nach oben

Erschienen in:

2015 | OriginalPaper | Buchkapitel

Modeling and Dynamic Force Simulation for Detection of Profile Error in Spur Gear Pair

verfasst von : Atul B. Andhare, Manish Kumar Verma

Erschienen in: Vibration Engineering and Technology of Machinery

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper describes modeling and simulation of spur gear pair in Adams–View. Initially, virtual model of an ideal gear pair is created in Adams and variation of the dynamic force is obtained by considering the tooth mesh stiffness and mesh damping coefficient. The magnitude of force variation thus obtained is confirmed with the design calculations. The dynamic force magnitudes thus obtained and those found in Adams are closely matching. Later on, tooth profile error is introduced in the gear pair by removing part of involute surface from one of the gears making one tooth surface as flat. Dynamic force variation is now obtained for the defective gear pair. After comparing the dynamic forces for defect free and defective gear pairs, it is found that change in dynamic force pattern is a good indicator of tooth profile error in spur gears.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Effect of the Rail Support Stiffness on the Occurrence Propensity of Rail Corrugation Based on the Self-excited Vibration of a Wheel-Rail System

Nächstes Kapitel Availability Improvement by Early Detection of Motor Bearing Failure Using Comprehensive Condition Monitoring Techniques at DTPS

Chaari F, Zimroz R, Bartelmus W, Fakhfakh T, Haddar M (2011) Modeling of local damages in spur gears and effects on dynamics response in presence of varying load conditions. Proceedings of Surveillance 6, UTC Complegne, pp 1–19

Korka Z (2007) An overview of mathematical models used in gear dynamics. Rom J Acoust Vib 4(1):43–50

Chen P, Feng F, Toyota T (2001) Dynamic analysis method of fault gear equipment. COMADEM 2001, proceedings of the 14th international congress, Elsevier Science Ltd. pp 419–426

Howard I, Jia S, Wang J (2001) The dynamic modeling of spur gear in mesh including friction and a crack. Mech Syst Signal Process 15(5):831–853CrossRef

Shing TK, Tsai LW, Krishnaprasad PS An improved model for the dynamics of spur gear systems with backlash consideration. Technical research report, Institute for Systems Research, University of Maryland

Kamble N, Saha SK (2007) Developing a virtual prototype of a rack and pinion steering system. Int J Veh Syst Model Test 2(1):61–79

Li S (2007) Effects of machining errors, assembly errors and tooth modifications on loading capacity, load-sharing ratio and transmission error of a pair of spur gears. Mech Mach Theory 42:698–726CrossRefMATH

Vedmar L, Andersson A (2003) A method to determine dynamic load on spur gear teeth and on bearing. J Sound Vib 267(5):1065–1084CrossRef

Hiroaki E, Nader S (2012) Gearbox simulation models with spur gear and bearing faults. In: Gokcek M (ed.) Mechanical engineering, InTech

10.

Choy FK, Ruan YF, ZakrajsekJJ, Oswald FB (1992) Modal simulation of gearbox vibration with experimental correlation. 28th joint propulsion conference and exhibit cosponsored by the AIAA, SAE, ASME and ASEE, Nashville, Tennessee, July 1992. pp 1–15

11.

MSC Inc., MSC ADAMS reference manual

12.

Dudley DW (1992) Gear handbook: the design, manufacture and application of gears. McGraw-Hill Book Company

13.

Kiekbusch T, Howard I (2007) A common formula for the combined torsional mesh stiffness of spur gears. Proceedings of the Fifth Australasian congress on applied mechanics, ACAM 2007

14.

Fernandez del Rincon A, Viadero F, Iglesias M, García P, de-Juan A, Sancibrian R (2013) A model for the study of meshing stiffness in spur gear transmission. Mech Mach Theory 61:30–58CrossRef

15.

Khabou MT, Bouchaala N, Chaari F, Fakhfakh T, Haddar M (2011) Study of a spur gear dynamic behavior in transient regime. Mech Syst Signal Proc 25:3089–3101CrossRef

16.

Li S, Kahraman A (2011) A spur gear mesh interface damping model based on elastohydrodynamic contact behavior’. Int J Powertrains 1(1):4–21CrossRef

Titel: Modeling and Dynamic Force Simulation for Detection of Profile Error in Spur Gear Pair
verfasst von: Atul B. Andhare
Manish Kumar Verma
Verlag: Springer International Publishing
Buch: Vibration Engineering and Technology of Machinery
Print ISBN: 978-3-319-09917-0

Electronic ISBN: 978-3-319-09918-7

Copyright-Jahr: 2015
DOI: https://doi.org/10.1007/978-3-319-09918-7_97

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht