamic characteristics and experiment of push–pull high-power ultrasonic consolidation resonance system for metal foil
- Technical Paper
Xiangqiang Zhong, Weiqing Huang, Huajie Fang, Zhimin Di, Yin Wang
Modeling and experimental investigation of damage initiation and propagation of LQFP package under thermal cycle
- Technical Paper
Ayda Halouani, Abel Cherouat, Mariem Miladi Chaabane, Mohamed Haddar
Investigating mechanical, thermal and rheological properties of polypropylene/carbon nanotubes composites
- Technical Paper
M. Sahli, T. Barrière, X. Roazard, M. Assoul
Epoxy polymer optical waveguide for micro-opto-electro-mechanical systems
- Technical Paper
Václav Prajzler, Václav Chlupatý
Stability analysis of solar based induction heater
- Technical Paper
Sujit Dhar, Pradip Kumar Sadhu, Debabrata Roy, Soumya Das, Dwaipayan Das
A hybrid system for imbalanced data mining
- Technical Paper
Zne-Jung Lee, Chou-Yuan Lee, So-Tsung Chou, Wei-Ping Ma, Fulan Ye, Zhen Chen
Correction to: Simulation, mathematical modeling, fabrication and experimental analysis of piezoelectric acoustic sensor for energy harvesting applications
- Correction
Vasudha Hegde, Siva S. Yellampalli, H. M. Ravikumar
Correction to: Investigating mechanical, thermal and rheological properties of polypropylene/carbon nanotubes composites
- Correction
M. Sahli, T. Barrière, X. Roizard, M. Assoul
